ASCO CYLINDERS WITH PROFILED BARREL ˜ 32 to 100 mm - double acting ISO 15552-AFNOR-DIN with pneumatic cushioning, Series 453, Type PES P-DM
Part No. Series 453 PES-P-DM
The ASCO Series 453 PES-P-DM is a double-acting pneumatic cylinder with a profiled aluminium barrel, ISO 15552 (AFNOR/DIN) dimensions and pneumatic cushioning. Available in 32 to 100 mm bore sizes, it is designed for industrial automation applications requiring controlled end-of-stroke deceleration. Genuine ASCO cylinder, supplied in the UAE by General Tech Services LLC. Pricing is quote-based. Request a quote in under a minute - call +971 6 543 6933.
Pneumatic cushioning helps decelerate the piston before it reaches the cylinder end caps, reducing the impact associated with high-speed operation. This makes the Series 453 PES-P-DM suitable for automation axes where smooth end-of-stroke movement is required.
The profiled barrel incorporates grooves for compatible position detectors such as ASCO Series 494, allowing end-position feedback to be integrated without separate sensor brackets. Double-acting operation provides controlled pneumatic movement in both directions.
ISO 15552 dimensions allow the cylinder to be used with compatible standard ISO mountings, rod-end accessories and guiding units. When specifying the cylinder, confirm the required bore, stroke, mounting arrangement, working pressure, load and operating environment.
Ready to order the ASCO Series 453 PES-P-DM? Speak to our team. Call +971 6 543 6933
Key Benefits
-
Genuine ASCO Series 453 PES-P-DM pneumatic cylinder
-
ISO 15552 (AFNOR/DIN) standard dimensions
-
32 to 100 mm bore range
-
Double-acting operation for controlled movement in both directions
-
Profiled aluminium barrel
-
Pneumatic cushioning for controlled end-of-stroke deceleration
-
Integrated barrel grooves for compatible position detectors
-
Compatible with suitable ISO mountings, rod ends and guiding units
Who This Product Is Best For
-
High-speed industrial automation systems requiring controlled end-of-stroke movement
-
Machine builders standardising on ISO 15552 cylinders
-
OEMs replacing existing cushioned ISO cylinders
-
Automation integrators building pick-and-place and linear-motion axes
-
Applications requiring integrated cylinder position feedback
How to Install & Use It
-
Determine the required bore, stroke, mounting arrangement, load, speed and operating environment.
-
Select suitable ISO mounting and rod-end accessories for the cylinder configuration.
-
Install compatible Series 494 position detectors in the barrel grooves if end-position feedback is required.
-
Connect clean, dry, filtered compressed air to the cylinder.
-
Set the operating speed and pneumatic cushioning appropriately.
-
Test the cylinder under controlled load conditions before running at the normal machine cycle rate.
Frequently Asked Questions
What is the ASCO Series 453 PES-P-DM cylinder?
It is a double-acting profiled-barrel pneumatic cylinder designed to ISO 15552 (AFNOR/DIN), available in 32 to 100 mm bore sizes with pneumatic cushioning.
What is pneumatic cushioning?
Pneumatic cushioning uses trapped air near the end of the stroke to decelerate the piston before it reaches the end cap, helping provide smoother end-of-stroke movement.
Is the Series 453 interchangeable with other ISO cylinders?
The ISO 15552 standard defines compatible mounting and rod-end dimensions. Confirm the complete cylinder configuration and machine requirements before replacement.
Can I add position sensors?
Yes. The profiled barrel has integrated grooves for compatible position detectors such as ASCO Series 494 sensors.
How do I choose the correct bore and stroke?
Consider the required force, available working pressure, load, operating speed, required travel and machine mounting. Provide these details to General Tech Services LLC for configuration confirmation.
How do I calculate the required cylinder bore?
The required bore depends on the force required, available working pressure, friction and dynamic loads. A suitable allowance should be included for the application conditions. General Tech Services LLC can assist with the sizing calculation when you provide the application data.
What type of compressed air does it need?
Use clean, dry and filtered compressed air. If lubrication is introduced, maintain it consistently according to the applicable cylinder requirements.
Is there an alternative Series 453 version?
A Series 453 cylinder with an omega piston seal is available as an alternative seal configuration. Contact General Tech Services LLC to confirm suitability and availability.
How do I get pricing and availability?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
Is this a genuine ASCO cylinder?
General Tech Services supplies original ASCO cylinders in the UAE with technical support.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
