Mitutoyo 505-732 Dial Caliper, Range 0-150mm
Part No. 505-732 | Range 0–150 mm | Graduation 0.01 mm | Accuracy ±0.02 mm
Product Overview
The Mitutoyo 505-732 is a Series 505 mechanical dial caliper with a 0–150 mm measuring range, 0.01 mm graduation and ±0.02 mm accuracy. Its standard hardened stainless steel jaws support outside, inside, depth and step measurements, making it suitable for general dimensional inspection and everyday workshop measurement.
The mechanical dial provides a direct analog reading without batteries. On this model, one revolution of the pointer represents 1 mm, while each dial division represents 0.01 mm. This gives the operator a fine, easy-to-read indication when checking dimensions on machined and fabricated components.
The Series 505 design combines a smooth-sliding beam with a shock-protected dial mechanism for regular workshop use. Bezel and slider locking screws help retain the measurement when the caliper needs to be held in position or removed from the component before reading.
The 0–150 mm range provides useful coverage for general machining, fabrication, maintenance and quality-control applications. For applications requiring a larger measuring range, the Mitutoyo 505-682 provides a 0–200 mm range.
Key Benefits
-
Four measurement functions in one instrument: outside, inside, depth and step measurement.
-
0–150 mm measuring range for general-purpose dimensional inspection.
-
0.01 mm graduation with ±0.02 mm specified accuracy.
-
Mechanical dial operation requires no battery.
-
1 mm per revolution provides a fine dial reading.
-
Hardened stainless steel construction for regular workshop measurement.
-
Shock-protected dial mechanism and smooth slider movement.
-
Bezel and slider locks help retain the measured position.
-
Suitable for machining, fabrication, maintenance and inspection work.
For pricing and availability in Saudi Arabia, call +966 569 289 544.
Who This Product Is Best For
The Mitutoyo 505-732 is suitable for machinists, quality inspectors, maintenance technicians, fabrication teams and dimensional-inspection personnel who need a mechanical caliper for components up to 150 mm.
It is particularly useful where a battery-free instrument is preferred for routine measurements. The four-way measurement capability also makes it practical for workshops where the same caliper is used for outside dimensions, internal dimensions, depth and step measurements.
How to Use
-
Clean the measuring surfaces and the component before measurement.
-
Close the jaws gently and check the dial zero. Adjust the bezel if required and secure it with the bezel lock.
-
Open the jaws beyond the feature being measured.
-
Position the caliper squarely against the workpiece and close the jaws gently using the thumb roller.
-
For outside measurements, ensure the jaws contact the appropriate surfaces without tilting the caliper.
-
For inside measurements, position the inside jaws correctly within the bore or opening.
-
Use the depth or step measuring surfaces as appropriate for the feature.
-
Read the beam and dial indication according to the instrument's 0.01 mm graduation.
-
Use the slider lock when the measurement needs to be retained while the caliper is removed from the component.
-
Clean the caliper after use and store it properly.
Frequently Asked Questions
What can the Mitutoyo 505-732 measure?
The 505-732 measures outside dimensions, inside dimensions, depths and steps over its 0–150 mm range.
What is the graduation of the Mitutoyo 505-732?
The dial caliper has a 0.01 mm graduation, with one pointer revolution corresponding to 1 mm.
How accurate is the Mitutoyo 505-732?
The specified accuracy for the 0–150 mm model is ±0.02 mm.
Does the Mitutoyo 505-732 require batteries?
No. It is a mechanical dial caliper and does not require batteries for normal operation.
What type of jaws does the 505-732 have?
The 505-732 uses standard hardened stainless steel jaws for general outside and inside measurement applications.
What is the difference between a dial caliper and a digital caliper?
The 505-732 provides a mechanical analog reading without batteries. Digital calipers can provide electronic functions such as inch/mm switching and, on compatible models, data output. The appropriate choice depends on the measurement workflow and required functions.
Is the Mitutoyo 505-732 suitable for depth measurement?
Yes. The caliper incorporates a depth-measuring function in addition to outside, inside and step measurement.
How do I buy the Mitutoyo 505-732 in Saudi Arabia?
Contact General Tech Services in Dammam for current pricing and availability by calling +966 569 289 544 or emailing mathews@generaltechsaudi.com.
rabia
