ASCO E290D02P0SA0000 Angle Seat Valve – G 1/2" DN15 NC, 316L Stainless, 10 bar
ASCO E290D02P0SA0000 Angle Seat Valve 1/2" 10 bar | KSA
PRODUCT SUMMARY
The ASCO E290D02P0SA0000 angle seat valve is a compact 1/2" (DN15) normally closed valve for air, water, light oil and steam service. Its AISI 316L stainless steel body supports up to 10 bar differential pressure, with fluid entering under the disc. The valve opens when pilot air is applied to the piston actuator.
For pricing and availability in Saudi Arabia, contact General Tech at +966 569 289 544.
PRODUCT DESCRIPTION
The ASCO E290D02P0SA0000 is a Series 290 pneumatic angle seat valve designed for small process and utility lines where dependable isolation is required.
The valve operates as a 2/2 normally closed valve. A spring holds the valve shut, while pilot air lifts the disc when the control system energises a suitable 3/2 solenoid pilot valve. Fluid enters under the disc, providing a flow path suited to the specified air, water, light-oil and steam applications.
The wetted construction includes an AISI 316L stainless steel body, PTFE disc seal, PTFE stuffing box, FPM wiper seal and AISI 431 stainless steel stem. The valve supports fluid temperatures from -10°C to +184°C and media viscosity up to 800 cSt for the specified compatible media.
The valve is rated for up to 10 bar differential pressure, while the maximum allowable body pressure is 16 bar. It can handle steam up to 10 bar and 184°C according to the supplied source data.
The actuator variant is identified by code P. The source states that the actuator size and material are not specified in ASCO's public datasheets, so General Tech should confirm the exact actuator configuration before ordering.
For comparison, the E290D0230SA0000 uses a 50 mm plastic actuator on the same 1/2" stainless body, while the E290D32T0SA0000 uses entry above the disc and is positioned in the source for steam and fast-cycling applications.
KEY BENEFITS
Compact G 1/2" (DN15) configuration
AISI 316L stainless steel body
Normally closed operation for fail-closed isolation
Up to 10 bar differential pressure
Steam service up to 10 bar and 184°C
PTFE disc seal and stuffing box
FPM wiper seal with AISI 431 stainless steel stem
Suitable for air, inert gases, water, steam and light oils where compatible
Any mounting position
360° actuator rotation for pilot-port access
IEC 61508 SIL 2 listed in the supplied source data
For pricing and availability, contact General Tech at +966 569 289 544.
WHO THIS PRODUCT IS BEST FOR
The ASCO E290D02P0SA0000 is suitable for 1/2" lines in pharmaceutical utilities, food and beverage cleaning systems, textile and laundry steam applications, and water treatment dosing skids across Saudi Arabia and the GCC.
It can also be used for rinse water, low-flow steam to presses and ironers, instrument-air isolation and sampling lines where a normally closed valve is required.
HOW TO USE / HOW IT WORKS
1. Position the valve
Install the valve in any orientation and align the flow arrow on the body with the process flow direction.
2. Connect the pilot supply
Connect a suitable 3/2 solenoid pilot valve to the pilot port using filtered air or water. Confirm the port and actuator configuration with General Tech for the P variant.
3. Adjust the pilot supply
Keep the pilot pressure within the specified maximum of 10 bar and provide sufficient pressure for full valve opening.
4. Test the cycle
Open and close the valve several times under line pressure. Check for full operation and inspect all connections for leakage.
FREQUENTLY ASKED QUESTIONS
Is the E290D02P0SA0000 normally open or normally closed?
It is normally closed. The valve remains shut without pilot air and opens when pilot air is applied.
What is the maximum differential pressure?
The supplied source specifies up to 10 bar differential pressure. The maximum allowable body pressure is 16 bar.
Can the ASCO E290D02P0SA0000 handle steam?
Yes. The supplied source specifies steam service up to 10 bar and 184°C.
What actuator does it use?
The actuator is identified by variant code P. The source does not specify its exact size or material, so General Tech should confirm the actuator configuration before ordering.
What pilot medium can be used?
Filtered air or water can be used as the pilot medium, with a maximum pilot pressure of 10 bar.
Where can I buy the ASCO E290D02P0SA0000 in Saudi Arabia?
Contact General Tech at +966 569 289 544 or mathews@generaltechsaudi.com for pricing and availability.
