Mitutoyo 7321A | Dial Thickness Gauge | 0-10 mm range, 120 mm depth
The Mitutoyo 7321A is a Series 7 dial thickness gauge with a 0-10 mm measuring range. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.
Part No.: 7321A
Contact: +966 531 321586
Checking the thickness of sheet, film, paper, rubber or gaskets with calipers can be slow and inconsistent because operator pressure can change the reading. The Mitutoyo 7321A is a dedicated dial thickness gauge with a 0-10 mm measuring range.
The spring-loaded spindle and anvil close on the material with consistent force, while the dial shows the thickness directly, making inspection fast and repeatable from one operator to the next. It is genuine Mitutoyo, supplied through an authorised distributor.
Typical uses include goods-in inspection of sheet, film and paper, rubber, gasket and textile thickness checks, and production line spot checks. Dial thickness gauges are widely used for goods-in inspection and production checks for paper, plastics, textiles, rubber, foil and sheet materials where many quick readings are required.
For the best accuracy, keep the anvil and spindle faces clean, zero the gauge with the faces closed before each batch, and lower the spindle gently rather than letting it snap onto the material.
Before ordering, confirm the thickness range you need and the type of material being measured, as very soft or compressible materials may require a specific anvil or measuring force. Our team can help you choose the appropriate instrument and can also arrange calibration.
Comparing options? See the Mitutoyo 7305A (0-20 mm) before you order.
Key Benefits
-
Fast, direct thickness readings
-
0-10 mm measuring range
-
Consistent measuring force for repeatability
-
Simple to use at the bench or on the production line
-
Genuine Mitutoyo Series 7
-
Genuine Mitutoyo from an authorised distributor in Saudi Arabia
Contact: +966 531 321586
Who This Product Is Best For
-
Goods-in inspection of sheet, film and paper
-
Rubber, gasket and textile thickness checks
-
Production line spot checks
How to Specify & Install It
-
Clean the anvil and spindle faces.
-
Close the faces and set the dial to zero.
-
Lift the spindle, place the material between the measuring faces and lower it gently.
-
Read the dial and record the thickness.
Frequently Asked Questions
What can a dial thickness gauge measure?
It can be used for checking the thickness of sheet, film, paper, plastics, rubber, textiles, foil and similar materials.
What is the measuring range?
The Mitutoyo 7321A has a 0-10 mm measuring range.
Should I choose the 7321A or the 7305A?
The Mitutoyo 7305A offers a 0-20 mm measuring range, while the 7321A offers a 0-10 mm range. Match the measuring range and application to the material you need to inspect.
How should I care for the instrument?
Wipe the contact surfaces clean after use, store the gauge in its case away from heat, humidity and coolant, and avoid knocks to the contact point or spindle. Regular calibration helps maintain measurement accuracy.
Can the instrument be calibrated?
General Tech Saudi provides calibration services for dimensional instruments. Ask the team about calibration when you order.
Can you supply other Mitutoyo instruments in the same order?
Yes. General Tech supplies a wide range of Mitutoyo micrometers, indicators, gauges and accessories. Share your requirements and the team can quote them together.
Is genuine Mitutoyo available in Saudi Arabia?
Yes. General Tech is an authorised Mitutoyo distributor in Saudi Arabia. Contact the team for current pricing, availability and lead time.
Contact: +966 531 321586
