Skip to product information
Mitutoyo 128-106 | Depth Micrometer | Range 0-1" |  4" Base - generaltechuae

Mitutoyo 128-106 | Depth Micrometer | 0-1", 4" base

Part Number : 128-106

Part No. 128-106 | Range 0–1" | Base Size 4"

Product Overview

The Mitutoyo 128-106 is a Series 128 analog depth micrometer designed for measuring the depth of steps, slots, recesses, shoulders and other recessed features. This model provides a 0–1" measuring range and is listed with a 4" base, providing a wider reference surface for positioning the instrument across larger parts and openings.

The larger 4" base can provide a broad seating area when measuring depth across wider features. This makes the 128-106 suitable for workshops and inspection environments where a wider reference surface is useful. The inch-range design also suits applications where measurements and drawings are specified in inches.

To measure a feature, place the base securely on the reference surface and extend the measuring rod until it contacts the bottom of the feature. The micrometer scale provides the depth reading, allowing results to be recorded and compared during inspection.

For a related Series 128 model, see the Mitutoyo 128-105 Depth Micrometer, which also covers 0–1" and is listed with a 0.001" graduation and 200 g weight.

Key Benefits

  • 0–1" measuring range

  • 4" base for a wide reference surface

  • Suitable for larger parts and wider openings

  • Inch-based depth measurement

  • Mechanical design with no battery required

  • Suitable for routine depth inspection

  • Designed for measuring steps, slots, recesses and shoulders

Who This Product Is Best For

The Mitutoyo 128-106 is suitable for:

  • Machine shops and toolrooms checking step and slot depths

  • Quality control teams performing repeatable manual depth measurements

  • Metrology and incoming inspection departments

  • Maintenance teams checking depth on worn or repaired components

  • Workshops working from inch-based drawings

  • Applications where a wider 4" reference base is useful

How to Use

  1. Clean the micrometer base, measuring rod and workpiece surface before measurement.

  2. Place the 4" base flat and securely across the reference surface.

  3. Position the measuring rod over the feature being measured.

  4. Turn the thimble gradually until the measuring rod contacts the bottom of the feature.

  5. Read the measurement from the sleeve and thimble scales.

  6. Record the result and repeat the measurement when verification is required.

Keep the base fully seated during measurement and avoid rocking or tilting the instrument.

Frequently Asked Questions

What does the Mitutoyo 128-106 measure?

The 128-106 measures the depth of features such as slots, steps, recesses and shoulders. It has a 0–1" range and a 4" base.

What is the range of the 128-106?

The measuring range is 0–1".

What size base does the 128-106 have?

The 128-106 is listed with a 4" base, providing a wider reference surface for positioning the micrometer across a feature.

What is the difference between the 128-106 and 128-105?

Both models cover a 0–1" range. The 128-106 is listed with a 4" base, while the 128-105 is listed with a 0.001" graduation and 200 g weight. Compare the published specifications with your application and measurement requirements before ordering.

Is the 128-106 part of the Mitutoyo Series 128 range?

Yes. The 128-106 is identified as part of Mitutoyo's 128 range of depth micrometers.

What is a depth micrometer used for?

A depth micrometer measures the depth of slots, steps, recesses, shoulders and other recessed features. Its reference base and fine screw adjustment provide controlled manual depth measurement.

How much does the Mitutoyo 128-106 cost?

Pricing is available on request. Call +966 569 289 544 or use the quote form to check current availability and pricing.

 

Availability: in stock
Free Saudi Arabia shipping available
Ask an Expert