Mitutoyo 2901AB-10 | Dial Gauge | Flat Back | ISO Type | Series 2 | One Revolution | Jewelled Bearing | Graduation 0.001mm | Range 0.16 mm
Genuine Mitutoyo instruments from General Tech Services LLC, Saudi Arabia, with free Saudi Arabia shipping available.
Part No. 2901AB-10
Product Overview
The Mitutoyo 2901AB-10 is an analogue mechanical dial gauge from Mitutoyo Series 2, designed for comparative measurement, runout inspection, machine setup and dimensional checking where fine metric readings are required.
It provides a 0.16 mm measuring range with a 0.001 mm graduation. The metric-reading dial is suited to applications where small dimensional deviations need to be observed during inspection, comparison or machine setup.
The 2901AB-10 uses a one-revolution dial design, with the full measuring range covered in less than one pointer revolution. This allows the measurement to be read directly from the dial without tracking multiple pointer turns, which can be useful for comparative and go/no-go inspection.
A jewelled bearing supports the indicator mechanism and helps provide smooth pointer movement. This feature is particularly relevant for applications involving fine graduations and repeated comparative readings.
The flat-back configuration is intended for compatible mounting arrangements where the rear of the gauge is positioned against a holder or fixture. The ISO type designation identifies the gauge with metric-oriented dimensional conventions for compatible mounting systems.
Typical applications include checking runout and concentricity on machine tools, comparing flatness and height on a surface plate, and setting fixtures and tooling. Before ordering, confirm the measuring range, graduation, back configuration and mounting arrangement against your application.
The suffix in 2901AB-10 identifies the exact product variant, so the complete part number should be used when ordering or replacing an existing gauge.
General Tech Services LLC supplies genuine Mitutoyo measuring instruments to industrial customers across Saudi Arabia. For a quotation, provide the part number, required quantity and delivery city so the team can confirm availability and pricing.
Key Benefits
- 0.001 mm graduation for fine metric comparative readings
- 0.16 mm measuring range
- One-revolution dial for direct reading across the full range
- Jewelled bearing for smooth pointer movement
- Mitutoyo Series 2 mechanical design
- Flat-back configuration for compatible fixture and holder mounting
- ISO type for metric-oriented mounting applications
- Genuine Mitutoyo instrument with free Saudi Arabia shipping available
Who This Product Is Best For
The Mitutoyo 2901AB-10 is suitable for:
- Quality inspectors performing fine comparative measurement
- Machinists checking runout and setting up machine work
- Toolroom technicians inspecting tooling and fixtures
- Maintenance technicians performing dimensional checks
- Calibration and metrology personnel using fine metric measurement equipment
- Industrial buyers in Saudi Arabia sourcing genuine Mitutoyo instruments
For replacement applications, compare the existing gauge's range, graduation, back configuration and mounting arrangement before ordering.
How to Install & Use It
- Confirm that the gauge range, graduation and flat-back configuration match the intended application.
- Secure the gauge to a compatible stand, holder or fixture using the appropriate flat-back mounting arrangement.
- Position the contact point against the reference surface or workpiece and apply suitable preload.
- Set the reference position or zero using the dial bezel.
- Move the workpiece or gauge through the required measurement and observe the pointer position.
- Because this is a one-revolution dial, read the measurement directly within the specified range without counting multiple pointer revolutions.
- Remove the contact point from the workpiece after measurement and store the gauge appropriately.
Use a suitable mounting arrangement and avoid excessive force on the contact point or gauge mechanism.
Frequently Asked Questions
What is the measuring range and graduation of the Mitutoyo 2901AB-10?
The measuring range is 0.16 mm and the graduation is 0.001 mm.
Is the Mitutoyo 2901AB-10 inch or metric?
The 2901AB-10 is a metric-reading dial gauge.
What back type does the 2901AB-10 have?
It has a flat-back configuration.
Is the Mitutoyo 2901AB-10 an ISO type gauge?
Yes. The supplied product information identifies the 2901AB-10 as an ISO type dial gauge.
Is the Mitutoyo 2901AB-10 a one-revolution dial gauge?
Yes. The full 0.16 mm measuring range is covered in less than one pointer revolution.
Does the Mitutoyo 2901AB-10 have a jewelled bearing?
Yes. The supplied specifications identify the 2901AB-10 as having a jewelled bearing.
What is the Mitutoyo 2901AB-10 used for?
It can be used for comparative measurement, runout and concentricity checks, flatness and height comparison, machine setup, fixture setup and tooling inspection.
What is the difference between the Mitutoyo 2901AB-10 and 2901A-10?
The supplied information lists both models with a 0.16 mm range and 0.001 mm graduation. The 2901AB-10 has a flat back, while the 2901A-10 has a lug back. The appropriate model should be selected according to the required mounting arrangement.
Is delivery available across Saudi Arabia?
Yes. Free Saudi Arabia shipping is available. Call +966 569 289 544 for current pricing and lead time.
What information should I provide for a quotation?
Send the full model number, required quantity and delivery city. If replacing an existing gauge, include its model number and your stand, fixture or holder type where available.
Request a Quote Today
For pricing, availability or ordering assistance, contact General Tech Services LLC in Saudi Arabia.
Call +966 569 289 544 for pricing and lead time.
