Client Protection
Dedicated Support
DeFelsko ATM50T | PosiTest AT-M Manual Adhesion Tester | 50 x 50 mm Tile Kit
The DeFelsko ATM50T is the manual PosiTest AT-M set up with the 50 x 50 mm Tile Kit for cementitious tile adhesives tested to EN 12004-2. Square steel plates with threaded posts are bonded to the tile, and the single-stroke hydraulic pump applies the pull. It suits tiling contractors, adhesive manufacturers and test labs needing a simple, battery-powered tester.
- Range 0.1–2.585 MPa (13–375 psi)
- Four 50 x 50 mm steel plates with threaded post
- Pull rate indicator for manual control
- Memory for 200 pulls with PosiSoft Desktop compatibility
- Sealed IP65 enclosure
- Supplied with ResinLab EP11HT 2-part epoxy and carrying case
- Specifications
- Features
- Downloads
| Part Number | ATM50T |
| Brand | DeFelsko |
| Model | PosiTest AT-M (Manual) |
| Range | 0.1–2.585 MPa / 13–375 psi |
| Resolution | 0.01 MPa (1 psi) |
| Accuracy | ±1% full scale |
| Included Dollies | 50 x 50 mm steel plate with threaded post (qty 4) |
| Cutting Tool | None |
| Adhesive | ResinLab EP11HT 2-part epoxy |
| Memory | Up to 200 pulls |
| Standards | EN 12004-2 |
| Kit | 50 x 50 mm Tile Kit |
| Typical Application | Cementitious adhesives for tiles |
- Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
- Pull Rate Indicator to manually monitor and adjust the rate of pull
- Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
- Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
- 10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
- 10 mm: 10000 psi (70 MPa)
- 14 mm: 6000 psi (40 MPa)
- 20 mm: 3000 psi (20 MPa)
- 50 mm: 480 psi (3.3 MPa)
- 50x50 mm: 375 psi (2.585 MPa) - Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
- Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls
- Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data
- Software Updates via web keep your instrument current
Other models in this series
Click a row to open that product.
Related Products
DeFelsko CHKITISO6X1 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 1 mm / 6 teeth Blade
DeFelsko CHKITISO6X1 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 1 mm / 6 teeth Blade
DeFelsko PRBATC | PosiTest AT Calibrator Probe Only | Gage Body Required
DeFelsko PRBATC | PosiTest AT Calibrator Probe Only | Gage Body Required
DeFelsko CHKITASTM11X1 | PosiTest CH Cross Hatch Adhesion Tester Kit | ASTM D3359, 1 mm / 11 teeth Blade
DeFelsko CHKITASTM11X1 | PosiTest CH Cross Hatch Adhesion Tester Kit | ASTM D3359, 1 mm / 11 teeth Blade
DeFelsko CHKITISO6X3 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 3 mm / 6 teeth Blade
DeFelsko CHKITISO6X3 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 3 mm / 6 teeth Blade
DeFelsko CHKITISO6X2 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 2 mm / 6 teeth Blade
DeFelsko CHKITISO6X2 | PosiTest CH Cross Hatch Adhesion Tester Kit | ISO 2409, 2 mm / 6 teeth Blade
DeFelsko ATC1 | PosiTest AT Calibrator with PosiTector Standard Gage Body | 0.76–24 MPa Load Cell
DeFelsko ATC1 | PosiTest AT Calibrator with PosiTector Standard Gage Body | 0.76–24 MPa Load Cell
DeFelsko CHKITASTM6X2 | PosiTest CH Cross Hatch Adhesion Tester Kit | ASTM D3359, 2 mm / 6 teeth Blade
DeFelsko CHKITASTM6X2 | PosiTest CH Cross Hatch Adhesion Tester Kit | ASTM D3359, 2 mm / 6 teeth Blade
DeFelsko SAWKNOB50 | Hole Saw with Knob 50 mm | Isolates 50 mm Test Areas
DeFelsko SAWKNOB50 | Hole Saw with Knob 50 mm | Isolates 50 mm Test Areas