Dwyer Instruments IF2715 | Industrial direct reading flowmeter | Max. flow rate 26 GPM (98 LPM) water | Pressure drop 70" w.c. | 1" female NPT
Genuine Dwyer instruments from General Tech Services LLC, Saudi Arabia, with free Saudi Arabia shipping available.
Part No. IF2715
Product Overview
The Dwyer IF2715 is a Series IF industrial direct reading flowmeter designed to provide an immediate flow indication without requiring correlation charts. It measures up to 26 GPM (98 LPM) of water and features a 1" female NPT connection for compatible process and utility piping.
The flowmeter uses a borosilicate glass tube with a 316 stainless steel float, guide rods, float stops and end fittings. Fluoroelastomer O-rings provide sealing, while the detachable 3/16-inch-thick polycarbonate front shield protects the flow tube. The side panels are constructed from 304 stainless steel.
The IF2715 provides ±3% of full-scale accuracy, ±0.5% of full-scale repeatability and a 10:1 turndown. Maximum operating pressure is 200 psi (13.8 bar), or 125 psi for tube sizes 5 and 6, with a maximum temperature of 200°F (93°C). The meter is designed for vertical mounting.
Typical applications include cooling-water and process-water lines, filtration and treatment skids, compressed-air distribution systems where an appropriate air-rated configuration is specified, and industrial test benches.
Before ordering, confirm the required flow range, fluid, operating pressure, operating temperature and connection size.
Key Benefits
- Direct reading of water flow up to 26 GPM (98 LPM)
- ±3% full-scale accuracy and ±0.5% full-scale repeatability
- 10:1 turndown
- 1" female NPT connection
- Borosilicate glass flow tube
- 316 stainless steel wetted float, guide rods, stops and fittings
- Detachable polycarbonate front shield
- 304 stainless steel side panels
- Vertical mounting configuration
- Maximum pressure up to 200 psi (13.8 bar), subject to tube-size limitation
Who This Product Is Best For
- Process and utility engineers requiring direct flow indication
- Water-treatment and filtration applications
- Cooling-water and process-water systems
- Industrial maintenance teams replacing a compatible Dwyer Series IF meter
- Test benches and process equipment requiring local flow indication
- Saudi Arabian industrial buyers sourcing genuine Dwyer instrumentation
How to Install & Use It
- Confirm that the required flow range, fluid, pressure and temperature are suitable for the IF2715.
- Mount the flowmeter vertically, with flow entering through the bottom inlet.
- Connect the 1" female NPT ports using compatible fittings and suitable thread-sealing practices.
- Ensure the installation is secure and that the flow tube can be viewed clearly.
- Open the supply gradually and allow the flow to stabilise.
- Read the flow directly from the meter scale at the float position.
Follow applicable Dwyer installation instructions and site safety procedures during installation and commissioning.
Frequently Asked Questions
What is the maximum flow of the Dwyer IF2715?
The maximum listed water flow is 26 GPM (98 LPM).
How accurate is the IF2715?
The listed accuracy is ±3% of full scale, with ±0.5% of full-scale repeatability and a 10:1 turndown.
What pressure and temperature can the IF2715 handle?
Maximum operating pressure is 200 psi (13.8 bar), or 125 psi for tube sizes 5 and 6. Maximum operating temperature is 200°F (93°C).
What is the connection size?
The Dwyer IF2715 uses 1" female NPT connections.
Can the IF2715 measure air?
The supplied specification lists the IF2715 with a water flow rating only. Contact General Tech Services about an appropriate air-rated Series IF configuration if air measurement is required.
How does the IF2715 compare with the Dwyer IF2716?
Both are Series IF direct reading flowmeters, but the listed configurations differ. The IF2715 is rated for up to 26 GPM of water with a 1" NPT connection, while the IF2716 is listed for 41 GPM water and 160 SCFM air with a 2" NPT connection. Selection should be based on the required flow range, fluid and installation requirements.
What information should I provide when requesting a quote?
Provide the model number, quantity and delivery city, together with application details such as fluid, required flow range, operating pressure and temperature. This helps confirm the appropriate configuration.
How much does the Dwyer IF2715 cost?
Pricing is quote-based. Contact General Tech Services LLC for current price and lead-time information.
Request a Quote Today
For pricing, availability or ordering assistance, contact General Tech Services LLC — Saudi Office, Dammam.
Call +966 569 289 544 | www.generaltechshop.sa
