{"product_id":"mitutoyo-227-216-20-absolute-digital-adjustable-measuring-force-micrometer-4-8-10-16-20-32-mm","title":"Mitutoyo 227-216-20 ABSOLUTE Digital Adjustable Measuring Force Micrometer, .4′′ – .8′′ (10.16 - 20.32 mm)","description":"\u003ch3\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMitutoyo 227-216-20 ABSOLUTE Micrometer with Adjustable Measuring Force, 0.4–0.8\" (10.16–20.32 mm), 2–10 N\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMitutoyo 227-216-20 Adj. Force Micrometer .4-.8\" | KSA\u003c\/p\u003e\n\u003ch2\u003ePRODUCT SUMMARY\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 227-216-20 adjustable measuring force micrometer measures 0.4–0.8\" (10.16–20.32 mm) with 0.00005\" (0.001 mm) resolution and ±0.0001\" instrumental accuracy. Five measuring-force settings from 2 to 10 N help provide controlled contact when measuring plastic bushings, rubber seals, thin-walled aluminium sleeves and other parts that can deform under pressure. A standard bar is supplied for origin setting, while the ABSOLUTE scale and Digimatic SPC output support repeatable inspection. Contact General Tech at +966 569 289 544 for a quote.\u003c\/p\u003e\n\u003ch2\u003ePRODUCT DESCRIPTION\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 227-216-20 is a digital outside micrometer designed for measuring 0.4–0.8\" (10.16–20.32 mm) components where controlled measuring force is important.\u003c\/p\u003e\n\u003cp\u003eSoft plastics, rubber-covered components and thin-walled metal parts can change dimension when excessive pressure is applied. The adjustable measuring-force mechanism allows the operator to select a defined contact load before taking the measurement.\u003c\/p\u003e\n\u003cp\u003eFive measuring-force settings are available: 2, 4, 6, 8 and 10 N. Once the selected force is reached, the built-in constant-force mechanism stops and holds the measurement contact. Using the same force setting across operators can help maintain consistent inspection conditions.\u003c\/p\u003e\n\u003cp\u003eThe micrometer provides 0.00005\" (0.001 mm) resolution and ±0.0001\" instrumental accuracy. Its carbide-tipped measuring faces have a micro-lapped finish, with 0.3 µm flatness and 2 µm parallelism. The Ø6.35 mm spindle is non-rotating, helping maintain stable alignment against round and flat workpieces.\u003c\/p\u003e\n\u003cp\u003eThe spindle advances 0.4\" (10 mm) per revolution for rapid movement across the measuring range. A supplied standard bar is used to establish the origin at the lower end of the range. The ABSOLUTE linear scale retains the established origin after power-off, reducing the need for repeated re-zeroing.\u003c\/p\u003e\n\u003cp\u003eThe LCD supports inch\/mm conversion, while functions include Zero\/ABS, Origin, Hold\/Data and ON\/OFF. Low-voltage and counting-error alarms provide additional operating feedback, and automatic power-off can occur after approximately 20 minutes.\u003c\/p\u003e\n\u003cp\u003eDigimatic SPC output allows measurements to be transferred to compatible inspection and data-collection systems using suitable SPC cables. The instrument uses one SR44 battery and is supplied with a fitted plastic case.\u003c\/p\u003e\n\u003cp\u003eFor smaller components below 0.4\", the Mitutoyo 227-215-20 can be considered. For larger parts from 0.8–1.2\", the 227-217-20 provides a higher measuring range with the same adjustable 2–10 N force concept. For very soft applications requiring lower contact force, the 227-211-20 provides a lower force range.\u003c\/p\u003e\n\u003ch2\u003eKEY BENEFITS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eMeasures 0.4–0.8\" (10.16–20.32 mm) with adjustable measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFive selectable force settings: 2, 4, 6, 8 and 10 N.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHelps control contact pressure on plastics, rubber, thin-walled parts and soft alloys.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProvides 0.00005\" (0.001 mm) resolution and ±0.0001\" instrumental accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCarbide-tipped, micro-lapped measuring faces support precision inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNon-rotating Ø6.35 mm spindle helps maintain stable contact with the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e10 mm spindle feed per revolution provides fast movement across the range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eABSOLUTE linear scale retains the origin after power-off.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied standard bar supports origin setting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInch\/mm conversion supports different measurement requirements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHold\/Data function supports measurement recording during inspection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDigimatic SPC output enables electronic measurement-data transfer.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSR44 battery and fitted plastic case are supplied.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eContact General Tech at +966 569 289 544 for Mitutoyo 227-216-20 pricing and availability in Saudi Arabia.\u003c\/p\u003e\n\u003ch2\u003eWHO THIS PRODUCT IS BEST FOR\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 227-216-20 is suited to automotive component manufacturers, plastics and rubber manufacturers, machine shops, oil and gas workshops, maintenance teams and quality-control laboratories that inspect 10–20 mm components where measuring force can affect the result.\u003c\/p\u003e\n\u003cp\u003eTypical applications include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eNylon and PTFE bushings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRubber seals and grommets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThin-walled aluminium sleeves\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMoulded plastic pins\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSoft-metal fittings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCoated or finished components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmall shafts and cylindrical parts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eComponents that can deform under excessive measuring pressure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe adjustable force mechanism can be particularly useful when several operators inspect the same component and a consistent measuring condition is required.\u003c\/p\u003e\n\u003ch2\u003eHOW TO USE \/ HOW IT WORKS\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClean the measuring faces:\u003c\/strong\u003e Remove chips, dirt and residue from the carbide faces and the workpiece.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSet the origin:\u003c\/strong\u003e Place the supplied standard bar between the measuring faces and establish the reference position at 0.4\".\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSelect the measuring force:\u003c\/strong\u003e Choose 2, 4, 6, 8 or 10 N according to the material and inspection requirement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePosition the workpiece:\u003c\/strong\u003e Place the micrometer squarely around the measured feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eApply the selected force:\u003c\/strong\u003e Turn the thimble until the constant-force mechanism reaches the selected setting and holds the contact.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRead the measurement:\u003c\/strong\u003e Check the LCD display and use inch or millimetre units as required.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eRecord or transfer the result:\u003c\/strong\u003e Use Hold\/Data for inspection records or transfer the measurement through the Digimatic SPC output to compatible equipment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eMaintain consistency:\u003c\/strong\u003e For repeated measurements, use the same force setting and measurement position across operators and parts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFREQUENTLY ASKED QUESTIONS\u003c\/h2\u003e\n\u003ch3\u003eWhat is the measuring range of the Mitutoyo 227-216-20?\u003c\/h3\u003e\n\u003cp\u003eThe micrometer measures 0.4–0.8\" (10.16–20.32 mm).\u003c\/p\u003e\n\u003ch3\u003eWhat measuring-force settings are available?\u003c\/h3\u003e\n\u003cp\u003eThe 227-216-20 provides five selectable settings: 2, 4, 6, 8 and 10 N.\u003c\/p\u003e\n\u003ch3\u003eWhy is adjustable measuring force useful?\u003c\/h3\u003e\n\u003cp\u003eIt allows the operator to control contact pressure when measuring parts that can deform or change dimension under excessive force, including plastics, rubber components and thin-walled metal parts.\u003c\/p\u003e\n\u003ch3\u003eWhat is the resolution?\u003c\/h3\u003e\n\u003cp\u003eThe resolution is 0.00005\" (0.001 mm).\u003c\/p\u003e\n\u003ch3\u003eWhat is the stated accuracy?\u003c\/h3\u003e\n\u003cp\u003eThe stated instrumental accuracy is ±0.0001\".\u003c\/p\u003e\n\u003ch3\u003eIs a standard bar supplied?\u003c\/h3\u003e\n\u003cp\u003eYes. A standard bar is included for origin setting.\u003c\/p\u003e\n\u003ch3\u003eDoes the spindle rotate during measurement?\u003c\/h3\u003e\n\u003cp\u003eNo. The Ø6.35 mm spindle is non-rotating, helping maintain stable contact with the measured surface.\u003c\/p\u003e\n\u003ch3\u003eDoes the ABSOLUTE scale retain the origin?\u003c\/h3\u003e\n\u003cp\u003eYes. The ABSOLUTE linear scale retains the established origin after power-off.\u003c\/p\u003e\n\u003ch3\u003eWhat battery does the micrometer use?\u003c\/h3\u003e\n\u003cp\u003eIt uses one SR44 battery. Mitutoyo's stated battery life is approximately one year; actual life can vary depending on usage and operating conditions.\u003c\/p\u003e\n\u003ch3\u003eDoes it provide SPC output?\u003c\/h3\u003e\n\u003cp\u003eYes. Digimatic SPC output is available for transferring measurements to compatible inspection and data-collection equipment.\u003c\/p\u003e\n\u003ch3\u003eWhich model should I choose?\u003c\/h3\u003e\n\u003cp\u003eChoose the 227-216-20 for 0.4–0.8\" parts requiring adjustable 2–10 N measuring force. The 227-215-20 covers smaller parts below 0.4\", while the 227-217-20 covers 0.8–1.2\". The 227-211-20 is designed for very soft applications requiring lower measuring force.\u003c\/p\u003e\n\u003ch3\u003eWhat is the 227-216-22?\u003c\/h3\u003e\n\u003cp\u003eMitutoyo America lists the 227-216-22 as a newer US listing. Confirm the exact version and availability with General Tech before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhere can I buy the Mitutoyo 227-216-20 in Saudi Arabia?\u003c\/h3\u003e\n\u003cp\u003eContact General Tech Shop at +966 569 289 544 or \u003ca href=\"mailto:mathews@generaltechsaudi.com\"\u003emathews@generaltechsaudi.com\u003c\/a\u003e for availability and pricing in Saudi Arabia.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170237059185,"sku":"227-216-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-absolute-digimatic-micrometers-quickmike-default-title-mitutoyo-227-216-20-absolute-digital-adjustable-measuring-force-micrometer-inch-metric-range-4-8-10-16-20-32-mm-25382038995057.png?v=1761751294","url":"https:\/\/www.generaltechshop.sa\/products\/mitutoyo-227-216-20-absolute-digital-adjustable-measuring-force-micrometer-4-8-10-16-20-32-mm","provider":"General Tech Services LLC","version":"1.0","type":"link"}