Mitutoyo 293-832 Digital Micrometer, Inch/Metric 0-1", w/o Data Output
The Mitutoyo 293-832 is a Series 293 inch/metric digital outside micrometer with a 0-1" (0-25.4 mm) measuring range and no data output. It is designed for everyday external measurement in workshops, inspection areas and bench applications where readings are recorded manually. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia.
Part No.: 293-832
Contact: +966 531 321586
The Mitutoyo 293-832 provides a clear digital readout for quick and straightforward external measurements. Its inch/metric display makes it suitable for workshops working with both measurement systems, while the 0-1" (0-25.4 mm) range covers common small-part measurement requirements.
A constant-force device helps provide repeatable measurements, with the specific type fitted to this model to be confirmed with our team. As a no-output model, the 293-832 is suitable for applications where measurements are read from the display and recorded manually rather than transferred to an SPC or data collection system.
For improved accuracy, allow the micrometer and workpiece to reach the same temperature before measuring and avoid holding the frame for extended periods. The available product information does not specify an IP rating. For applications around coolant or cutting oil, ask our team about an IP65 coolant-proof Series 293 model.
Key Benefits
-
Clear digital inch/metric readout
-
0-1" (0-25.4 mm) measuring range
-
Simple and reliable Mitutoyo design
-
Constant-force device for repeatable measurements
-
No data output for straightforward manual measurement
-
Suitable for bench and inspection applications
-
Genuine Mitutoyo quality
-
Genuine Mitutoyo from an authorised distributor in Saudi Arabia
For pricing, stock availability and lead time, call +966 531 321586.
Who This Product Is Best For
-
Bench and inspection work where readings are recorded manually
-
Workshops working with inch and metric drawings
-
General workshop measurement
-
Training and educational applications
-
Users who do not require SPC or digital data output
How to Specify & Install It
-
Clean the anvil and spindle measuring faces before use.
-
Close the measuring faces using the constant-force device and set the zero.
-
Position the micrometer around the workpiece and gently bring the spindle into contact.
-
Apply consistent measuring force without forcing the spindle.
-
Read the digital display and record the measurement.
-
Clean the measuring faces after use and store the micrometer properly.
Frequently Asked Questions
Does the Mitutoyo 293-832 have data output?
No. The 293-832 is a no-output model intended for manually recorded measurements.
Can it display both inch and metric measurements?
Yes. It is an inch/metric digital micrometer.
What is the measuring range?
The measuring range is 0-1" (0-25.4 mm).
What type of constant-force device does it use?
The product information confirms a constant-force device but does not specify the exact type. Contact our team to confirm the configuration.
Which is better, a friction thimble or a ratchet stop?
Both are designed to provide consistent measuring force. A ratchet stop provides a distinct clicking action, while a friction thimble provides a smoother, more direct feel. The preferred type depends mainly on operator preference.
Is the 293-832 coolant proof?
The available product information does not specify an IP protection rating. If the micrometer will be used around coolant or cutting oil, ask our team about an IP65 coolant-proof Series 293 model.
Should I choose the 293-832 or 293-832-30?
Both models cover 0-1" (0-25.4 mm). The appropriate model depends on the specific configuration and features required for your application. Our team can help confirm the differences before ordering.
How should I care for the instrument?
Wipe the measuring faces clean after use and store the micrometer in its case away from excessive heat, humidity and coolant. Regular calibration is recommended for reliable measurement results.
Can the Mitutoyo 293-832 be calibrated?
Yes. General Tech Saudi can arrange calibration services for dimensional measuring instruments.
Can you supply other Mitutoyo instruments?
Yes. General Tech supplies a wide range of Mitutoyo micrometers, bore gauges, calipers, indicators and other precision measuring instruments.
Is genuine Mitutoyo available in Saudi Arabia?
Yes. General Tech is an authorised Mitutoyo distributor in Saudi Arabia.
Contact: +966 531 321586
