Mitutoyo 293-180-40 QuantuMike Digital Micrometer, Range 0 ~ 1″/25.4mm
The Mitutoyo 293-180-40 is a QuantuMike IP65 coolant-proof digital micrometer with a 0-1" (0-25.4 mm) measuring range, 0.00005" / 0.001 mm resolution, and SPC data output. Its 2 mm spindle feed per revolution allows faster adjustment than conventional micrometers, while the ratchet thimble provides consistent measuring force for repeatable measurements. It is suitable for machine shops, inspection environments, and quality applications where fast measurement and digital data collection are required.
Part No.: 293-180-40
Contact: +966 531 321586
The QuantuMike design moves the spindle 2 mm per revolution, making it up to four times faster to bring the spindle onto the workpiece compared with a conventional 0.5 mm-per-revolution micrometer. IP65 protection makes it suitable for environments where coolant and cutting oil are present. The digital display provides inch/metric measurement with 0.00005" / 0.001 mm resolution, while the SPC output allows readings to be transferred directly to data collection systems. For accurate results, allow the micrometer and workpiece to reach the same temperature before measurement and avoid prolonged contact with the frame.
Key Benefits
-
2 mm spindle feed per revolution for faster measurement
-
Up to 4× faster spindle movement than standard micrometers
-
IP65 coolant-proof construction
-
Ratchet thimble for consistent measuring force
-
0-1" (0-25.4 mm) measuring range
-
0.00005" / 0.001 mm resolution
-
Inch/metric measurement
-
SPC data output for digital data collection
-
Genuine Mitutoyo supplied through an authorised distributor in Saudi Arabia
Call +966 531 321586 for pricing and stock availability.
Who This Product Is Best For
-
Machine shops measuring parts with different dimensions throughout the day
-
Inspection applications where coolant and cutting oil are present
-
Quality control teams collecting measurement data for SPC
-
Workshops requiring faster spindle adjustment for repeated measurements
How to Specify & Install It
-
Clean the anvil and spindle measuring faces before use.
-
Close the measuring faces using the ratchet thimble and set the origin.
-
Spin the spindle quickly toward the workpiece using the fast spindle feed.
-
Use the ratchet thimble when contacting the workpiece to apply consistent measuring force.
-
Read the digital measurement or transfer the value through the SPC output.
-
Clean the measuring faces after use and store the micrometer properly.
Frequently Asked Questions
Why is the Mitutoyo 293-180-40 QuantuMike faster?
The spindle moves 2 mm per revolution, compared with approximately 0.5 mm per revolution on a conventional micrometer, allowing faster adjustment.
Is the Mitutoyo 293-180-40 coolant proof?
Yes. It has an IP65 protection rating and is designed for use around coolant and cutting oil.
What is the measuring range?
The measuring range is 0-1" (0-25.4 mm).
What is the resolution?
The resolution is 0.00005" / 0.001 mm.
Does it have SPC data output?
Yes. The micrometer provides data output for transferring readings to compatible SPC and data collection systems.
Does it measure in both inch and metric units?
Yes. The 293-180-40 supports inch/metric measurement.
How should I care for the instrument?
Wipe the measuring faces clean after use and store the micrometer in its case away from excessive heat, humidity, and coolant. Remove the battery if the instrument will be stored for an extended period.
Can the Mitutoyo 293-180-40 be calibrated?
Yes. General Tech Saudi provides calibration services for dimensional measuring instruments. Contact the team when ordering if calibration is required.
Can you supply other Mitutoyo instruments?
Yes. General Tech supplies a wide range of Mitutoyo micrometers, bore gauges, calipers, indicators, and other precision measuring instruments.
Is genuine Mitutoyo available in Saudi Arabia?
Yes. General Tech is an authorised Mitutoyo distributor in Saudi Arabia.
Call +966 531 321586 for pricing, availability, and lead time.
