Norbar EvoTorque ET2-92-2700-230 Electronic Torque Multiplier 270-2700NM, 1" Square Drive
The Norbar EvoTorque 2 ET2-92-2700-230 is a mains-powered electronic torque tool delivering 270–2,700 N·m through a 1" square drive with ±3% accuracy. It features on-board data storage, USB and Bluetooth 4.0 data transfer, and multiple tightening modes. Supplied by General Tech Services LLC, UAE.
For pricing and availability, call +971 6 5436933.
Part No. 180229.B08
Torque multipliers and long wrench extensions can require additional manpower and working space. The Norbar EvoTorque 2 ET2-92-2700-230 is a pistol-style electronic torque tool designed for single-operator tightening, using a reaction point to support controlled bolting.
This model covers 270–2,700 N·m through a 1" square drive, making it suitable for crane slew rings, large pipe flanges and heavy-duty mechanical joints. It operates on 230 V mains, commonly available in UAE workshops, plant rooms and fabrication yards.
The EvoTorque 2 offers Torque, Torque & Angle and Torque Audit modes. Final torque or torque-and-angle results are displayed and stored with time and date stamps, with capacity for up to 3,000 readings. Results can be transferred to a PC through USB or Bluetooth 4.0, while Norbar's EvoLog software supports tool setup and data management. The Turn Angle option helps check whether a bolt has already been tightened.
The supplied product information notes that Norbar's 2,700 N·m EvoTorque 2 data is listed under the ET2-80 gearbox. Confirm the exact part number and configuration with the supplier when requesting a quote.
For a comparable setup using a different supply voltage, ask about the ET2-92-2700-110 version.
Key Benefits
-
±3% accuracy and repeatability on joints of 30° and above
-
Intelligent joint sensing for consistent results on hard and soft joints
-
Torque, Torque & Angle and Torque Audit operating modes
-
On-board storage for 3,000 time- and date-stamped readings
-
USB and Bluetooth 4.0 data transfer with EvoLog PC software
-
Traceable torque and angle calibration certificate supplied as standard
For pricing and availability, call +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams working on crane slew rings
-
EPC contractors and QA managers who require stored, traceable torque records
-
Workshops and plant rooms using 230 V mains
-
Teams performing repetitive high-torque bolting with a single operator
How to Use It
-
Fit the reaction arm and an appropriately rated impact socket of the correct size.
-
Power on the tool, select the required mode and enter the target torque and angle, if applicable.
-
Position the reaction arm against a solid adjacent reaction point, then press the trigger.
-
Allow the tool to stop at the target value. The result is stored for later export through EvoLog.
Frequently Asked Questions
1. What torque range does the ET2-92-2700-230 cover?
The supplied listing specifies 270–2,700 N·m through a 1" square drive. Norbar calibrates the EvoTorque 2 from 20% to 100% of maximum capacity, so check your lowest required bolt torque against the calibration certificate.
2. How accurate is the EvoTorque 2?
It provides ±3% accuracy and repeatability of the set value within its calibrated range, on joints of 30° and above.
3. Can it store and export torque data?
Yes. It stores up to 3,000 time- and date-stamped readings and transfers them to a PC through USB or Bluetooth 4.0 for use with EvoLog software.
4. Which voltage does this version require?
This listing specifies 230 V. Confirm that the selected tool matches your site's power supply before ordering.
5. How do I choose between the 230 V and 110 V versions?
Choose the version compatible with your available power supply. The ET2-92-2700-110 is the alternative to discuss if you require a 110 V setup. Confirm the exact model and part number with the supplier.
6. How can I get UAE pricing and lead time?
Contact General Tech Services LLC for current pricing, availability, delivery information and confirmation of the exact part number.
Request a quote for the Norbar EvoTorque 2, Part No. 180229.B08. Call +971 6 5436933.
