ASCO E290D0350DA0000, Angle Seat type Pneumatic Actuated Valve, ISO 3/4in

ASCO E290D0350DA0000 Angle Seat Valve, G 3/4" (DN20), Normally Closed, Bronze Body, 63 mm Actuator ASCO E290D0350DA0000 Angle Seat Valve 3/4" Bronze | KSA Product Summary The ASCO E290D0350DA0000 angle seat valve is a 3/4" normally closed valve with a bronze body and 63 mm pneumatic actuator. It handles up to 16 bar for air and liquids and 10 bar for steam, with a Kv of 10.7. It is a practical choice for clean, non-aggressive media. For a quote from General Tech, call +966 569 289 544. Product Description Not every line needs stainless steel. Compressed air, cooling water and utility steam are often non-aggressive, and a bronze body provides a practical solution for these applications. The ASCO E290D0350DA0000 angle seat valve provides reliable on/off control for these utility services. Flow enters under the disc, and the valve handles up to 16 bar differential pressure for air and liquids and up to 10 bar for steam, with a Kv of 10.7 (Cv 12.4). The 63 mm actuator opens the valve from 4.5 bar pilot pressure and includes a visual position indicator. PTFE seals support fluid temperatures up to 184 °C. The valve weighs approximately 1.1 kg, can be installed in any position and allows 360° actuator rotation for convenient pilot-port access. For comparison, the E290D0330SA0000 uses a 316L stainless steel body, while the E290D1330DA0000 is a bronze normally open version. Key Benefits Up to 16 bar differential pressure for air and liquids. Bronze body suitable for clean, non-aggressive utility media. Kv 10.7 (Cv 12.4) for efficient flow. 63 mm actuator with visual position indicator. Steam service up to 10 bar and 184 °C. 360° actuator rotation for convenient installation and pilot-port access. SIL 2 capable according to the stated Series 290 specifications. For pricing and availability in Saudi Arabia, call +966 569 289 544. Who This Product Is Best For The ASCO E290D0350DA0000 is suitable for compressed air networks, cooling water, HVAC circuits and utility steam systems where the media are clean and non-aggressive. It can also be used in oil and gas utility skids, textile and laundry steam lines, packaging machinery and other industrial applications requiring pneumatic on/off control. How to Use / How It Works Install the valve: Fit the valve in the required orientation, match the flow direction marked on the body and use thread sealant suitable for the application. Connect the pilot air: Connect filtered air or water to the G1/8 pilot port through a suitable 3/2 solenoid pilot valve. Rotate the actuator if necessary to access the pilot port. Set pilot pressure: Supply pilot pressure between 4.5 and 10 bar. Use the visual position indicator to confirm valve operation. Cycle and test: Operate the pilot valve several times and check that the valve opens and closes correctly without leakage before putting the system into normal service. Frequently Asked Questions What is the body material of the E290D0350DA0000? The valve has a bronze body and is intended for clean, non-aggressive media. Can the E290D0350DA0000 handle steam? Yes. It is rated for steam up to 10 bar and 184 °C. What is the maximum differential pressure? The maximum differential pressure is 16 bar for air and liquids and 10 bar for steam. What pilot pressure does it require? The minimum pilot pressure is 4.5 bar and the maximum pilot pressure is 10 bar. Filtered air or water can be used as the pilot medium. Is the valve normally closed? Yes. The E290D0350DA0000 is a 2/2 normally closed pneumatic angle seat valve with flow entering under the disc. Where can I buy the ASCO E290D0350DA0000 in Saudi Arabia? Contact General Tech for pricing and availability in Saudi Arabia at +966 569 289 544 or mathews@generaltechsaudi.com.