ASCO E290D3110SA0000, Angle Seat type Pneumatic Actuated Valve, G 3/8in to G 3/8in, 10 bar
Part No. E290D3110SA0000
The ASCO E290D3110SA0000 is a 3/8" (DN10) stainless steel Series 290 angle seat valve with G 3/8 threaded ports, rated to 10 bar. It is a normally closed valve with fluid entry above the disc, a configuration recommended by ASCO for rapid-cycling steam applications. Genuine ASCO valve, supplied in the UAE by General Tech Services LLC. Request a quote in under a minute - call +971 6 543 6933.
The ASCO E290D3110SA0000 is designed for demanding steam, hot water and air isolation applications where rapid cycling can contribute to water hammer, seat wear and packing issues. Its angled seat provides a high-flow path with low pressure loss, while the stainless steel body and PTFE disc seal support operation in demanding industrial environments.
The valve uses a 32 mm plastic piston actuator with a G 1/8 pilot port. The actuator can rotate through 360°, making pilot tubing easier to position on compact equipment and skids. The valve is also serviceable in-line, allowing maintenance without removing the body from the pipework.
Series 290 valves are designed for air, inert gas and steam, with fluid temperatures from -10 °C to +184 °C. Always confirm the medium, temperature and pressure against the applicable product documentation before installation.
Ready to order the ASCO E290D3110SA0000? Speak to our team. Call +971 6 543 6933
Key Benefits
-
3/8" (DN10) G 3/8 threaded ports for standard BSP pipework
-
Normally closed configuration with fluid entry above the disc
-
Entry-above-disc design recommended by ASCO for rapid-cycling steam
-
Rated to 10 bar with an angled seat for high flow and low pressure drop
-
Stainless steel body with PTFE disc seal
-
32 mm plastic piston actuator with G 1/8 pilot port
-
360° actuator rotation for convenient pilot tubing installation
-
Serviceable in-line without removing the valve body from the pipework
Who This Product Is Best For
-
Steam lines with rapid cycling in laundries, sterilisers and process heating
-
Hot water and air isolation on 3/8" pipework up to 10 bar
-
Industrial plants looking to reduce water hammer and seat wear
-
Equipment and skid builders requiring compact pneumatic process valves
How to Install & Use It
-
Confirm the nameplate matches E290D3110SA0000, 3/8", 10 bar and the NC entry-above-disc configuration for the intended application.
-
Install a suitable strainer upstream and fit the valve in the required orientation while respecting the flow arrow on the valve body.
-
Connect filtered pilot air to the G 1/8 pilot port through a suitable 3/2 solenoid pilot valve.
-
Cycle the valve several times, check all connections for leaks and verify the position indicator before commissioning.
-
The valve can be serviced in-line without removing the body from the pipework.
Frequently Asked Questions
What is the ASCO E290D3110SA0000?
It is a 3/8" (DN10) stainless steel Series 290 angle seat valve with G 3/8 threaded ports. It is normally closed, uses fluid entry above the disc and is rated to 10 bar.
What media can it handle?
Series 290 valves are designed for air, inert gas and steam, with fluid temperatures from -10 °C to +184 °C. Always confirm material compatibility with the specific fluid and operating conditions.
How is the valve operated?
It is pressure operated. Filtered air or water pilot pressure moves the piston, typically through a suitable 3/2 solenoid pilot valve. The maximum pilot pressure stated for this configuration is 10 bar.
What happens if pilot air is lost?
The normally closed configuration uses spring force to close the valve, shutting off the line when pilot pressure is removed.
How do I choose the E290D3110SA0000 or another Series 290 valve?
Choose the valve based on line size, connection type, pressure rating, medium and operating conditions. Send your process data and valve part number to General Tech Services LLC for compatibility confirmation.
Is this a genuine ASCO valve?
General Tech Services supplies original ASCO valves in the UAE with technical support.
How do I get a price and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
