Mitutoyo 323-352-30 | Digital Disc Micrometer IP65 | 2–3 in, 20 mm Disc
The Mitutoyo 323-352-30 is a Series 323 digital disk micrometer with 20 mm measuring disks, IP65 protection and a 2-3" measuring range. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.
Part No.: 323-352-30
Contact: +966 531 321586
Measuring gear teeth, thin flanges and soft materials with a standard micrometer is awkward because flat anvils cannot reach between teeth. The Mitutoyo 323-352-30 uses thin 20 mm measuring disks to reach into narrow spaces across a 2-3" range.
A ratchet stop applies constant measuring force for repeatable readings. IP65 protection allows use near coolant and dust. The display reads to 0.00005" / 0.001 mm with inch/mm switching. It is genuine Mitutoyo, supplied through an authorised distributor.
Typical uses include gear manufacturers checking root tangent length, measuring thin flanges, ribs and narrow recesses, and measuring soft materials such as rubber, felt and card. Disk micrometers are designed to measure the root tangent length of spur and helical gears and are also well suited to soft materials such as felt, rubber, cardboard and fabric. Digimatic data output lets readings go straight to SPC software.
For the best accuracy, let the micrometer and part reach the same temperature before measuring, and keep the thin disk edges clean and free from damage.
Ranges that do not start at zero are set using a standard bar. Confirm your gear module or part size with our team so we recommend the correct range. Our team can also arrange calibration.
Comparing options? See the Mitutoyo 323-353-30 (3-4") before you order.
Key Benefits
-
20 mm disks reach into narrow recesses
-
Measures gear root tangent length
-
Ratchet stop for repeatable measuring force
-
IP65 protection for shop-floor use
-
2-3" measuring range
-
Genuine Mitutoyo from an authorised distributor in Saudi Arabia
Contact: +966 531 321586
Who This Product Is Best For
-
Gear manufacturers checking root tangent length
-
Measuring thin flanges, ribs and narrow recesses
-
Measuring soft materials such as rubber, felt and card
How to Specify & Install It
-
Clean the disk measuring faces.
-
Set the origin using the disks or a suitable standard bar.
-
Bring the disks onto the part with constant measuring force.
-
Read the measurement or output the value through the data connection.
Frequently Asked Questions
What is a disk micrometer used for?
It is mainly used for measuring the root tangent length of spur and helical gears, as well as thin sections and soft materials.
What size are the measuring disks?
The measuring disks are 20 mm in diameter.
What is the difference between Series 323 and Series 369?
Series 323 has a rotating spindle, while Series 369 has a non-rotating spindle that helps eliminate torque on the workpiece.
Should I choose the 323-352-30 or the 323-353-30?
The 323-353-30 offers a 3-4" measuring range, while the 323-352-30 covers 2-3". Match the measuring range, graduation and accessories to your application. Our team can help you compare the requirements.
How should I care for the instrument?
Wipe the contact surfaces clean after use, store the micrometer in its case away from heat, humidity and coolant, and avoid knocks to the measuring disks or spindle. Regular calibration helps maintain measurement accuracy.
Can the instrument be calibrated?
General Tech Saudi provides calibration services for dimensional instruments. Ask the team about calibration when you order.
Can you supply other Mitutoyo instruments in the same order?
Yes. General Tech supplies a wide range of Mitutoyo micrometers, indicators, gauges and accessories. Share your requirements and the team can quote them together.
Is genuine Mitutoyo available in Saudi Arabia?
Yes. General Tech is an authorised Mitutoyo distributor in Saudi Arabia. Contact the team for current pricing, availability and lead time.
Contact: +966 531 321586
