{"title":"Micrometers","description":"\u003cp\u003eMicrometers are grouped here into outside micrometers and sets, inside micrometers, special-purpose micrometers, micrometer heads, thread and gear micrometers, and depth micrometers. Mechanical and digital versions are both listed, along with a micrometer checker.\u003c\/p\u003e\u003cp\u003eThey are used in machine shops, toolrooms and quality labs wherever small dimensions must be confirmed. Choose by measuring range, resolution, anvil style, and whether a digital display or a mechanical thimble suits the operator and the shop floor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChecking shaft diameters after turning\u003c\/li\u003e\n\u003cli\u003eVerifying bore size on machined parts\u003c\/li\u003e\n\u003cli\u003eInspecting thread and gear features in toolrooms\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrowse by type: \u003ca href=\"\/collections\/measurement-outside-micrometers\"\u003eOutside Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-inside-micrometers\"\u003eInside Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-special-purpose-micrometers\"\u003eSpecial-Purpose Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-micrometer-heads\"\u003eMicrometer Heads\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-thread-and-gear-micrometers\"\u003eThread \u0026amp; Gear Micrometers\u003c\/a\u003e, \u003ca href=\"\/collections\/measurement-depth-micrometers\"\u003eDepth Micrometers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"mitutoyo-293-185-digimatic-quantumike-micrometer-0-25mm-0-1-inch","title":"Mitutoyo 293-185 | Digimatic QuantuMike Micrometer | 0-1 in (0-25 mm), no output","description":"\u003cp\u003eMitutoyo's 293-185 is a rapid-action, waterproof QuantuMike digital micrometer covering 0-25 mm \/ 0-1 in, reading to 0.001 mm or 0.00005 in. It has no data output; a heat shield in the frame helps hold accuracy over long measuring sessions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-25 mm \/ 0-1 in with inch\/metric readout\u003c\/li\u003e\n\u003cli\u003eAccuracy ±0.00005 in (±1 µm)\u003c\/li\u003e\n\u003cli\u003eFaster measuring than a standard micrometer\u003c\/li\u003e\n\u003cli\u003eStable frame with built-in heat shield\u003c\/li\u003e\n\u003cli\u003eRatchet thimble for repeatable readings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606514801,"sku":"293-185","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-185-digimatic-quantumike-micrometer-0-25mm-0-1-inch-25390664155249.jpg?v=1761753662"},{"product_id":"mitutoyo-103-137-outside-micrometer-0-25mm-graduation-0-01-mm","title":"Mitutoyo 103-137 | Outside Micrometer | 0-25 mm, 0.01 mm","description":"\u003cp\u003eMitutoyo 103-137 is a basic, cost-effective mechanical outside micrometer for 0-25 mm, graduated in 0.01 mm with ±2 µm accuracy. The 0-25 mm, 0.01 mm version has a baked-enamel finished frame and carbide measuring faces, with a ratchet stop for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-25 mm, graduation 0.01 mm\u003c\/li\u003e\n\u003cli\u003eAccuracy ±2 µm on the 0-25 mm, 0.01 mm model\u003c\/li\u003e\n\u003cli\u003eCarbide measuring faces, baked-enamel frame (103-137)\u003c\/li\u003e\n\u003cli\u003eRatchet stop for constant force (0-25 mm, 0.01 mm)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606580337,"sku":"103-137","price":199.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-default-title-mitutoyo-103-137-outside-micrometer-0-25mm-graduation-0-01-mm-25390664188017.jpg?v=1761753665"},{"product_id":"mitutoyo-digimatic-micrometer-head-25mm-1","title":"Mitutoyo 350-351-30 | Digimatic Micrometer Head | 25 mm \/ 1 in, plain stem, ratchet stop","description":"\u003cp\u003eThis Mitutoyo 350-351-30 digital micrometer head covers 25 mm or 1 in and reads 0.001 mm or 0.00005 in, using a plain stem and a flat spindle tip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy ±2 µm \/ ±0.0001 in\u003c\/li\u003e\n\u003cli\u003eFlat spindle end with carbide tip\u003c\/li\u003e\n\u003cli\u003eRatchet stop\u003c\/li\u003e\n\u003cli\u003eDigimatic data output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606613105,"sku":"350-351-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digital-micrometer-heads-default-title-mitutoyo-digimatic-micrometer-head-25mm-1-25387038310513.jpg?v=1761753662"},{"product_id":"mitutoyo-141-121-interchangeable-rod-inside-micrometer-8-20-graduation-001","title":"Mitutoyo 141-121 | Interchangeable Rod Inside Micrometer | 8-20 in, .001 in","description":"\u003cp\u003eThe Mitutoyo 141-121 is an interchangeable rod inside micrometer covering 8-20 in with 3 rods and a .001 in graduation. Each rod is marked with its range, and spacing collars combine with the rods to reach the full 8-20 in span of the 141-121. On the 141-121, a screw-in handle extension lets the head reach deep into a hole, and the sleeve can be rotated to adjust the index line when setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 interchangeable rods for 8-20 in\u003c\/li\u003e\n\u003cli\u003eStroke 1 in, graduation .001 in (141-121)\u003c\/li\u003e\n\u003cli\u003eSpacing collars used with the rods on the 8-20 in model\u003c\/li\u003e\n\u003cli\u003eNeeds an optional setting ring or Inside Micro Checker for setting (141-121)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165606678641,"sku":"141-121","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-inside-micrometers-default-title-mitutoyo-141-121-interchangeable-rod-inside-micrometer-8-20-graduation-001-25387038736497.jpg?v=1761753663"},{"product_id":"mitutoyo-468-976-digital-3-point-internal-micrometer-set-0-275-0-5-interchange-head-ip65-tin","title":"Mitutoyo 468-976 | Digital Holtest 3-Point Bore Micrometer Set | 0.275–0.5 in (6.985–12.7 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-976 is a Series 468 digital three-point internal micrometer set covering .275-.5\", with interchangeable heads, IP65 protection and TiN-coated contacts. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 468-976\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCall +966 531 321586\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eWorkshops that measure many bore sizes need a separate bore micrometer for every range, and that multiplies cost and storage. The Mitutoyo 468-976 set covers .275-.5\" using interchangeable heads on one digital body.\u003c\/p\u003e\n\u003cp\u003eEach head uses the three-point, self-centring principle, so readings reflect the true inside diameter. TiN-coated contact points add durability, and IP65 protection means the set can be used where coolant and dust are present. It is genuine Mitutoyo, supplied through an authorised distributor.\u003c\/p\u003e\n\u003cp\u003eTypical uses include workshops measuring many different bore sizes; maintenance teams needing one kit for multiple ranges; and quality labs standardising on Mitutoyo bore gauging. Swapping heads is quick, so one operator can move between bore sizes without changing instruments, while keeping the same display, data output and familiar handling.\u003c\/p\u003e\n\u003cp\u003eFor the best accuracy, keep the head square to the bore axis, measure at more than one depth to check for taper or ovality, and let the part and instrument reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003eEach head must be set against a known diameter using a setting ring. Tell our team which bore sizes you measure most often and we will confirm what is included and which rings you need. Our team can also arrange calibration.\u003c\/p\u003e\n\u003cp\u003eComparing options? See the Mitutoyo 468-977 (.5-.8\") before you order.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers .275-.5\" with one set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterchangeable heads on one digital body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP65 protection for shop-floor use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiN-coated contacts for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-centring three-point accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo from an authorised distributor in Saudi Arabia\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWorkshops measuring many different bore sizes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams needing one kit for multiple ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuality labs standardising on Mitutoyo bore gauging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Specify \u0026amp; Install It\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eFit the head for the bore size you need.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSet the origin with the matching setting ring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the head squarely and apply the constant-force device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead or output the value, then clean and return the head to its case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat range does this set cover?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-976 covers .275-.5\", using interchangeable heads.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for coolant areas?\u003c\/h3\u003e\n\u003cp\u003eYes, the listing states IP65 protection.\u003c\/p\u003e\n\u003ch3\u003eWhy choose a set instead of individual bore micrometers?\u003c\/h3\u003e\n\u003cp\u003eOne set with interchangeable heads covers a wide range and can reduce the need for separate instruments and storage space for every size.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 468-976 or the 468-977?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-977 covers .5-.8\". Match the range and features to your parts; our team can help you decide.\u003c\/p\u003e\n\u003ch3\u003eHow should I care for the instrument?\u003c\/h3\u003e\n\u003cp\u003eWipe the measuring faces clean after use, store it in its case away from heat, humidity and coolant, and remove the battery if it will be stored for a long time. Regular calibration keeps readings trustworthy.\u003c\/p\u003e\n\u003ch3\u003eCan the instrument be calibrated?\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Saudi provides calibration services for dimensional instruments. Ask our team about calibration when you order.\u003c\/p\u003e\n\u003ch3\u003eCan you supply other Mitutoyo instruments in the same order?\u003c\/h3\u003e\n\u003cp\u003eYes. Our store carries a wide range of Mitutoyo micrometers, bore gauges, calipers and indicators. Tell us what you need and we will quote them together.\u003c\/p\u003e\n\u003ch3\u003eIs genuine Mitutoyo available in Saudi Arabia?\u003c\/h3\u003e\n\u003cp\u003eYes. General Tech is an authorised Mitutoyo distributor. Call \u003cstrong\u003e+966 531 321586\u003c\/strong\u003e for current pricing, availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing, stock availability and product support.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165620965489,"sku":"468-976","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-976-digital-3-point-internal-micrometer-set-0-275-0-5-interchange-head-ip65-tin-25387104895089.png?v=1761753318"},{"product_id":"mitutoyo-468-977-digital-3-point-internal-micrometer-set-0-5-0-8-interchange-head-ip65-tin","title":"Mitutoyo 468-977 | Digital Holtest 3-Point Bore Micrometer Set | 0.5–0.8 in (12.7–20.32 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-977 is a Series 468 digital three-point internal micrometer set covering .5-.8\", with interchangeable heads, IP65 protection and TiN-coated contacts. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 468-977\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCall +966 531 321586\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eWorkshops that measure many bore sizes need a separate bore micrometer for every range, and that multiplies cost and storage. The Mitutoyo 468-977 set covers .5-.8\" using interchangeable heads on one digital body.\u003c\/p\u003e\n\u003cp\u003eEach head uses the three-point, self-centring principle, so readings reflect the true inside diameter. TiN-coated contact points add durability, and IP65 protection means the set can be used where coolant and dust are present. It is genuine Mitutoyo, supplied through an authorised distributor.\u003c\/p\u003e\n\u003cp\u003eTypical uses include workshops measuring many different bore sizes; maintenance teams needing one kit for multiple ranges; and quality labs standardising on Mitutoyo bore gauging. Swapping heads is quick, so one operator can move between bore sizes without changing instruments, while keeping the same display, data output and familiar handling.\u003c\/p\u003e\n\u003cp\u003eFor the best accuracy, keep the head square to the bore axis, measure at more than one depth to check for taper or ovality, and let the part and instrument reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003eEach head must be set against a known diameter using a setting ring. Tell our team which bore sizes you measure most often and we will confirm what is included and which rings you need. Our team can also arrange calibration.\u003c\/p\u003e\n\u003cp\u003eComparing options? See the Mitutoyo 468-978 (.8-2\") before you order.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers .5-.8\" with one set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterchangeable heads on one digital body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP65 protection for shop-floor use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiN-coated contacts for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-centring three-point accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo from an authorised distributor in Saudi Arabia\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWorkshops measuring many different bore sizes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams needing one kit for multiple ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuality labs standardising on Mitutoyo bore gauging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Specify \u0026amp; Install It\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eFit the head for the bore size you need.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSet the origin with the matching setting ring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the head squarely and apply the constant-force device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead or output the value, then clean and return the head to its case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat range does this set cover?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-977 covers .5-.8\", using interchangeable heads.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for coolant areas?\u003c\/h3\u003e\n\u003cp\u003eYes, the listing states IP65 protection.\u003c\/p\u003e\n\u003ch3\u003eWhy choose a set instead of individual bore micrometers?\u003c\/h3\u003e\n\u003cp\u003eOne set with interchangeable heads covers a wide range and can reduce the need for separate instruments and storage space for every size.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 468-977 or the 468-978?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-978 covers .8-2\". Match the range and features to your parts; our team can help you decide.\u003c\/p\u003e\n\u003ch3\u003eHow should I care for the instrument?\u003c\/h3\u003e\n\u003cp\u003eWipe the measuring faces clean after use, store it in its case away from heat, humidity and coolant, and remove the battery if it will be stored for a long time. Regular calibration keeps readings trustworthy.\u003c\/p\u003e\n\u003ch3\u003eCan the instrument be calibrated?\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Saudi provides calibration services for dimensional instruments. Ask our team about calibration when you order.\u003c\/p\u003e\n\u003ch3\u003eCan you supply other Mitutoyo instruments in the same order?\u003c\/h3\u003e\n\u003cp\u003eYes. Our store carries a wide range of Mitutoyo micrometers, bore gauges, calipers and indicators. Tell us what you need and we will quote them together.\u003c\/p\u003e\n\u003ch3\u003eIs genuine Mitutoyo available in Saudi Arabia?\u003c\/h3\u003e\n\u003cp\u003eYes. General Tech is an authorised Mitutoyo distributor. Call \u003cstrong\u003e+966 531 321586\u003c\/strong\u003e for current pricing, availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing, stock availability and product support.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165620998257,"sku":"468-977","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-977-digital-3-point-internal-micrometer-set-0-5-0-8-interchange-head-ip65-tin-25387104993393.png?v=1761753317"},{"product_id":"mitutoyo-468-978-digital-3-point-internal-micrometer-set-0-8-2-interchange-head-ip65-tin","title":"Mitutoyo 468-978 | Digital Holtest 3-Point Bore Micrometer Set | 0.8–2 in (20.32–50.8 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-978 is a Series 468 digital three-point internal micrometer set covering .8-2\", with interchangeable heads, IP65 protection and TiN-coated contacts. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 468-978\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCall +966 531 321586\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eWorkshops that measure many bore sizes need a separate bore micrometer for every range, and that multiplies cost and storage. The Mitutoyo 468-978 set covers .8-2\" using interchangeable heads on one digital body.\u003c\/p\u003e\n\u003cp\u003eEach head uses the three-point, self-centring principle, so readings reflect the true inside diameter. TiN-coated contact points add durability, and IP65 protection means the set can be used where coolant and dust are present. It is genuine Mitutoyo, supplied through an authorised distributor.\u003c\/p\u003e\n\u003cp\u003eTypical uses include workshops measuring many different bore sizes; maintenance teams needing one kit for multiple ranges; and quality labs standardising on Mitutoyo bore gauging. Swapping heads is quick, so one operator can move between bore sizes without changing instruments, while keeping the same display, data output and familiar handling.\u003c\/p\u003e\n\u003cp\u003eFor the best accuracy, keep the head square to the bore axis, measure at more than one depth to check for taper or ovality, and let the part and instrument reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003eEach head must be set against a known diameter using a setting ring. Tell our team which bore sizes you measure most often and we will confirm what is included and which rings you need. Our team can also arrange calibration.\u003c\/p\u003e\n\u003cp\u003eComparing options? See the Mitutoyo 468-979 (2-4\") before you order.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers .8-2\" with one set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterchangeable heads on one digital body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP65 protection for shop-floor use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiN-coated contacts for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSelf-centring three-point accuracy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo from an authorised distributor in Saudi Arabia\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWorkshops measuring many different bore sizes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams needing one kit for multiple ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuality labs standardising on Mitutoyo bore gauging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Specify \u0026amp; Install It\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eFit the head for the bore size you need.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSet the origin with the matching setting ring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the head squarely and apply the constant-force device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead or output the value, then clean and return the head to its case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eWhat range does this set cover?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-978 covers .8-2\", using interchangeable heads.\u003c\/p\u003e\n\u003ch3\u003eIs it suitable for coolant areas?\u003c\/h3\u003e\n\u003cp\u003eYes, the listing states IP65 protection.\u003c\/p\u003e\n\u003ch3\u003eWhy choose a set instead of individual bore micrometers?\u003c\/h3\u003e\n\u003cp\u003eOne set with interchangeable heads covers a wide range and can reduce the need for separate instruments and storage space for every size.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the 468-978 or the 468-979?\u003c\/h3\u003e\n\u003cp\u003eThe Mitutoyo 468-979 covers 2-4\". Match the range and features to your parts; our team can help you decide.\u003c\/p\u003e\n\u003ch3\u003eHow should I care for the instrument?\u003c\/h3\u003e\n\u003cp\u003eWipe the measuring faces clean after use, store it in its case away from heat, humidity and coolant, and remove the battery if it will be stored for a long time. Regular calibration keeps readings trustworthy.\u003c\/p\u003e\n\u003ch3\u003eCan the instrument be calibrated?\u003c\/h3\u003e\n\u003cp\u003eGeneral Tech Saudi provides calibration services for dimensional instruments. Ask our team about calibration when you order.\u003c\/p\u003e\n\u003ch3\u003eCan you supply other Mitutoyo instruments in the same order?\u003c\/h3\u003e\n\u003cp\u003eYes. Our store carries a wide range of Mitutoyo micrometers, bore gauges, calipers and indicators. Tell us what you need and we will quote them together.\u003c\/p\u003e\n\u003ch3\u003eIs genuine Mitutoyo available in Saudi Arabia?\u003c\/h3\u003e\n\u003cp\u003eYes. General Tech is an authorised Mitutoyo distributor. Call \u003cstrong\u003e+966 531 321586\u003c\/strong\u003e for current pricing, availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing, stock availability and product support.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621031025,"sku":"468-978","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-978-digital-3-point-internal-micrometer-set-0-8-2-interchange-head-ip65-tin-25387105484913.png?v=1761753317"},{"product_id":"mitutoyo-468-979-digital-3-point-internal-micrometer-set-2-4-interchange-head-ip65-tin","title":"Mitutoyo 468-979 | Digital Holtest 3-Point Bore Micrometer Set | 2–4 in (50.8–101.6 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-979 is a Series 468 digital three-point internal micrometer set covering 2-4\", with interchangeable heads, IP65 protection and TiN-coated contacts. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 468-979\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eWorkshops that measure many different bore sizes often need a separate bore micrometer for each range, increasing equipment cost and storage requirements. The Mitutoyo 468-979 set covers 2-4\" using interchangeable heads on one digital body.\u003c\/p\u003e\n\u003cp\u003eEach head uses the three-point, self-centring measuring principle, allowing the contacts to locate against the bore and provide an inside-diameter reading. TiN-coated contact points provide durability, while IP65 protection makes the set suitable for environments where coolant and dust may be present. It is genuine Mitutoyo, supplied through an authorised distributor.\u003c\/p\u003e\n\u003cp\u003eTypical applications include workshops measuring many different bore sizes, maintenance teams needing one kit for multiple ranges, and quality laboratories standardising on Mitutoyo bore gauging. Interchangeable heads allow an operator to move between bore sizes without changing the complete instrument, while using the same display, data output and familiar handling.\u003c\/p\u003e\n\u003cp\u003eFor best accuracy, keep the measuring head square to the bore axis, measure at more than one depth to check for taper or ovality, and allow the workpiece and instrument to reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003eEach head must be set against a known diameter using an appropriate setting ring. Tell our team which bore sizes you measure most frequently and we can confirm the included heads and recommend the required setting rings. General Tech can also arrange calibration.\u003c\/p\u003e\n\u003cp\u003eComparing options? See the Mitutoyo 468-980, which covers 4-8\".\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers 2-4\" with one interchangeable-head set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterchangeable heads on one digital body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThree-point self-centring measuring principle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP65 protection for suitable shop-floor environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiN-coated contact points for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne digital body for multiple bore ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo from an authorised distributor in Saudi Arabia\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWorkshops measuring many different bore sizes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams needing one kit for multiple ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuality laboratories standardising on Mitutoyo bore gauging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInspection teams requiring interchangeable measuring heads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect and fit the appropriate interchangeable head for the bore size.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSet the origin using the matching setting ring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the head squarely into the bore and apply the constant-force device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the measurement on the digital display or transfer the value through the data output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring surfaces and return the head to its case after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 468-979 set cover?\u003c\/strong\u003e\u003cbr\u003eThe Mitutoyo 468-979 covers 2-4\" using interchangeable measuring heads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the interchangeable-head system work?\u003c\/strong\u003e\u003cbr\u003eDifferent heads can be fitted to the same digital body to measure different bore sizes, allowing one instrument set to cover multiple ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Mitutoyo 468-979 suitable for coolant areas?\u003c\/strong\u003e\u003cbr\u003eThe listing specifies IP65 protection, making the set suitable for appropriate shop-floor environments where dust and coolant may be present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a set instead of individual bore micrometers?\u003c\/strong\u003e\u003cbr\u003eAn interchangeable-head set can cover multiple bore ranges while using one digital body, helping reduce the number of separate instruments required and simplifying storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 468-979 or the 468-980?\u003c\/strong\u003e\u003cbr\u003eThe 468-979 covers 2-4\", while the 468-980 covers 4-8\". Select the set according to the bore sizes you need to measure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need setting rings for the interchangeable heads?\u003c\/strong\u003e\u003cbr\u003eYes. Each head must be set against a known diameter using the appropriate setting ring. Contact our team to confirm the required rings for your measuring ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I care for the instrument?\u003c\/strong\u003e\u003cbr\u003eWipe the measuring faces clean after use and store the set in its case away from excessive heat, humidity and coolant. Remove the battery if the instrument will be stored for an extended period. Regular calibration helps maintain reliable measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the instrument be calibrated?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech Saudi provides calibration services for dimensional measuring instruments. Ask our team about calibration when you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you supply other Mitutoyo instruments in the same order?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech can supply a wide range of Mitutoyo micrometers, bore gauges, calipers and indicators. Contact the team for a combined quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Mitutoyo available in Saudi Arabia?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech is an authorised Mitutoyo distributor. Contact the team for current pricing, availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing, availability and quotation.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621063793,"sku":"468-979","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-979-digital-3-point-internal-micrometer-set-2-4-interchange-head-ip65-tin-25387106107505.png?v=1761753315"},{"product_id":"mitutoyo-468-980-digital-3-point-internal-micrometer-set-4-8-interchange-head-ip65-tin","title":"Mitutoyo 468-980 | Digital Holtest 3-Point Bore Micrometer Set | 4–8 in (101.6–203.2 mm), IP65","description":"\u003cp\u003eThe Mitutoyo 468-980 is a Series 468 digital three-point internal micrometer set covering 4-8\", with interchangeable heads, IP65 protection and TiN-coated contacts. Genuine Mitutoyo from General Tech, authorised distributor in Saudi Arabia. Request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 468-980\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eWorkshops that measure many different bore sizes often need separate bore micrometers for each measuring range, increasing equipment cost and storage requirements. The Mitutoyo 468-980 solves this by providing a 4-8\" measuring range through interchangeable heads mounted on one digital body.\u003c\/p\u003e\n\u003cp\u003eEach head uses the three-point, self-centring measuring principle, allowing the contacts to locate against the bore and provide an inside-diameter reading. TiN-coated contact points provide durability, while IP65 protection makes the set suitable for environments where coolant and dust may be present. It is genuine Mitutoyo, supplied through an authorised distributor.\u003c\/p\u003e\n\u003cp\u003eTypical applications include workshops measuring a wide range of bore sizes, maintenance teams needing one kit for multiple measuring ranges, and quality laboratories standardising on Mitutoyo bore gauging. Interchangeable heads allow an operator to move between bore sizes while using the same digital body, display, data output and familiar handling.\u003c\/p\u003e\n\u003cp\u003eFor best accuracy, keep the measuring head square to the bore axis, measure at more than one depth to check for taper or ovality, and allow the workpiece and instrument to reach the same temperature before measuring.\u003c\/p\u003e\n\u003cp\u003eEach head must be set against a known diameter using an appropriate setting ring. Tell our team which bore sizes you measure most frequently and we can confirm the included heads and recommend the required setting rings. General Tech can also arrange calibration.\u003c\/p\u003e\n\u003cp\u003eComparing options? See the Mitutoyo 468-979, which covers 2-4\".\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eCovers 4-8\" with one interchangeable-head set\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInterchangeable heads on one digital body\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThree-point self-centring measuring principle\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIP65 protection for suitable shop-floor environments\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiN-coated contact points for durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOne display and body for multiple bore ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGenuine Mitutoyo from an authorised distributor in Saudi Arabia\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing and stock availability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWho This Product Is Best For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWorkshops measuring many different bore sizes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaintenance teams needing one kit for multiple bore ranges\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eQuality laboratories standardising on Mitutoyo bore gauging\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInspection teams requiring interchangeable measuring heads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Specify \u0026amp; Install It\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect and fit the appropriate interchangeable head for the bore size.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSet the origin using the matching setting ring.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the head squarely into the bore and apply the constant-force device.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the measurement on the digital display or transfer the value through the data output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClean the measuring surfaces and return the head to its case after use.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 468-980 set cover?\u003c\/strong\u003e\u003cbr\u003eThe Mitutoyo 468-980 covers 4-8\" using interchangeable measuring heads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does the interchangeable-head system work?\u003c\/strong\u003e\u003cbr\u003eDifferent heads can be fitted to the same digital body to measure different bore sizes, allowing one instrument set to cover multiple ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Mitutoyo 468-980 suitable for coolant areas?\u003c\/strong\u003e\u003cbr\u003eThe listing specifies IP65 protection, making the set suitable for appropriate shop-floor environments where dust and coolant may be present.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose a set instead of individual bore micrometers?\u003c\/strong\u003e\u003cbr\u003eAn interchangeable-head set can cover multiple bore ranges while using one digital body, helping reduce the number of separate instruments required and simplifying storage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose the 468-980 or the 468-979?\u003c\/strong\u003e\u003cbr\u003eThe 468-980 covers 4-8\", while the 468-979 covers 2-4\". Select the set according to the bore sizes you need to measure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need setting rings for the interchangeable heads?\u003c\/strong\u003e\u003cbr\u003eYes. Each head must be set against a known diameter using the appropriate setting ring. Contact our team to confirm the required rings for your measuring ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow should I care for the instrument?\u003c\/strong\u003e\u003cbr\u003eWipe the measuring faces clean after use and store the set in its case away from excessive heat, humidity and coolant. Remove the battery if the instrument will be stored for an extended period. Regular calibration helps maintain reliable measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the instrument be calibrated?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech Saudi provides calibration services for dimensional measuring instruments. Ask our team about calibration when you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you supply other Mitutoyo instruments in the same order?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech can supply a wide range of Mitutoyo micrometers, bore gauges, calipers and indicators. Contact the team for a combined quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs genuine Mitutoyo available in Saudi Arabia?\u003c\/strong\u003e\u003cbr\u003eYes. General Tech is an authorised Mitutoyo distributor. Contact the team for current pricing, availability and lead time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCall +966 531 321586 for pricing, availability and quotation.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42165621096561,"sku":"468-980","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-holtest-complete-unit-sets-default-title-mitutoyo-468-980-digital-3-point-internal-micrometer-set-4-8-interchange-head-ip65-tin-25387106205809.png?v=1761753314"},{"product_id":"mitutoyo-103-914-50-outside-micrometer-set-ratchet-stop-0-300mm-range-0-01mm-graduation-12-piece-set","title":"Mitutoyo 103-914-50 | Outside Micrometer Set | 0-300 mm, 0.01 mm, 12 pieces","description":"\u003cp\u003eThe Mitutoyo 103-914-50 is a 12-piece outside micrometer set covering 0-300 mm in 25 mm steps, each micrometer graduated in 0.01 mm. It contains the micrometers of sets 103-913-50 and 103-915-10 (0-25 mm up to 275-300 mm) plus 11 setting standards, all with ratchet stops for constant measuring force and repeatable readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 micrometers covering 0-300 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eAccuracy ±2 µm up to 75 mm, ±3 µm to 150 mm, ±4 µm to 225 mm, ±5 µm to 300 mm\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped faces: flatness 0.6 µm, parallelism (2+R\/100) µm\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-914-50\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-914-50 set weight 9300 g\u003c\/li\u003e\n\u003cli\u003e103-914-50 is delivered in a box with 11 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129711217,"sku":"103-914-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-914-50-outside-micrometer-set-ratchet-stop-0-300mm-range-0-01mm-graduation-12-piece-set-25381751259249.jpg?v=1761752343"},{"product_id":"mitutoyo-103-927-10-outside-micrometer-set-ratchet-stop-0-75mm-range-0-01mm-graduation-3-piece-set","title":"Mitutoyo 103-927-10 | Outside Micrometer Set | 0-75 mm, 0.01 mm, 3 pieces","description":"\u003cp\u003eMitutoyo set 103-927-10 groups 3 mechanical outside micrometers for 0-75 mm, each reading to 0.01 mm. The kit holds 103-137, 103-138 and 103-139-10 (0-25, 25-50 and 50-75 mm) together with 2 setting standards, and every micrometer uses a ratchet stop for consistent readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 micrometers covering 0-75 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 3 micrometers of the 103-927-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-927-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-927-10 set weight 750 g\u003c\/li\u003e\n\u003cli\u003e103-927-10 is delivered in a box with 2 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129776753,"sku":"103-927-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-927-10-outside-micrometer-set-ratchet-stop-0-75mm-range-0-01mm-graduation-3-piece-set-25381751783537.png?v=1761752347"},{"product_id":"mitutoyo-103-913-50-outside-micrometer-set-ratchet-stop-0-150mm-range-0-01mm-graduation-6-piece-set","title":"Mitutoyo 103-913-50 | Outside Micrometer Set | 0-150 mm, 0.01 mm, 6 pieces","description":"\u003cp\u003eCovering 0-150 mm with 6 outside micrometers, the Mitutoyo 103-913-50 set reads to 0.01 mm on each instrument. You get 103-137, 103-138 and 103-139-10 to 103-142-10 (0-25 mm up to 125-150 mm) and 5 setting standards, with ratchet stops fitted throughout for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 0-150 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-913-50\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-913-50\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-913-50 set weight 2260 g\u003c\/li\u003e\n\u003cli\u003e103-913-50 is delivered in a box with 5 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129809521,"sku":"103-913-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-913-50-outside-micrometer-set-ratchet-stop-0-150mm-range-0-01mm-graduation-6-piece-set-25381752209521.png?v=1761752343"},{"product_id":"mitutoyo-103-915-10-outside-micrometer-set-ratchet-stop-150-300mm-range-0-01mm-graduation-6-piece-set","title":"Mitutoyo 103-915-10 | Outside Micrometer Set | 150-300 mm, 0.01 mm, 6 pieces","description":"\u003cp\u003eWith 6 outside micrometers spanning 150-300 mm, set 103-915-10 gives a 0.01 mm graduation across every 25 mm band. Included are 103-143-10 to 103-148-10 (150-175 mm up to 275-300 mm) and 6 setting standards, while a ratchet stop on each of the 6 micrometers keeps the measuring force constant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 150-300 mm, 0.01 mm graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-915-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock, 0.5 mm pitch on set 103-915-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-915-10 set weight 7695 g\u003c\/li\u003e\n\u003cli\u003e103-915-10 is delivered in a box with 6 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170129907825,"sku":"103-915-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-915-10-outside-micrometer-set-ratchet-stop-150-300mm-range-0-01mm-graduation-6-piece-set-25381752602737.png?v=1761752343"},{"product_id":"mitutoyo-103-929-outside-micrometer-set-ratchet-stop-0-3-range-0-001-graduation-3-piece-set","title":"Mitutoyo 103-929 | Outside Micrometer Set | 0-3 in, 0.001 in, 3 pieces","description":"\u003cp\u003eCovering 0-3 in with 3 outside micrometers, the Mitutoyo 103-929 set reads to 0.001 in on each instrument. You get 103-177, 103-178 and 103-179 (0-1, 1-2 and 2-3 in) and 2 setting standards, with ratchet stops fitted throughout for constant measuring force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 micrometers covering 0-3 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 3 micrometers of the 103-929\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-929\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-929 set weight 750 g\u003c\/li\u003e\n\u003cli\u003e103-929 is delivered in a box with 2 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130006129,"sku":"103-929","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-929-outside-micrometer-set-ratchet-stop-0-3-range-0-001-graduation-3-piece-set-25381752897649.png?v=1761752342"},{"product_id":"mitutoyo-103-904-10-outside-micrometer-set-ratchet-stop-0-6-inch-range-0-001-graduation-6-piece-set","title":"Mitutoyo 103-904-10 | Outside Micrometer Set | 0-6 in, 0.001 in, 6 pieces","description":"\u003cp\u003eThe Mitutoyo 103-904-10 is a 6-piece outside micrometer set covering 0-6 in in 1 in steps, each micrometer graduated in 0.001 in. It contains 103-177 to 103-182 (0-1 in up to 5-6 in) plus 5 setting standards, all with ratchet stops for constant measuring force and repeatable readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 0-6 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-904-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-904-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-904-10 set weight 2200 g\u003c\/li\u003e\n\u003cli\u003e103-904-10 is delivered in a box with 5 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130038897,"sku":"103-904-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-904-10-outside-micrometer-set-ratchet-stop-0-6-inch-range-0-001-graduation-6-piece-set-25381752930417.png?v=1761752341"},{"product_id":"mitutoyo-103-906-outside-micrometer-set-ratchet-stop-6-12-range-0-001-graduation-6-piece-set","title":"Mitutoyo 103-906 | Outside Micrometer Set | 6-12 in, 0.001 in, 6 pieces","description":"\u003cp\u003eMitutoyo set 103-906 groups 6 mechanical outside micrometers for 6-12 in, each reading to 0.001 in. The kit holds 103-183 to 103-188 (6-7 in up to 11-12 in) together with 6 setting standards, and every micrometer uses a ratchet stop for consistent readings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 micrometers covering 6-12 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 6 micrometers of the 103-906\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-906\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-906 set weight 7695 g\u003c\/li\u003e\n\u003cli\u003e103-906 is delivered in a box with 6 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130104433,"sku":"103-906","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-906-outside-micrometer-set-ratchet-stop-6-12-range-0-001-graduation-6-piece-set-25381752995953.png?v=1761752340"},{"product_id":"mitutoyo-103-905-10-outside-micrometer-set-ratchet-stop-0-12-range-0-001-graduation-12-piece-set","title":"Mitutoyo 103-905-10 | Outside Micrometer Set | 0-12 in, 0.001 in, 12 pieces","description":"\u003cp\u003eWith 12 outside micrometers spanning 0-12 in, set 103-905-10 gives a 0.001 in graduation across every 1 in band. Included are the micrometers of sets 103-904-10 and 103-906 (0-1 in up to 11-12 in) and 11 setting standards, while a ratchet stop on each of the 12 micrometers keeps the measuring force constant.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 micrometers covering 0-12 in, 0.001 in graduation\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped, micro-lapped measuring faces on all 12 micrometers of the 103-905-10\u003c\/li\u003e\n\u003cli\u003eø6.35 mm spindle with spindle lock on set 103-905-10\u003c\/li\u003e\n\u003cli\u003eBaked-enamel frames; 103-905-10 set weight 9000 g\u003c\/li\u003e\n\u003cli\u003e103-905-10 is delivered in a box with 11 setting standards and a key\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170130169969,"sku":"103-905-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-mechanical-outside-micrometer-sets-default-title-mitutoyo-103-905-10-outside-micrometer-set-ratchet-stop-0-12-range-0-001-graduation-12-piece-set-25381753028721.png?v=1761752339"},{"product_id":"gagemaker-cl-1001-camlock-micrometer-range-0-1-0-25-4-mm","title":"Gagemaker CL-1001 | CamLock Micrometer | Range 0 - 1\" (0 - 25.4 mm)","description":"\u003cp\u003eCovering 0 - 1\" (0 - 25.4 mm), the Gagemaker CL-1001 CamLock micrometer measures API weld flange thickness. A verification standard is supplied with it, and replacement standards are sold separately. Choose the CL-1001 when the flange thickness to be measured falls within 0 - 1\".\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange: 0 - 1\" (0 - 25.4 mm)\u003c\/li\u003e\n\u003cli\u003eMeasures API weld flange thickness\u003c\/li\u003e\n\u003cli\u003eVerification standard included with each CL-1001\u003c\/li\u003e\n\u003cli\u003eReplacement standards available separately from Gagemaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206486641,"sku":"Gagemaker CL-1001","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1001-camlock-micrometer-range-0-1-0-25-4-mm-25381954060401.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1002-camlock-micrometer-range-1-2-25-4-50-8-mm","title":"Gagemaker CL-1002 | CamLock Micrometer | Range 1\" - 2\" (25.4 - 50.8 mm)","description":"\u003cp\u003eThe Gagemaker CL-1002 is the 1\" - 2\" CamLock micrometer (25.4 - 50.8 mm) for measuring the thickness of API weld flanges. It ships with a verification standard; replacement standards are available as separate items.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasuring range 25.4 - 50.8 mm \/ 1\" - 2\"\u003c\/li\u003e\n\u003cli\u003eBuilt to check API weld flange thickness at 1\" - 2\"\u003c\/li\u003e\n\u003cli\u003eSupplied with a verification standard for the CL-1002\u003c\/li\u003e\n\u003cli\u003eSpare standards sold on their own\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206519409,"sku":"Gagemaker CL-1002","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1002-camlock-micrometer-range-1-2-25-4-50-8-mm-25381954125937.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1003-camlock-micrometer-range-2-3-50-8-76-2-mm","title":"Gagemaker CL-1003 | CamLock Micrometer | Range 2\" - 3\" (50.8 - 76.2 mm)","description":"\u003cp\u003eFor API weld flange thickness in the 2\" - 3\" band, Gagemaker offers the CL-1003 CamLock micrometer, metric equivalent 50.8 - 76.2 mm. Each unit comes with its own verification standard, and replacement standards are offered separately should it need replacing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCovers 2\" - 3\", or 50.8 - 76.2 mm\u003c\/li\u003e\n\u003cli\u003eAPI weld flange thickness measurement with the CL-1003\u003c\/li\u003e\n\u003cli\u003eVerification standard in the box\u003c\/li\u003e\n\u003cli\u003eReplacement standards for the CL-1003 can be bought separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206552177,"sku":"Gagemaker CL-1003","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1003-camlock-micrometer-range-2-3-50-8-76-2-mm-25381954289777.jpg?v=1761751596"},{"product_id":"gagemaker-cl-1004-camlock-micrometer-range-3-4-76-2-101-6-mm","title":"Gagemaker CL-1004 | CamLock Micrometer | Range 3\" - 4\" (76.2 - 101.6 mm)","description":"\u003cp\u003eThe CL-1004 is Gagemaker's CamLock micrometer for the 3\" - 4\" range (76.2 - 101.6 mm), used to measure API weld flange thickness. It is supplied together with a verification standard. If that standard ever needs replacing, replacement standards are available as separate items.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\" - 4\" range (76.2 - 101.6 mm)\u003c\/li\u003e\n\u003cli\u003eFor API weld flange thickness\u003c\/li\u003e\n\u003cli\u003eComes with a verification standard sized for 3\" - 4\"\u003c\/li\u003e\n\u003cli\u003eFurther standards for the CL-1004 are offered separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206584945,"sku":"Gagemaker CL-1004","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-camlock-micrometers-default-title-gagemaker-cl-1004-camlock-micrometer-range-3-4-76-2-101-6-mm-25381954355313.jpg?v=1761751595"},{"product_id":"gagemaker-mt-3012-50-mic-trac-12-base-unit-with-dro","title":"Gagemaker MT-3012-50 | MIC TRAC 12\" Base Unit with DRO | ±.0001\" Accuracy, 0\" – 12\" Internal","description":"\u003cp\u003eGagemaker MT-3012-50 is a 12\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0001\" accuracy at .00005\" resolution. It measures internally from 0\" – 12\" (0 mm – 304.8 mm) and externally from 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012-50 internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3012-50\u003c\/li\u003e\n\u003cli\u003eMT-3012-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206617713,"sku":"MT-3012-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012-50-mic-trac-12-base-unit-with-dro-25381954420849.jpg?v=1761751595"},{"product_id":"gagemaker-mt-3024-50-mic-trac-24-base-unit-with-dro","title":"Gagemaker MT-3024-50 | MIC TRAC 24\" Base Unit with DRO | ±.0002\" Accuracy, 0\" – 24\" Internal","description":"\u003cp\u003eGagemaker MT-3024-50 is a 24\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0002\" accuracy at .00005\" resolution. It measures internally from 0\" – 24\" (0 mm – 609.6 mm) and externally from 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024-50 internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3024-50\u003c\/li\u003e\n\u003cli\u003eMT-3024-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206683249,"sku":"MT-3024-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024-50-mic-trac-24-base-unit-with-dro-25381954584689.jpg?v=1761751594"},{"product_id":"gagemaker-mt-3036-50-mic-trac-36-base-unit-with-dro","title":"Gagemaker MT-3036-50 | MIC TRAC 36\" Base Unit with DRO | ±.0003\" Accuracy, 0\" – 36\" Internal","description":"\u003cp\u003eGagemaker MT-3036-50 is a 36\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0003\" accuracy at .00005\" resolution. It measures internally from 0\" – 36\" (0 mm – 914.4 mm) and externally from 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036-50 internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3036-50\u003c\/li\u003e\n\u003cli\u003eMT-3036-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206716017,"sku":"MT-3036-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036-50-mic-trac-36-base-unit-with-dro-25381954682993.jpg?v=1761751594"},{"product_id":"gagemaker-mt-3048-50-mic-trac-48-base-unit-with-dro","title":"Gagemaker MT-3048-50 | MIC TRAC 48\" Base Unit with DRO | ±.0004\" Accuracy, 0\" – 48\" Internal","description":"\u003cp\u003eGagemaker MT-3048-50 is a 48\" MIC TRAC™ gage setting and part measurement system without Force-Lok, rated ±.0004\" accuracy at .00005\" resolution. It measures internally from 0\" – 48\" (0 mm – 1219.2 mm) and externally from 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm), and is supplied with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048-50 internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048-50)\u003c\/li\u003e\n\u003cli\u003eBase unit without Force-Lok, digital readout (DRO): MT-3048-50\u003c\/li\u003e\n\u003cli\u003eMT-3048-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206781553,"sku":"MT-3048-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048-50-mic-trac-48-base-unit-with-dro-25381954748529.jpg?v=1761751593"},{"product_id":"gagemaker-mt-3012f-50-mic-trac-12-force-lok-unit-with-dro","title":"Gagemaker MT-3012F-50 | MIC TRAC 12\" Force-Lok Unit with DRO | ±.0001\" Accuracy, 0\" – 12\" Internal","description":"\u003cp\u003eWith a 0\" – 12\" internal range and 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm) external range, the MT-3012F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3012F-50 is specified at ±.0001\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012F-50 internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3012F-50\u003c\/li\u003e\n\u003cli\u003eMT-3012F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206847089,"sku":"MT-3012F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012f-50-mic-trac-12-force-lok-unit-with-dro-25381954912369.jpg?v=1761751593"},{"product_id":"gagemaker-mt-3024f-50-mic-trac-24-force-lok-unit-with-dro","title":"Gagemaker MT-3024F-50 | MIC TRAC 24\" Force-Lok Unit with DRO | ±.0002\" Accuracy, 0\" – 24\" Internal","description":"\u003cp\u003eWith a 0\" – 24\" internal range and 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm) external range, the MT-3024F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3024F-50 is specified at ±.0002\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024F-50 internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3024F-50\u003c\/li\u003e\n\u003cli\u003eMT-3024F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206879857,"sku":"MT-3024F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024f-50-mic-trac-24-force-lok-unit-with-dro-25381954977905.jpg?v=1761751592"},{"product_id":"gagemaker-mt-3036f-50-mic-trac-36-force-lok-unit-with-dro","title":"Gagemaker MT-3036F-50 | MIC TRAC 36\" Force-Lok Unit with DRO | ±.0003\" Accuracy, 0\" – 36\" Internal","description":"\u003cp\u003eWith a 0\" – 36\" internal range and 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm) external range, the MT-3036F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3036F-50 is specified at ±.0003\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036F-50 internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3036F-50\u003c\/li\u003e\n\u003cli\u003eMT-3036F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206912625,"sku":"MT-3036F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036f-50-mic-trac-36-force-lok-unit-with-dro-25381955076209.jpg?v=1761751592"},{"product_id":"gagemaker-mt-3048f-50-mic-trac-48-force-lok-unit-with-dro","title":"Gagemaker MT-3048F-50 | MIC TRAC 48\" Force-Lok Unit with DRO | ±.0004\" Accuracy, 0\" – 48\" Internal","description":"\u003cp\u003eWith a 0\" – 48\" internal range and 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm) external range, the MT-3048F-50 is an MT-3000 series MIC TRAC™ unit with Force-Lok. The MT-3048F-50 is specified at ±.0004\" accuracy and .00005\" resolution, and ships with a digital readout (DRO), a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048F-50 internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048F-50)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, digital readout (DRO): MT-3048F-50\u003c\/li\u003e\n\u003cli\u003eMT-3048F-50 supplied with: DRO, TF-PL setting block set, shipping carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170206978161,"sku":"MT-3048F-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048f-50-mic-trac-48-force-lok-unit-with-dro-25381955272817.jpg?v=1761751591"},{"product_id":"gagemaker-mt-3012f-50-usbc-mic-trac-12-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3012F-50-USBC | MIC TRAC 12\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0001\" Accuracy","description":"\u003cp\u003eThe MT-3012F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 12\" internally, at ±.0001\" accuracy. For the MT-3012F-50-USBC the external range is 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3012F-50-USBC internal range 0\" – 12\" (0 mm – 304.8 mm), external range 1-1\/2\" – 13-1\/2\" (38.1 mm – 342.9 mm)\u003c\/li\u003e\n\u003cli\u003e±.0001\" accuracy and .00005\" resolution (MT-3012F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3012F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3012F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207010929,"sku":"MT-3012F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3012f-50-usbc-mic-trac-12-force-lok-unit-with-a-computer-and-mt-4-usb-25381955338353.jpg?v=1761751590"},{"product_id":"gagemaker-mt-3024f-50-usbc-mic-trac-24-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3024F-50-USBC | MIC TRAC 24\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0002\" Accuracy","description":"\u003cp\u003eThe MT-3024F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 24\" internally, at ±.0002\" accuracy. For the MT-3024F-50-USBC the external range is 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3024F-50-USBC internal range 0\" – 24\" (0 mm – 609.6 mm), external range 1-1\/2\" – 25-1\/2\" (38.1 mm – 647.7 mm)\u003c\/li\u003e\n\u003cli\u003e±.0002\" accuracy and .00005\" resolution (MT-3024F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3024F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3024F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207076465,"sku":"MT-3024F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3024f-50-usbc-mic-trac-24-force-lok-unit-with-a-computer-and-mt-4-usb-25381955600497.jpg?v=1761751591"},{"product_id":"gagemaker-mt-3036f-50-usbc-mic-trac-36-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3036F-50-USBC | MIC TRAC 36\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0003\" Accuracy","description":"\u003cp\u003eThe MT-3036F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 36\" internally, at ±.0003\" accuracy. For the MT-3036F-50-USBC the external range is 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3036F-50-USBC internal range 0\" – 36\" (0 mm – 914.4 mm), external range 1-1\/2\" – 37-1\/2\" (38.1 mm – 952.5 mm)\u003c\/li\u003e\n\u003cli\u003e±.0003\" accuracy and .00005\" resolution (MT-3036F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3036F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3036F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207109233,"sku":"MT-3036F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3036f-50-usbc-mic-trac-36-force-lok-unit-with-a-computer-and-mt-4-usb-25381956288625.jpg?v=1761751590"},{"product_id":"gagemaker-mt-3048f-50-usbc-mic-trac-48-force-lok-unit-with-a-computer-and-mt-4-usb","title":"Gagemaker MT-3048F-50-USBC | MIC TRAC 48\" Force-Lok Unit with Computer \u0026 MT-4-USB | ±.0004\" Accuracy","description":"\u003cp\u003eThe MT-3048F-50-USBC MIC TRAC™ with Force-Lok sets gages and measures parts up to 48\" internally, at ±.0004\" accuracy. For the MT-3048F-50-USBC the external range is 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm), resolution is .00005\", and the package includes a computer pre-installed with CERTIFI and TDWin, the MT-4-USB interface device, a TF-PL setting block set and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMT-3048F-50-USBC internal range 0\" – 48\" (0 mm – 1219.2 mm), external range 1-1\/2\" – 49-1\/2\" (38.1 mm – 1257.3 mm)\u003c\/li\u003e\n\u003cli\u003e±.0004\" accuracy and .00005\" resolution (MT-3048F-50-USBC)\u003c\/li\u003e\n\u003cli\u003eForce-Lok, computer with MT-4-USB interface: MT-3048F-50-USBC\u003c\/li\u003e\n\u003cli\u003eMT-3048F-50-USBC supplied with: Computer (CERTIFI, TDWin), MT-4-USB, TF-PL setting blocks, carton\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207142001,"sku":"MT-3048F-50-USBC","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-3048f-50-usbc-mic-trac-48-force-lok-unit-with-a-computer-and-mt-4-usb-25381956386929.jpg?v=1761751589"},{"product_id":"gagemaker-mt-4012-10-mic-trac-4000-base-unit-0-12-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4012-10 | MIC TRAC 4000 Base Unit, 0\" – 12\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eGagemaker MT-4012-10 is the MIC TRAC™ 4000 base unit with a 0\" – 12\" internal range, ±.00005\" accuracy and .00001\" resolution. The MT-4012-10 comes with a computer running digital readout software with extended functions, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4012-10: 0\" – 12\" (0 mm – 304.8 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4012-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4012-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4012-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207174769,"sku":"MT-4012-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4012-10-mic-trac-4000-base-unit-0-12-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381956780145.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4024-10-mic-trac-4000-base-unit-0-24-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4024-10 | MIC TRAC 4000 Base Unit, 0\" – 24\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eCovering internal measurements from 0\" to 24\", the MT-4024-10 MIC TRAC™ 4000 base unit is specified at ±.00005\" accuracy with .00001\" resolution. Supplied with the MT-4024-10: a computer, extended-function digital readout software, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4024-10: 0\" – 24\" (0 mm – 609.6 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4024-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4024-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4024-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207240305,"sku":"MT-4024-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4024-10-mic-trac-4000-base-unit-0-24-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381956943985.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4036-10-mic-trac-4000-base-unit-0-36-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4036-10 | MIC TRAC 4000 Base Unit, 0\" – 36\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eThe MIC TRAC™ 4000 MT-4036-10 handles 0\" – 36\" internal work at .00001\" resolution and ±.00005\" accuracy. In the MT-4036-10 package you get a computer with digital readout software (extended functions), TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4036-10: 0\" – 36\" (0 mm – 914.4 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4036-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4036-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4036-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207273073,"sku":"MT-4036-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4036-10-mic-trac-4000-base-unit-0-36-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381957075057.jpg?v=1761751588"},{"product_id":"gagemaker-mt-4048-10-mic-trac-4000-base-unit-0-48-with-computer-software-tf-2r-setting-blocks-and-shipping-carton","title":"Gagemaker MT-4048-10 | MIC TRAC 4000 Base Unit, 0\" – 48\" | ±.00005\" Accuracy, .00001\" Resolution","description":"\u003cp\u003eGagemaker MT-4048-10 is the MIC TRAC™ 4000 base unit with a 0\" – 48\" internal range, ±.00005\" accuracy and .00001\" resolution. The MT-4048-10 comes with a computer running digital readout software with extended functions, TF-2R setting blocks and a shipping carton.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal range for MT-4048-10: 0\" – 48\" (0 mm – 1219.2 mm)\u003c\/li\u003e\n\u003cli\u003eMT-4048-10 accuracy ±.00005\", resolution .00001\"\u003c\/li\u003e\n\u003cli\u003eMT-4048-10 includes computer and digital readout software with extended functions\u003c\/li\u003e\n\u003cli\u003eTF-2R setting blocks and shipping carton supplied with the MT-4048-10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gagemaker","offers":[{"title":"Default Title","offer_id":42170207305841,"sku":"MT-4048-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/gagemaker-mic-trac-default-title-gagemaker-mt-4048-10-mic-trac-4000-base-unit-0-48-with-computer-software-tf-2r-setting-blocks-and-shipping-carton-25381957107825.jpg?v=1761751587"},{"product_id":"mitutoyo-293-100-10-high-accuracy-digital-micrometer-0-25mm-absolute-digimatic-2","title":"Mitutoyo 293-100-10 | High Accuracy Digital Micrometer | 0–25 mm, 0.1 µm","description":"\u003cp\u003eThe Mitutoyo 293-100-10 is a 0–25 mm ABSOLUTE Digimatic high-accuracy micrometer with a 0.1 µm resolution ABS rotary sensor, intended for very accurate hand-held work such as Gauge R\u0026amp;R studies. High-accuracy screw machining keeps instrumental error to 0.5 µm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDigital step 0.1 µm or 0.5 µm\u003c\/li\u003e\n\u003cli\u003eRigid frame with constant-force mechanism (7–9 N)\u003c\/li\u003e\n\u003cli\u003eFlatness 0.3 µm, parallelism 0.6 µm\u003c\/li\u003e\n\u003cli\u003eSpindle lock, ø6.35 mm spindle, 0.5 mm pitch\u003c\/li\u003e\n\u003cli\u003eData output and preset; CR2032 battery, approx. 2 years life\u003c\/li\u003e\n\u003cli\u003eDelivered with box, key, driver, battery, heat insulating cover and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170227785841,"sku":"293-100-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-high-accuracy-digital-micrometers-default-title-mitutoyo-293-100-10-high-accuracy-digital-micrometer-0-25mm-absolute-digimatic-2-25382013141105.png?v=1761751404"},{"product_id":"mitutoyo-293-130-10-high-accuracy-digital-micrometer-0-1-absolute-digimatic-2","title":"Mitutoyo 293-130-10 | High Accuracy Digital Micrometer | 0–1 in, 0.000005 in","description":"\u003cp\u003eMitutoyo 293-130-10 is an inch\/metric MDH ABSOLUTE Digimatic micrometer covering 0–1 in (0–25.4 mm) with a resolution of 0.000005 in \/ 0.1 µm, for exacting hand-held measurement. A stiff frame, constant-force ratchet and precision-cut spindle thread support steady readings, with audible clicks confirming the measurement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1 in (0–25.4 mm), inch\/metric\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped faces with micro-lap finish; flatness 0.3 µm, parallelism 0.6 µm\u003c\/li\u003e\n\u003cli\u003eSpindle lock, ø6.35 mm spindle, 0.635 mm pitch\u003c\/li\u003e\n\u003cli\u003eRemovable heat shield reduces body-heat expansion errors\u003c\/li\u003e\n\u003cli\u003eData output; CR2032 battery, approx. 2 years\u003c\/li\u003e\n\u003cli\u003eIncludes box, key, driver, battery, heat insulating cover and inspection certificate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170227916913,"sku":"293-130-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-high-accuracy-digital-micrometers-default-title-mitutoyo-293-130-10-high-accuracy-digital-micrometer-0-1-absolute-digimatic-2-25382013534321.png?v=1761751403"},{"product_id":"mitutoyo-293-180-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm","title":"Mitutoyo 293-180-30 | QuantuMike Digital Micrometer IP65 | 0-1 in, with output","description":"\u003cp\u003eThe Mitutoyo 293-180-30 QuantuMike covers 0-1 in (0-25.4 mm) and reads to 0.001 mm or 0.00005 in, with ±0.00005 in (±1 µm) accuracy. This version includes SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-1 in (0-25.4 mm), with SPC data output\u003c\/li\u003e\n\u003cli\u003eSpindle feeds 2 mm per thimble turn rather than the usual 0.5 mm; ratchet thimble gives a constant measuring force\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped measuring faces resist wear; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eInch\/metric switchable readout, 0.001 mm \/ 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228146289,"sku":"293-180-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-180-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-25382013796465.png?v=1761751402"},{"product_id":"mitutoyo-293-181-30-digital-micrometer-quantumike-ip65-inch-metric-range-1-2-25-4-50-8-mm","title":"Mitutoyo 293-181-30 | QuantuMike Digital Micrometer IP65 | 1-2 in, with output","description":"\u003cp\u003eMeasuring from 1-2 in (25.4-50.8 mm), the 293-181-30 is a coolant-proof QuantuMike digital micrometer rated IP65 with ±0.00005 in (±1 µm) accuracy. It is the variant fitted with SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 1-2 in (25.4-50.8 mm), SPC data output fitted\u003c\/li\u003e\n\u003cli\u003eCoarse 2 mm spindle thread for quick travel to size; constant-force ratchet thimble with audible clicks\u003c\/li\u003e\n\u003cli\u003eWear-resistant carbide tips on both faces; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eReads 0.001 mm or 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228310129,"sku":"293-181-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-181-30-digital-micrometer-quantumike-ip65-inch-metric-range-1-2-25-4-50-8-mm-25382013862001.png?v=1761751399"},{"product_id":"mitutoyo-293-182-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm","title":"Mitutoyo 293-182-30 | QuantuMike Digital Micrometer IP65 | 2-3 in, with output","description":"\u003cp\u003eFor outside measurement across 2-3 in (50.8-76.2 mm), Mitutoyo's 293-182-30 QuantuMike pairs a fast 2 mm-per-turn spindle with ±0.00005 in (±1 µm) accuracy. Readings can be sent out through its SPC data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 2-3 in (50.8-76.2 mm), includes SPC output\u003c\/li\u003e\n\u003cli\u003eRapid 2 mm-per-revolution spindle feed; ratchet thimble clicks to confirm consistent force\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; built-in Hold for reading the result off the workpiece\u003c\/li\u003e\n\u003cli\u003eResolution 0.001 mm \/ 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228408433,"sku":"293-182-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-182-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-25382014156913.png?v=1761751398"},{"product_id":"mitutoyo-293-183-30-digital-micrometer-quantumike-ip65-inchmetric-range-3-4-76-2-101-6-mm","title":"Mitutoyo 293-183-30 | QuantuMike Digital Micrometer IP65 | 3-4 in, with output","description":"\u003cp\u003eThis 293-183-30 QuantuMike digital micrometer from Mitutoyo spans 3-4 in (76.2-101.6 mm) with ±0.0001 in (±2 µm) accuracy and an inch\/metric display. An SPC data output is built in on this model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 3-4 in (76.2-101.6 mm), SPC output version\u003c\/li\u003e\n\u003cli\u003eThimble turn moves the spindle 2 mm instead of 0.5 mm; repeatable force from the ratchet thimble mechanism\u003c\/li\u003e\n\u003cli\u003eWear-resistant carbide tips on both faces; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eInch or metric display to 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228506737,"sku":"293-183-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-183-30-digital-micrometer-quantumike-ip65-inchmetric-range-3-4-76-2-101-6-mm-25382015041649.png?v=1761751396"},{"product_id":"mitutoyo-293-185-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-w-o-output","title":"Mitutoyo 293-185-30 | QuantuMike Digital Micrometer IP65 | 0-1 in, no output","description":"\u003cp\u003eThe Mitutoyo 293-185-30 QuantuMike covers 0-1 in (0-25.4 mm) and reads to 0.001 mm or 0.00005 in, with ±0.00005 in (±1 µm) accuracy. This version has no data output, so readings are taken from the display.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0-1 in (0-25.4 mm), no output port\u003c\/li\u003e\n\u003cli\u003eSpindle feeds 2 mm per thimble turn rather than the usual 0.5 mm; constant-force ratchet thimble with audible clicks\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eSwitchable inch\/metric reading\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228539505,"sku":"293-185-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-185-30-digital-micrometer-quantumike-ip65-inch-metric-range-0-1-0-25-4-mm-w-o-output-25382015107185.png?v=1761751396"},{"product_id":"mitutoyo-293-187-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-w-o-output","title":"Mitutoyo 293-187-30 | QuantuMike Digital Micrometer IP65 | 2-3 in, no output","description":"\u003cp\u003eFor outside measurement across 2-3 in (50.8-76.2 mm), Mitutoyo's 293-187-30 QuantuMike pairs a fast 2 mm-per-turn spindle with ±0.00005 in (±1 µm) accuracy. No data output is fitted on this model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 2-3 in (50.8-76.2 mm), display-only version\u003c\/li\u003e\n\u003cli\u003eRapid 2 mm-per-revolution spindle feed; repeatable force from the ratchet thimble mechanism\u003c\/li\u003e\n\u003cli\u003eCarbide faces for long-term accuracy; hold function freezes the reading for viewing away from the part\u003c\/li\u003e\n\u003cli\u003eMetric or inch readout at 0.00005 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228703345,"sku":"293-187-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-187-30-digital-micrometer-quantumike-ip65-inch-metric-range-2-3-50-8-76-2-mm-w-o-output-25382015336561.png?v=1761751394"},{"product_id":"mitutoyo-293-188-30-digital-micrometer-quantumike-ip65-inch-metric-range-3-4-76-2-101-6-mm-w-o-output","title":"Mitutoyo 293-188-30 | QuantuMike Digital Micrometer IP65 | 3-4 in, no output","description":"\u003cp\u003eThis 293-188-30 QuantuMike digital micrometer from Mitutoyo spans 3-4 in (76.2-101.6 mm) with ±0.0001 in (±2 µm) accuracy and an inch\/metric display. This model is supplied without a data output.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 3-4 in (76.2-101.6 mm), without data output\u003c\/li\u003e\n\u003cli\u003eFast 2 mm spindle pitch shortens set-up time between sizes; ratchet thimble gives a constant measuring force\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped measuring faces resist wear; hold key keeps the value on screen after withdrawal\u003c\/li\u003e\n\u003cli\u003eDisplays inch or metric values\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170228834417,"sku":"293-188-30","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-digimatic-micrometers-quantumike-ip65-default-title-mitutoyo-293-188-30-digital-micrometer-quantumike-ip65-inch-metric-range-3-4-76-2-101-6-mm-w-o-output-25382015434865.png?v=1761751393"},{"product_id":"mitutoyo-129-110-depth-micrometer-interchangeable-rods-0-75mm-63mm-base","title":"Mitutoyo 129-110 | Depth Micrometer | Interchangeable rods, 0-75 mm, 63 mm base","description":"\u003cp\u003e\u003cstrong\u003ePart No. 129-110 | Range 0–75 mm | Graduation 0.01 mm | Accuracy ±3 µm | 3 Interchangeable Rods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-110 depth micrometer is designed for accurate measurement of holes, slots, steps, recesses, counterbores and shoulder distances across a 0–75 mm range. Its hardened, ground and micro-lapped reference base provides a stable surface across the opening, while the micrometer head drives a Ø4 mm measuring rod down to the bottom of the feature.\u003c\/p\u003e\n\u003cp\u003eThree interchangeable rods extend the measuring range in 25 mm steps, allowing the instrument to cover depths up to 75 mm. Each rod has a lapped measuring face, while the measuring rod clamp secures the selected rod during use. A ratchet stop helps maintain consistent measuring force for repeatable readings.\u003c\/p\u003e\n\u003cp\u003eThe compact 63.5 × 16 mm base is useful when measuring around narrow shoulders and smaller counterbores where a larger reference base could overhang the workpiece. The 129-110 is suited to dimensional inspection of machined components, including counterbore depths, slot and keyway depths, step heights and shoulder distances.\u003c\/p\u003e\n\u003cp\u003eFor applications requiring a longer measuring range, the Mitutoyo 129-153 provides a 0–300 mm range with 12 interchangeable rods.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0–75 mm measuring range using 3 interchangeable rods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for precise analog depth readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±3 µm micrometer head accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened, ground and micro-lapped 63.5 × 16 mm reference base.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eØ4 mm interchangeable rods with lapped measuring faces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e25 mm rod increments for flexible depth measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRatchet stop helps provide consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasuring rod clamp secures the selected rod during measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied in a fitted case for storage and protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for counterbores, slots, keyways, steps, recesses and shoulder measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-110 is suitable for machine shops, mould and die makers, quality inspectors, maintenance teams and dimensional inspection applications requiring depth measurement up to 75 mm.\u003c\/p\u003e\n\u003cp\u003eIt can be used for first-off inspection, checking machined features between operations, verifying counterbore and slot depths, and measuring recesses or shoulder distances on manufactured components.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required measuring depth and secure it with the measuring rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the micrometer setting against a suitable reference such as a surface plate or gauge block.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the 63.5 × 16 mm base flat and square across the feature opening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the thimble to extend the rod toward the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble, taking the selected rod's starting value into account when determining the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-110 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 is used to measure the depth of holes, slots, steps, recesses, counterbores and similar internal features from 0 to 75 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-110?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head accuracy is ±3 µm. The interchangeable rods have an accuracy specification of ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many interchangeable rods are supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied product information specifies 3 interchangeable Ø4 mm rods with 25 mm increments covering the 0–75 mm measuring range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the base size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reference base measures 63.5 × 16 mm, with a specified base flatness of 1.3 µm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Mitutoyo 129-110 require a battery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 129-110 is a mechanical analog depth micrometer and does not require a battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-110 and 129-153?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-110 covers 0–75 mm with 3 interchangeable rods and a 63.5 × 16 mm base. The 129-153 extends the measuring range to 0–300 mm and uses 12 interchangeable rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-110 in Saudi Arabia?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services in Dammam at \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechsaudi.com\"\u003emathews@generaltechsaudi.com\u003c\/a\u003e for pricing and availability.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229325937,"sku":"129-110","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-110-depth-micrometer-interchangeable-rods-0-75mm-63mm-base-25382016417905.png?v=1761751384"},{"product_id":"mitutoyo-129-111-depth-micrometer-interchangeable-rods-0-100mm-63mm-base","title":"Mitutoyo 129-111 | Depth Micrometer | Interchangeable rods, 0-100 mm, 63 mm base","description":"\u003cp\u003e\u003cstrong\u003ePart No. 129-111 | Range 0–100 mm | Graduation 0.01 mm | Accuracy ±3 µm | 4 Interchangeable Rods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-111 depth micrometer is designed for accurate measurement of holes, slots, steps, recesses, counterbores and shoulder distances across a 0–100 mm range. Its hardened, ground and micro-lapped reference base provides a stable surface across the opening, while the micrometer head drives a Ø4 mm interchangeable measuring rod to the bottom of the feature.\u003c\/p\u003e\n\u003cp\u003eFour interchangeable rods extend the measuring range in 25 mm steps, allowing one instrument to cover depths up to 100 mm. Each rod has a lapped measuring face, and the measuring rod clamp secures the selected rod during use. A ratchet stop helps maintain consistent measuring force for repeatable readings.\u003c\/p\u003e\n\u003cp\u003eThe 63.5 × 16 mm base is suited to applications where a compact reference surface is useful around narrow shoulders and smaller counterbores. The micrometer provides 0.01 mm graduation and ±3 µm accuracy for the micrometer head, while the interchangeable rods are specified at ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003eFor applications requiring a longer measuring range, the Mitutoyo 129-153 provides a 0–300 mm range with 12 interchangeable rods.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e0–100 mm measuring range using 4 interchangeable rods.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation for precise analog depth readings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±3 µm micrometer head accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened, ground and micro-lapped 63.5 × 16 mm reference base.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eØ4 mm interchangeable rods with lapped measuring faces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e25 mm rod increments for flexible depth measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRatchet stop helps provide consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasuring rod clamp secures the selected rod during measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied in a fitted case for storage and protection.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSuitable for counterbores, slots, keyways, steps, recesses and shoulder measurements.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-111 is suitable for machine shops, mould and die makers, quality inspectors, maintenance teams and dimensional inspection applications requiring depth measurement up to 100 mm.\u003c\/p\u003e\n\u003cp\u003eIt can be used for first-off inspection, checking machined features between operations, verifying counterbore and slot depths, and measuring recesses or shoulder distances on manufactured components.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the required measuring depth and secure it with the measuring rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the micrometer setting against a suitable reference such as a surface plate or gauge block.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the 63.5 × 16 mm base flat and square across the feature opening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the thimble to extend the rod toward the bottom of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinish the measurement using the ratchet stop to apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble, taking the selected rod's starting value into account when determining the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-111 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 is used to measure the depth of holes, slots, steps, recesses, counterbores and similar internal features from 0 to 100 mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-111?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer head accuracy is ±3 µm. The interchangeable rods have an accuracy specification of ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many interchangeable rods are supplied?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 uses 4 interchangeable Ø4 mm rods with 25 mm increments to cover the 0–100 mm measuring range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the base size?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe reference base measures 63.5 × 16 mm. Its specified flatness is 1.3 µm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Mitutoyo 129-111 use a battery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 129-111 is a mechanical analog depth micrometer and does not require a battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-111 and 129-153?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-111 covers 0–100 mm with 4 interchangeable rods and a 63.5 × 16 mm base. The 129-153 extends the range to 0–300 mm and uses 12 interchangeable rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-111 in Saudi Arabia?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eContact General Tech Services in Dammam at \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechsaudi.com\"\u003emathews@generaltechsaudi.com\u003c\/a\u003e for pricing and availability.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229358705,"sku":"129-111","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-111-depth-micrometer-interchangeable-rods-0-100mm-63mm-base-25382016450673.png?v=1761751383"},{"product_id":"mitutoyo-129-112-depth-micrometer-interchangeable-rods-0-150mm-63mm-base","title":"Mitutoyo 129-112 | Depth Micrometer | Interchangeable rods, 0-150 mm, 63 mm base","description":"\u003cp\u003e\u003cstrong\u003ePart No. 129-112 | Range 0–150 mm | Graduation 0.01 mm | Accuracy ±3 µm | 6 Interchangeable Rods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-112 depth micrometer is an analog, interchangeable-rod instrument designed for measuring the depth of holes, slots, steps, recesses, counterbores and other machined features across a 0–150 mm range. It uses 6 interchangeable Ø4 mm rods, with the rods arranged in 25 mm increments to provide flexible depth measurement from a single instrument.\u003c\/p\u003e\n\u003cp\u003eThe 63.5 × 16 mm hardened base provides a compact reference surface for measurements where access around the feature is limited. The base has a specified flatness of 1.3 µm, while each rod has a lapped measuring face with a specified flatness of 0.3 µm.\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has a 0.01 mm graduation and a specified accuracy of ±3 µm. Interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L represents the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force during repeated measurements, while the measuring rod clamp secures the selected rod in position. The mechanical analog design requires no battery and is suitable for routine dimensional inspection.\u003c\/p\u003e\n\u003cp\u003eThe 129-112 is particularly suited to applications where a narrower base can provide easier access around shoulders, slots and other restricted features. For the same 0–150 mm range with a wider 101.6 × 16 mm base, see the Mitutoyo 129-116.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e6 interchangeable Ø4 mm rods cover the 0–150 mm measurement range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e25 mm rod increments provide flexible depth measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.01 mm graduation supports fine metric measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±3 µm specified micrometer head accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompact 63.5 × 16 mm base provides access around narrower features.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBase flatness is specified at 1.3 µm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRod measuring-face flatness is specified at 0.3 µm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRatchet stop helps maintain consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasuring rod clamp secures the selected rod.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied in a fitted case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor pricing and availability of the Mitutoyo 129-112, call \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e for a quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-112 is suited to machine shops, toolrooms, mould and die manufacturing, quality control departments, maintenance teams and metrology environments requiring metric depth measurement up to 150 mm.\u003c\/p\u003e\n\u003cp\u003eTypical applications include measuring counterbore depths, blind holes, slots, keyways, steps, shoulders and recesses on machined components. It can also be used for first-off inspection, in-process dimensional checks and maintenance measurements.\u003c\/p\u003e\n\u003cp\u003eIts 63.5 mm base is useful where a compact reference surface is preferred around narrower shoulders and restricted measurement locations. The 101.6 mm-base 129-116 provides the same 0–150 mm range in a wider-base configuration.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the feature depth and fit it to the micrometer head.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the selected rod using the measuring rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against the applicable reference surface or calibrated standard before measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the base flat and square across the opening of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the thimble until the rod contacts the bottom of the feature, finishing with the ratchet stop to apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble scales and account for the selected rod's starting value when determining the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor critical dimensional inspection, follow the applicable calibration and measurement procedure for the instrument and application.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-112 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is an analog depth micrometer for measuring the depth of holes, slots, steps, recesses, counterbores and similar features across a 0–150 mm range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-112?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specified micrometer head accuracy is ±3 µm. Interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many interchangeable rods are included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-112 specification lists 6 × Ø4 mm interchangeable rods with lapped measuring faces. The rods are arranged in 25 mm increments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the base size of the 129-112?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe base measures 63.5 × 16 mm and has a specified flatness of 1.3 µm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the graduation of the 129-112?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe micrometer has a 0.01 mm graduation and is configured as a metric instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-112 and 129-116?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth models cover a 0–150 mm measurement range and use 6 interchangeable rods. The 129-112 has a 63.5 × 16 mm base, while the 129-116 has a larger 101.6 × 16 mm base.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the 129-112 and 129-153?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 129-112 covers 0–150 mm using 6 interchangeable rods. The 129-153 extends the measurement range to 0–300 mm and uses 12 interchangeable rods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 129-112 require a battery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is a mechanical analog depth micrometer and does not require a battery for normal operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-112 in Saudi Arabia?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall General Tech Services on \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechsaudi.com\"\u003emathews@generaltechsaudi.com\u003c\/a\u003e to request current pricing and availability.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229391473,"sku":"129-112","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-112-depth-micrometer-interchangeable-rods-0-150mm-63mm-base-25382017433713.png?v=1761751382"},{"product_id":"mitutoyo-129-129-depth-micrometer-interchangeable-rods-0-2-4-base","title":"Mitutoyo 129-129 | Depth Micrometer | Interchangeable rods, 0-2\", 4\" base","description":"\u003cp\u003e\u003cstrong\u003ePart No. 129-129 | Range 0–2\" | Graduation 0.001\" | Accuracy ±0.00012\" | 2 Interchangeable Rods\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-129 depth micrometer is an analog, interchangeable-rod instrument designed for measuring the depth of holes, slots, steps, recesses, counterbores and other machined features across a 0–2\" range. It uses 2 interchangeable Ø4 mm rods, with a 1\" rod increment, allowing the instrument to cover the specified measurement range.\u003c\/p\u003e\n\u003cp\u003eThe 4\" × 0.63\" hardened base provides a broad reference surface across suitable openings. Its hardened, precision-ground and micro-lap finished surface helps provide stable contact when measuring depths on housings, castings, flanges and machined components.\u003c\/p\u003e\n\u003cp\u003eThe micrometer head has a 0.001\" graduation and a specified accuracy of ±0.00012\". The interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L represents the maximum measuring length in millimetres. The rod measuring-face flatness is 0.3 µm, while the base flatness is 2 µm.\u003c\/p\u003e\n\u003cp\u003eA ratchet stop helps maintain consistent measuring force during repeated measurements. The measuring rod clamp secures the selected rod in position, while the mechanical analog design provides operation without a battery.\u003c\/p\u003e\n\u003cp\u003eThe 129-129 is suited to inch-based depth inspection where a broad 4\" reference base is useful. Its 0–2\" range makes it appropriate for relatively shallow depth measurements on machined parts.\u003c\/p\u003e\n\u003ch2\u003eKey Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2 interchangeable Ø4 mm rods cover the specified 0–2\" measurement range.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1\" rod increment provides flexible depth measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e0.001\" graduation supports fine inch-based measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e±0.00012\" specified micrometer head accuracy.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4\" × 0.63\" hardened base provides a broad reference surface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBase is hardened, precision ground and micro-lap finished.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRod measuring faces have a specified flatness of 0.3 µm.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRatchet stop helps maintain consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMeasuring rod clamp secures the selected rod.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSupplied in a fitted case.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor pricing and availability of the Mitutoyo 129-129, call \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e for a quote.\u003c\/p\u003e\n\u003ch2\u003eWho This Product Is Best For\u003c\/h2\u003e\n\u003cp\u003eThe Mitutoyo 129-129 is suited to machine shops, toolrooms, mould and die manufacturing, quality control departments, maintenance teams and metrology environments requiring inch-based depth measurement up to 2\".\u003c\/p\u003e\n\u003cp\u003eTypical applications include checking counterbore depths, blind holes, slots, keyways, steps, shoulders and recesses on machined components. It can also be used for first-off inspection, in-process dimensional checks and maintenance measurements.\u003c\/p\u003e\n\u003cp\u003eThe 4\" base provides a relatively wide reference surface, making this configuration suitable for measurements across larger openings where additional base support is useful.\u003c\/p\u003e\n\u003ch2\u003eHow to Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eSelect the interchangeable rod appropriate for the feature depth and fit it to the micrometer head.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSecure the selected rod using the measuring rod clamp.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCheck the instrument against the applicable reference surface or calibrated standard before measurement.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePosition the base flat and square across the opening of the feature.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurn the thimble until the rod contacts the bottom of the feature, finishing with the ratchet stop to apply consistent measuring force.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRead the sleeve and thimble scales and account for the selected rod's starting value when determining the total depth.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eFor critical dimensional inspection, follow the applicable calibration and measurement procedure for the instrument and application.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Mitutoyo 129-129 used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is an analog depth micrometer for measuring holes, slots, steps, recesses, counterbores and similar features across a 0–2\" range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the range and graduation of the 129-129?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe measuring range is 0–2\" and the graduation is 0.001\". The instrument is configured as an inch-based depth micrometer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow accurate is the Mitutoyo 129-129?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe specified micrometer head accuracy is ±0.00012\". Interchangeable rod accuracy is specified as ±(2 + L\/75) µm, where L is the maximum measuring length in millimetres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many rods are included with the 129-129?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe supplied specification lists 2 × Ø4 mm interchangeable rods with lapped measuring faces. The rod increment is specified as 1\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the base size of the 129-129?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe base measures 4\" × 0.63\" and has a specified flatness of 2 µm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the 129-129 an inch or metric tool?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is an inch tool with 0.001\" graduation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the 129-129 require a battery?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. It is a mechanical analog depth micrometer and does not require a battery for normal operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I buy the Mitutoyo 129-129 in Saudi Arabia?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCall General Tech Services on \u003cstrong\u003e+966 569 289 544\u003c\/strong\u003e or email \u003ca href=\"mailto:mathews@generaltechsaudi.com\"\u003emathews@generaltechsaudi.com\u003c\/a\u003e to request current pricing and availability.\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170229489777,"sku":"129-129","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-depth-micrometers-default-title-mitutoyo-129-129-depth-micrometer-interchangeable-rods-0-2-4-base-25382017663089.png?v=1761751381"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/collections\/micrometer_75cce8f0-0a5f-42b3-862a-d86dfcd657af.jpg?v=1794370762","url":"https:\/\/www.generaltechshop.sa\/collections\/measurement-micrometers.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}