Barton 7310 RF meter, meter Size :10 inch,End Connection Size :2 inch,Flow Rate :800-8000 US GPM

Genuine Barton 7310 turbine flow meter from General Tech Services LLC, Saudi Arabia, with free Saudi Arabia shipping available.

Part No. 7310

Product Overview

The Barton 7310 is a 10-inch liquid turbine flow meter from the Cameron BARTON Series 7000 range, designed for precise liquid flow measurement in hydrocarbon applications. It covers a flow range of 800–8,000 US GPM, providing approximately a 10:1 flow range.

Liquid passes through a diffuser and onto a multi-blade turbine rotor. The rotor speed is proportional to the flow rate, while a pickup senses each blade tip and produces a sine-wave signal corresponding to flow. This output is suitable for connection to compatible digital readouts, totalizers, preamplifiers and flow computers.

The Barton 7310 has a listed 10-inch meter size and a 2-inch end connection size. Rated linearity is ±0.25% of reading over the stated flow range, tightening to ±0.15% over limited ranges, with ±0.02% repeatability.

The symmetrical, bidirectional design supports reverse-flow applications without reducing the stated accuracy or capacity. The meter is listed for hydrocarbon measurement and can be used in applications such as crude and refined product lines, loading and transfer skids, chemical injection and allocation metering.

Matching accessories, including meter runs, preamplifiers, totalizers, connectors and cables, are available. Before ordering, confirm that normal and maximum flow requirements are within the meter's range. Also check the line size, end-connection style, fluid, pressure rating and electronics that will be connected to the pickup.

General Tech Services supplies genuine Barton instruments to industrial customers across Saudi Arabia from its Dammam office. Share the part number, quantity and delivery city, and the team can confirm compatibility, availability and pricing.

Key Benefits

• Measures 800–8,000 US GPM in a 10-inch meter
• Approximately 10:1 flow range
• ±0.25% of reading linearity over the stated flow range
• ±0.15% linearity over limited ranges
• ±0.02% repeatability
• Symmetrical design supports reverse-flow applications
• Sine-wave pickup output for compatible measurement electronics
• Suitable for digital readouts, totalizers and flow computers
• Cameron BARTON Series 7000 turbine-meter design
• Suitable for hydrocarbon measurement applications
• Free Saudi Arabia shipping available

Who This Product Is Best For

The Barton 7310 is suited to:

• Oil and gas metering and allocation teams
• Terminal, loading and product-transfer operations
• Hydrocarbon measurement applications
• Process and instrumentation engineers
• Maintenance teams replacing a compatible Barton turbine meter
• Flow-meter integration projects using totalizers or flow computers
• Buyers in Saudi Arabia requiring genuine Barton flow measurement equipment

How to Install & Use It

1. Confirm that the required flow range, line size and fluid are suitable for the Barton 7310.
2. Verify the required end-connection configuration and pressure rating before installation.
3. Install the meter with the recommended upstream and downstream straight-pipe arrangement.
4. Fit a suitable strainer where debris in the liquid could affect the turbine or meter operation.
5. Connect the pickup to the compatible preamplifier, totalizer, digital readout or flow computer.
6. Enter the applicable meter K-factor into the connected electronics.
7. Fill the line gradually and verify the flow indication at normal operating conditions.
8. Check the output and recorded flow against the commissioning requirements for the installation.

Frequently Asked Questions

What flow range does the Barton 7310 turbine flow meter cover?

The Barton 7310 covers 800–8,000 US GPM in a 10-inch meter size.

How accurate is the Barton 7310?

Linearity is rated at ±0.25% of reading over the stated flow range, with ±0.15% over limited ranges. Repeatability is ±0.02% of reading.

Can the Barton 7310 measure reverse flow?

Yes. The symmetrical Series 7000 design supports reverse-flow applications without reducing the stated accuracy or capacity.

What output does the Barton 7310 provide?

The pickup produces a sine-wave signal proportional to flow. This output can be connected to compatible preamplifiers, totalizers, digital readouts or flow computers.

What is the Barton 7310 used for?

The listed application is hydrocarbon measurement. Typical uses include crude and refined product lines, product transfer, loading, chemical injection and allocation metering.

What is the listed end connection size?

The supplied product information lists a 2-inch end connection size for the Barton 7310. The Series 7000 range references flanged and threaded connection configurations, so the exact arrangement should be confirmed before ordering.

What is the difference between the Barton 7310 and 7312?

The Barton 7310 is a 10-inch meter covering 800–8,000 US GPM, while the Barton 7312 is a 12-inch meter covering 1,250–12,500 US GPM. Both are listed with a 2-inch end connection size. Selection should be based on the required flow range, meter size and installation requirements.

What information should I provide when requesting a quote?

Provide the model number, quantity and delivery city, along with the fluid, required flow range, line size, pressure rating and connection requirements. This helps confirm the appropriate configuration.

How much does the Barton 7310 cost?

Pricing is quote-based. Call +966 569 289 544 for current pricing and lead-time information.

Request a Quote Today

For Barton 7310 pricing, availability or ordering support, contact General Tech Services LLC.

Call +966 569 289 544 | www.generaltechshop.sa