Mitutoyo 293-243-30 Digital Micrometer IP65 75-100mm, w/o Output

Part No.: Mitutoyo 293-243-30
Contact: +966 531 321586 | Call for Pricing and Stock Availability | Saudi Arabia

The Mitutoyo 293-243-30 is a Series 293 IP65 coolant-proof digital micrometer with a 75–100 mm measuring range and 0.001 mm resolution. This no-output model is designed for precision measurement in machine-shop and inspection environments where coolant and cutting oil are present. Genuine Mitutoyo stock is available from General Tech, an authorised Mitutoyo distributor in Saudi Arabia.

On a machine-shop floor, measuring instruments can be exposed to coolant, cutting oil and water spray. The Mitutoyo 293-243-30 is designed for these conditions with an IP65 protection rating. Its dust-tight construction and protection against water jets from any direction make it suitable for demanding machining and inspection environments.

The digital display provides a 0.001 mm resolution, allowing operators to read the measurement directly without interpreting traditional mechanical graduations. As a no-output model, the micrometer is suitable for applications where measurements are recorded manually rather than transferred to SPC software.

Consistent measuring force is important for repeatable micrometer measurements. Check with our team for details of the constant-force device fitted to this model. Before ordering, confirm the required measuring range, display units, data-output requirements and preferred thimble configuration.

For ranges above 25 mm or 1 inch, establish the micrometer origin against an appropriate reference standard at the minimum range length before measurement. General Tech can assist with model selection and calibration requirements.

Comparing output options? See the Mitutoyo 293-233-30 with data output.

Key Benefits

• IP65 coolant-proof protection — Dust-tight and protected against water jets from any direction

• 75–100 mm measuring range — Suitable for medium and large turned and ground components

• 0.001 mm resolution — Clear digital measurement for precision inspection

• Series 293 construction — Designed for demanding machine-shop environments

• No-output configuration — Suitable for applications where readings are recorded manually

• Digital display — Helps reduce errors associated with reading mechanical graduations

• Genuine Mitutoyo — Supplied through an authorised Mitutoyo distributor in Saudi Arabia

Part No.: Mitutoyo 293-243-30
Contact: +966 531 321586 | Call for Pricing and Stock Availability | Saudi Arabia

Who This Product Is Best For

• Machine shops measuring turned and ground components near coolant

• Workshops that record dimensional measurements manually

• QC inspectors checking shafts, housings and machined components

• Inspection departments standardising on genuine Mitutoyo instruments

• Maintenance and production teams working around machining fluids

• Buyers who do not require Digimatic data output or SPC connectivity

How to Use

1. Clean the anvil and spindle measuring faces with a lint-free cloth.

2. Establish the origin using an appropriate reference standard at the minimum range length.

3. Position the anvil and spindle correctly on the workpiece.

4. Bring the spindle onto the part using the appropriate constant-force mechanism. Do not force the thimble.

5. Read the measurement on the digital display.

6. Record the measurement manually as required.

7. Clean the micrometer after use and store it appropriately.

Frequently Asked Questions

What is the measuring range of the Mitutoyo 293-243-30?
The measuring range is 75–100 mm with a 0.001 mm resolution.

What does IP65 mean for the Mitutoyo 293-243-30?
IP65 indicates that the micrometer is dust-tight and protected against water jets from any direction. This makes it suitable for measurement environments where coolant and cutting oil are present.

Does the Mitutoyo 293-243-30 have data output?
No. The 293-243-30 is a no-output model. If you need to transfer measurements to SPC software or another data-processing system, choose a compatible model with Digimatic output.

What is the advantage of the no-output configuration?
It is suitable for applications where measurements are read from the digital display and recorded manually, without requiring a data connection to an SPC system.

Should I choose the 293-243-30 or the 293-233-30?
The 293-243-30 is a no-output model, while the 293-233-30 provides data output. Select the configuration according to whether your inspection process requires digital data transfer.

Is the Mitutoyo 293-243-30 suitable for use near machine tools?
Its IP65 protection is designed for environments where dust, coolant and water spray may be present, making it suitable for machine-shop measurement applications within its specified operating conditions.

Can the Mitutoyo 293-243-30 be calibrated?
Yes. General Tech Saudi provides calibration services for dimensional measuring instruments. Contact the team to discuss calibration requirements when ordering.

Can you supply other Mitutoyo instruments with this micrometer?
Yes. General Tech supplies a wide range of Mitutoyo measuring instruments, including micrometers, calipers, indicators and other dimensional measurement equipment.

Is genuine Mitutoyo stock available in Saudi Arabia?
General Tech is an authorised Mitutoyo distributor in Saudi Arabia. Contact the team for current pricing, stock availability and lead time.

How do I order the Mitutoyo 293-243-30?
Contact General Tech with the part number, required quantity and any specific configuration requirements. Pricing and availability can be confirmed by phone.

Part No.: Mitutoyo 293-243-30
Contact: +966 531 321586 | Call for Pricing and Stock Availability | Saudi Arabia