Dwyer Instruments GFC-2111 | Gas mass flow controller | Range 0-15 LPM. Specified flow Range is for an equivalent flow of nitrogen at 70°F (21°C) @ 760 mm Hg | 1/4" compression fitting - generaltechuae

Client Protection

Dedicated Support

Genuine Products

Client Protection

Dedicated Support

Genuine Products

Dwyer GFC-2111 | Gas Mass Flow Controller | 0-15 L/min N2, 1/4" compression

Name: Dwyer GFC-2111 | Gas Mass Flow Controller | 0-15 L/min N2, 1/4" compression
Brand: Dwyer
SKU: GFC-2111
Availability: OutOfStock

Part Number : GFC-2111

The Dwyer GFC-2111 is a gas mass flow controller spanning 0-15 L/min (equivalent nitrogen at 21°C, 760 mm Hg) and fitted with a 1/4" compression fitting. The GFC-2111 pairs a restrictor flow element with a straight-tube sensor and gives linear 0-5 VDC and 4-20 mA outputs.

Operates at 0 to 50°C from ±12 VDC (GFC-2111)
GFC-2111 accuracy ±1% FS (5 to 25°C, 5 to 60 psia), repeatability ±0.25% FS
Response of the GFC-2111: 2 s to within ±2% of actual flow, shown on a tiltable 3-1/2 digit LCD
GFC-2111 pressure limit: 1000 psig (68.9 bar)
Wetted parts of the GFC-2111: 316 SS with fluoroelastomer O-rings

Availability: in stock

Free Saudi Arabia shipping available

Specifications
Features
Downloads

Part Number	GFC-2111
Brand	Dwyer
Flow Range	0-15 L/min
Reference Conditions	Nitrogen equivalent at 70°F (21°C), 760 mm Hg
Process Connection	1/4" compression fitting
Accuracy	±1% FS including linearity
Repeatability	±0.25% FS
Response Time	2 s to within ±2% of actual flow
Output	Linear 0-5 VDC and 4-20 mA
Power Supply	±12 VDC
Display	3-1/2 digit LCD, 90° tiltable
Wetted Materials	316 SS with fluoroelastomer O-rings
Max Operating Pressure	1000 psig (68.9 bar)
Operating Temperature	32 to 122°F (0 to 50°C)

Delivers excellent repeatability and precision.
Temperature and pressure changes almost never have an impact on flow rates.
Uses PID electronics and an electromagnetic valve to compare measured sensor signal set to flow rates in order to maintain continuous control.
Local potentiometers or an analog signal with a voltage between 0 and 5 VDC or 4 and 20 mA can be used to remotely alter set points.
Measured gas flow is shown on a 3-1/2 digit, 90° tiltable LCD readout in engineering units.
When totalization is needed, it can be utilized in conjunction with the Series GFT2 Flow Totalizer.
Includes a traceable NIST certificate.