ASCO PROFILED/TIE RODS CYLINDERS ˜ 32 to 200 mm - double acting ISO 15552-AFNOR-DIN with FPM seals for aggressive environments,Series 450-453, Type PES

Part No. Series 450/452/453 U Guiding Unit

The ASCO U guiding unit is designed for ISO 15552 (AFNOR/DIN) pneumatic cylinders from 32 to 100 mm bore in Series 450, 452 and 453, including PES and PLS types. It uses two guide rods running through 4 slide bearings to help prevent rod rotation and absorb side-loads from rod-mounted tooling. Genuine ASCO guiding unit, supplied in the UAE by General Tech Services LLC. Pricing is quote-based. Request a quote in under a minute - call +971 6 543 6933.

The U guiding unit supports applications where tooling or loads mounted to the cylinder rod create lateral forces or torque. The guide rods and four slide bearings handle these loads while allowing the cylinder to provide its normal pushing and pulling motion.

The unit can be integrated into machine fixtures using the available frame and load mounting arrangements, including tapped and spotfaced holes and centring holes.

When selecting a guiding unit, confirm the compatible cylinder series, bore, stroke, load and mounting arrangement. Share these details with our team so we can confirm the appropriate configuration and accessories.

For applications that also require the cylinder rod to remain locked during air loss, a rod-lock cylinder provides dynamic rod locking.

Ready to order the ASCO U guiding unit? Speak to our team. Call +971 6 543 6933

Key Benefits

• Fits ISO 15552 (AFNOR/DIN) cylinders from 32 to 100 mm bore

• Compatible with ASCO Series 450, 452 and 453 cylinders, including PES/PLS types

• Four slide bearings for absorbing side-loads

• Helps prevent rotation of rod-mounted tooling

• Two guide rods provide additional support for offset loads

• Flexible frame and load mounting options

• Suitable for retrofit applications using compatible ISO cylinders

• Genuine ASCO accessory supplied in the UAE by General Tech Services LLC

Who This Product Is Best For

• Lifting, pushing and transfer applications with offset loads

• Machine tooling mounted directly to a cylinder rod

• Existing ISO cylinder installations requiring additional guidance

• Machine builders handling side-loads and rod rotation

• Applications where slide bearings are preferred for their tolerance to dust

How to Install & Use It

1. Confirm the cylinder series, bore, stroke and guiding-unit compatibility.

2. Fit the U guiding unit to the front end of the compatible ISO cylinder.

3. Mount the guiding unit securely to the machine frame.

4. Attach and secure the load plate or tooling to the guiding unit.

5. Cycle the mechanism slowly and check alignment and free movement.

6. Run the cylinder at the required operating speed after confirming correct alignment.

Frequently Asked Questions

What does the ASCO U guiding unit do?
It helps prevent cylinder-rod rotation and absorbs side-loads using two guide rods supported by four slide bearings.

Which cylinders does the U guiding unit fit?
It is designed for ISO 15552 (AFNOR/DIN) cylinders from 32 to 100 mm bore in ASCO Series 450, 452 and 453, including PES and PLS types.

Why use a guiding unit with a pneumatic cylinder?
A guiding unit supports lateral loads and helps control rotation when tooling or loads are mounted to the cylinder rod.

Does this version use slide bearings or ball bushings?
This U guiding unit uses four slide bearings. The supplied product information describes them as suitable for applications where tolerance to dust is useful.

Can I retrofit the U guiding unit?
It can be fitted to compatible existing ISO cylinders when the cylinder series, bore, stroke and mounting arrangement match the guiding-unit requirements. Confirm compatibility before installation.

How do I choose the correct U guiding unit?
Confirm the cylinder series, bore, stroke, load, tooling arrangement and mounting requirements. Send these details to General Tech Services LLC for compatibility confirmation.

Can I also lock the cylinder rod?
For applications requiring dynamic rod locking, a rod-lock cylinder can provide a rod-locking function. Confirm the required configuration with General Tech Services LLC.

How do I get a price and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.

Is this a genuine ASCO guiding unit?
General Tech Services supplies original ASCO accessories in the UAE with technical support.

For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.