Norbar EvoTorque 2 ET2-92-4000-230 with Pelicase Electronic Torque Multiplier 400-4000NM
The Norbar EvoTorque 2 ET2-92-4000-230 is a mains-powered electronic torque tool delivering 400–4,000 N·m through a 1" square drive with ±3% accuracy, on-board data storage and USB/Bluetooth transfer. It is supplied in a protective Pelicase and available from General Tech Services LLC, UAE.
For pricing and availability, call +971 6 5436933.
Part Number: 180228.B08.PEL
Torque multipliers and long wrench extensions take two people and a lot of space. The Norbar EvoTorque 2 ET2-92-4000-230 is a single-operator, pistol-style electronic torque tool that handles the work with one reaction point.
This model covers 400–4,000 N·m on a 1" square drive, making it suitable for wind turbine towers, large flanges and heavy structural bolting. It runs on 230 V mains, the standard supply in UAE workshops, plant rooms and fabrication yards.
EvoTorque 2 offers Torque, Torque & Angle and Torque Audit modes. Final torque or torque-and-angle results are shown on the display and stored on the tool with time and date stamps, with capacity for up to 3,000 readings. Results can be transferred to a PC by USB or Bluetooth 4.0, while Norbar's EvoLog software supports tool setup and data management. A Turn Angle option helps check whether a bolt has already been tightened.
The Pelicase is a rugged, sealed carry case that protects the tool, reaction arm and accessories during transport between sites. This is particularly useful for a precision instrument supplied with traceable calibration documentation.
If your application requires a different package, compare it with the ET2-92-4000-230 supplied without a Pelicase before ordering.
Key Benefits
-
±3% accuracy: Accuracy and repeatability on joints of 30° and above, within the calibrated range.
-
Intelligent joint sensing: Supports consistent results on hard and soft joints.
-
Protective Pelicase: Helps protect the tool and accessories during storage and transport.
-
Multiple operating modes: Torque, Torque & Angle and Torque Audit.
-
On-board data storage: Stores up to 3,000 time- and date-stamped readings.
-
Flexible data transfer: USB and Bluetooth 4.0 connectivity with EvoLog PC software.
-
Traceable calibration: Torque and angle calibration certificate supplied as standard.
For pricing and availability, call +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams bolting wind turbine towers.
-
EPC contractors and QA managers who require stored, traceable torque records.
-
Workshops and plant rooms operating on 230 V mains.
-
Industrial teams performing repetitive, high-torque bolting with a single operator.
How to Use It
-
Fit the appropriate reaction arm and an impact-rated socket of the correct size.
-
Power on the tool, select the required operating mode and enter the target torque, including the angle setting if required.
-
Position the reaction arm against a solid, suitable reaction point before operating the tool.
-
Operate the tool according to the manufacturer's instructions. It stops at the target setting and stores the result for later transfer.
-
Export the recorded data using USB or Bluetooth 4.0 and manage the results through EvoLog software, where applicable.
Frequently Asked Questions
1. What torque range does the ET2-92-4000-230 cover?
This listing covers 400–4,000 N·m through a 1" square drive. Norbar calibrates EvoTorque 2 from 20% to 100% of maximum capacity, so check that your lowest required bolt torque falls within the calibrated range.
2. How accurate is EvoTorque 2?
It provides ±3% accuracy and repeatability of the set value within its calibrated range, on joints of 30° and above.
3. Can it store and export torque data?
Yes. It stores up to 3,000 time- and date-stamped readings and supports data transfer by USB or Bluetooth 4.0 to EvoLog software.
4. What does the Pelicase add?
The rugged, sealed carry case protects the tool, reaction arm and accessories during storage and transport between sites.
5. Which voltage do I need?
This version operates on 230 V mains. Confirm the available power supply and the manufacturer's electrical requirements before connecting the tool.
6. Should I choose the ET2-92-4000-230 with or without Pelicase?
Choose according to your torque requirements and transport needs. The Pelicase version provides a protective carrying solution for moving the tool and accessories between sites. Contact our team to confirm the correct package.
7. How do I get a UAE price and lead time?
Contact General Tech Services LLC for current pricing, availability and lead time.
Request a quote for the Norbar EvoTorque 2 ET2-92-4000-230 today. Call +971 6 5436933.
