Mitutoyo 505-682 | Dial Caliper | Series 505 | Graduation 0.01mm | Accuracy ±0.03mm | Range 0 to 200mm
Part No. 505-682 | Range 0–200 mm | Graduation 0.01 mm | Accuracy ±0.03 mm
Product Overview
The Mitutoyo 505-682 is a Series 505 mechanical dial caliper with a 0–200 mm measuring range, 0.01 mm graduation and ±0.03 mm specified accuracy. It measures outside dimensions, inside dimensions, depths and steps with one instrument, making it suitable for general dimensional inspection and workshop measurement.
The mechanical analog dial provides a direct reading without batteries. The Series 505 dial movement is designed for smooth slider operation and high shock protection, supporting regular use in machining, fabrication, maintenance and inspection environments.
This model has standard hardened stainless steel jaws for general-purpose measurement across a broad range of workpieces. One revolution of the dial represents 1 mm, with each graduation corresponding to 0.01 mm.
The 505-682 also incorporates bezel and slider lock screws. These allow the dial setting and jaw position to be secured when a measurement needs to be retained for inspection or recording. The 200 mm range provides additional capacity for larger components such as housings, flanges and plates while retaining fine dial resolution.
For a smaller metric range, the Mitutoyo 505-732 provides a 0–150 mm measuring range.
Key Benefits
-
0–200 mm measuring range for general dimensional inspection.
-
0.01 mm graduation with ±0.03 mm specified accuracy.
-
Standard hardened stainless steel jaws for general-purpose measurement.
-
Measures outside, inside, depth and step dimensions.
-
Mechanical analog dial operates without batteries.
-
1 mm range per revolution.
-
Shock-protected dial movement for demanding workshop environments.
-
Smooth slider operation for controlled positioning.
-
Bezel and slider lock screws help retain measurement settings.
-
Hardened stainless steel construction.
-
Supplied in a fitted plastic case.
For pricing and availability in Saudi Arabia, +966 569 289 544.
Who This Product Is Best For
The Mitutoyo 505-682 is suitable for machinists, quality inspectors, maintenance technicians, fabrication workshops and other users who need a mechanical caliper for components up to 200 mm.
Its standard hardened stainless steel jaws make it a practical general-purpose option for mixed workshop applications. The mechanical dial eliminates the need for batteries and provides a direct analog indication for routine dimensional checks.
The 200 mm capacity is useful when measuring components that exceed the range of shorter calipers, while the 0.01 mm graduation provides the fine reading needed for routine inspection work.
How to Use the Mitutoyo 505-682
-
Clean the measuring jaws and workpiece before measurement.
-
Close the jaws gently and check the dial zero. Adjust the bezel if necessary and secure it.
-
Open the jaws beyond the feature being measured.
-
Position the caliper squarely against the workpiece and close the jaws gently using the slider.
-
Read the main dimension from the beam and the fine value from the dial according to the 0.01 mm graduation.
-
Use the slider lock when the jaw position needs to be retained for reading or recording.
-
Clean the measuring surfaces after use and store the caliper in its fitted plastic case.
For critical measurements, follow your established inspection and calibration procedures.
Frequently Asked Questions
What can the Mitutoyo 505-682 measure?
The 505-682 measures outside dimensions, inside dimensions, depths and steps across a 0–200 mm range.
How accurate is the Mitutoyo 505-682?
The supplied specification lists ±0.03 mm accuracy with a 0.01 mm graduation.
Does the Mitutoyo 505-682 require batteries?
No. It is a mechanical dial caliper and does not require batteries for operation.
What type of jaws does the 505-682 have?
The 505-682 uses standard hardened stainless steel jaws for general-purpose dimensional measurement.
What is the dial range per revolution?
The supplied specification lists 1 mm per revolution, with individual dial graduations of 0.01 mm.
What is the difference between the 505-682 and 505-733?
The supplied information lists both as 0–200 mm Series 505 dial calipers with standard jaws and 1 mm per revolution. Because order-number status can vary between catalogue generations, confirm the exact order number and current availability with General Tech Services before ordering.
What is the difference between the 505-682 and 505-731?
The supplied information identifies the 505-682 as a 0–200 mm model with standard jaws and 1 mm per revolution, while the 505-731 is listed with standard jaws and 2 mm per revolution. Confirm the applicable catalogue and stock configuration when selecting between these order numbers.
How do I buy the Mitutoyo 505-682 in Saudi Arabia?
Contact General Tech Services in Dammam at +966 569 289 544 or mathews@generaltechsaudi.com for pricing, availability and delivery information.
