Mitutoyo 1011AB-11 | Dial Gauge | 0.5 mm, 0.002 mm, 0-10-0, flat back
Part No. 1011AB-11 | Range 0.5 mm | Graduation 0.002 mm | Flat Back | Jewelled Bearing
Product Overview
The Mitutoyo 1011AB-11 is an ANSI/AGD-type plunger dial gauge with a flat back, 0.002 mm graduation, a 0.5 mm measuring range and jewelled bearings. It is designed for high-resolution comparative measurement, precision inspection and applications where very small deviations need to be detected.
Made to American Gage Design dimensions, the 1011AB-11 is suitable for use with compatible inspection stands, holders, magnetic bases and fixtures. The flat-back configuration provides a clean rear profile for stem-mounted setups, while its jewelled bearings support smooth and sensitive pointer movement.
The 0.5 mm measuring range provides precise travel for fine comparative inspection without requiring the longer stroke of a general-purpose gauge. It can be used for checking precision-ground components, setting gauges, dimensional deviations and comparing parts against a reference or master.
Comparing versions? The Mitutoyo 1011A-11 is also listed with a 0.002 mm graduation and 0.5 mm range. Confirm the exact mounting configuration before ordering when replacing an existing gauge.
Key Benefits
-
0.002 mm graduation for fine, high-resolution measurement readings
-
0.5 mm measuring range for precision comparative inspection
-
ANSI/AGD-type design for compatibility with suitable stands and holders
-
Flat back for stem-mounted applications
-
Jewelled bearings for smooth, low-friction pointer movement
-
Suitable for precision comparative checks and fine tolerance inspection
-
Genuine Mitutoyo instrument supplied in Saudi Arabia
+966 569 289 544 for pricing and stock availability.
Who This Product Is Best For
-
Quality-control inspectors requiring high resolution for comparative measurement
-
Machinists and inspectors performing precision comparative checks
-
Toolrooms and machine shops carrying out workpiece, fixture and machine setup
-
Maintenance teams replacing an existing ANSI/AGD flat-back dial gauge
-
Calibration and inspection departments using Mitutoyo measurement equipment
How to Use It
-
Mount the dial gauge securely by its stem in a suitable stand, magnetic base or fixture.
-
Position the plunger squarely against the surface or feature being measured.
-
Apply a small amount of pre-travel to establish reliable contact.
-
Rotate the bezel to set the pointer to zero against a reference surface or master.
-
Move the workpiece or gauge across the feature and observe the pointer movement to determine the deviation.
-
After measurement, retract the plunger carefully and store the gauge clean, dry and protected.
Frequently Asked Questions
What is the Mitutoyo 1011AB-11 dial gauge used for?
The Mitutoyo 1011AB-11 is designed for high-resolution comparative inspection where very small deviations matter. Its 0.002 mm graduation and 0.5 mm measuring range make it suitable for fine-tolerance measurement applications.
What are the graduation and measuring range of the 1011AB-11?
The Mitutoyo 1011AB-11 has a 0.002 mm graduation and a 0.5 mm measuring range.
What does ANSI/AGD mean on a dial gauge?
ANSI/AGD refers to American Gage Design dimensions used for dial indicators. This design provides dimensional compatibility with suitable stands, holders and inspection fixtures.
What is the benefit of the flat-back design?
The flat-back configuration provides a clean rear profile and is suitable for applications where the gauge is mounted by its stem in a stand, magnetic base or custom fixture.
What is the benefit of jewelled bearings?
Jewelled bearings help reduce internal friction and support smooth, sensitive pointer movement, making them suitable for fine comparative measurement applications.
Which should I choose: the 1011AB-11 or the 1011A-11?
Both are listed with an ANSI/AGD design, 0.002 mm graduation, 0.5 mm measuring range and flat-back configuration. Contact +966 569 289 544 to confirm the exact configuration against your existing gauge before ordering.
Is the genuine Mitutoyo 1011AB-11 available in Saudi Arabia?
General Tech Services LLC supplies genuine Mitutoyo instruments in Saudi Arabia. Contact +966 569 289 544 for current pricing, lead time and stock availability.
Request Pricing and Availability
For genuine Mitutoyo 1011AB-11 dial gauges in Saudi Arabia, contact General Tech Services LLC for current pricing and availability.
+966 569 289 544
