Mitutoyo 1230A-01 | Dial Gauge | 2.5 mm Range, 0.01 mm Graduation, Lug Back
Part No. 1230A-01 | Range 2.5 mm | Graduation 0.01 mm | Lug Back
Product Overview
The Mitutoyo 1230A-01 is an ANSI/AGD-type plunger dial gauge with a lug back design, 0.01 mm graduation and a 2.5 mm measuring range. It is designed for routine comparative measurement, runout inspection and machine or workpiece setup where a compact measuring range is required.
Made to American Gage Design dimensions, the 1230A-01 is suitable for use with compatible inspection stands, holders, magnetic bases and fixtures. The lug back provides a fixed rear mounting point, allowing the gauge to be securely fastened to brackets, fixtures or machines where direct mounting is preferred.
The 2.5 mm measuring range provides practical travel for general shop-floor inspection and comparative measurement. Its mechanical movement is suited to day-to-day checking of dimensional deviations, alignment and runout during machining and inspection operations.
Need a flat back version instead? See the Mitutoyo 1230AB-01.
Key Benefits
-
0.01 mm graduation for clear, practical readings
-
2.5 mm measuring range for routine comparative and setup work
-
ANSI/AGD standard design for compatibility with common stands, holders and accessories
-
Lug back for direct, secure mounting to brackets and fixtures
-
Robust mechanical movement for dependable workshop use
-
Genuine Mitutoyo part supplied and supported locally in Saudi Arabia
+966 569 289 544 for pricing and stock availability.
Who This Product Is Best For
-
Machinists and inspectors carrying out routine comparative checks and setups
-
Toolrooms and machine shops setting up workpieces, fixtures and machine alignment
-
Maintenance teams replacing an existing ANSI/AGD lug back gauge with a like-for-like part
-
Calibration labs and buyers standardising their inspection equipment on Mitutoyo
How to Use It
-
Mount the gauge by its lug back or stem to a rigid bracket or fixture, keeping the plunger square to the surface being measured.
-
Pre-load the plunger slightly, then rotate the bezel to set zero against a reference surface or master.
-
Move the part or gauge across the feature and read the deviation directly from the dial.
-
Retract the plunger gently after use and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 1230A-01 dial gauge used for?
It is used for routine comparative checks, runout inspection and setup work on the shop floor. The 0.01 mm graduation and 2.5 mm range make it suitable for general shop-floor inspection.
What are the graduation and measuring range of the 1230A-01?
The Mitutoyo 1230A-01 has a 0.01 mm graduation and a 2.5 mm measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to the American Gage Design standard for dial indicators. Gauges built to this standard use common dimensions, allowing compatibility with many stands, holders and accessories.
What is the benefit of a lug back?
A lug back provides a fixed mounting point, allowing the gauge to be fastened directly to a bracket or fixture.
Should I choose the lug back 1230A-01 or the flat back 1230AB-01?
Both models have a 0.01 mm graduation and a 2.5 mm measuring range. Choose the lug back 1230A-01 when direct mounting to a bracket or fixture is preferred, or the 1230AB-01 flat back version when that mounting configuration better suits your setup.
Is the genuine Mitutoyo 1230A-01 available in Saudi Arabia?
Yes. General Tech Services LLC supplies genuine Mitutoyo 1230A-01 dial gauges in Saudi Arabia. Call +966 569 289 544 for pricing, lead time and current availability.
Request Pricing and Availability
For genuine Mitutoyo 1230A-01 dial gauges in Saudi Arabia, contact General Tech Services LLC for current pricing and availability.
+966 569 289 544
