{"title":"Force \u0026 Torque Sensors","description":"\u003cp\u003eForce and torque sensors convert load or twisting force into an electrical signal for display or control. This category lists force sensors and torque sensors for test rigs and machinery. They need a suitable indicator or controller to show the reading.\u003c\/p\u003e\u003cp\u003eThey are built into test benches, assembly equipment and monitoring systems. Check the capacity range, output signal, mounting style, accuracy and the direction in which force or torque must be measured, and the environment around the rig.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasuring shaft torque on test benches\u003c\/li\u003e\n\u003cli\u003eMonitoring press and assembly force\u003c\/li\u003e\n\u003cli\u003eLoad measurement in machine development\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"mark-10-mr06-200-wire-crimp-pull-sensor-200-lbf-1-000-n","title":"Mark-10 MR06-200 | Wire Crimp Pull Sensor | 200 lbF (1,000 N)","description":"\u003cp\u003eThe Mark-10 MR06-200 is a hand-operated sensor for measuring the pull-off force of wire crimps, rated to 200 lbF (1,000 N). Squeezing the ergonomic handles tensions the sample until it breaks, and a connected Mark-10 indicator (sold separately) records the peak. A rotating turret with several slot sizes takes wires up to 0.25 in (6.4 mm) in diameter, making it practical for field checks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test family of interchangeable sensors and indicators\u003c\/li\u003e\n\u003cli\u003eErgonomic handles with a tensioning mechanism\u003c\/li\u003e\n\u003cli\u003eRotating turret accepts wire up to 0.25 in (6.4 mm)\u003c\/li\u003e\n\u003cli\u003eNIST-traceable calibration certificate with data included\u003c\/li\u003e\n\u003cli\u003eCombined sensor and indicator certificate (CERT-SI) available when ordering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163921009,"sku":"MR06-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-wire-pull-testers-default-title-mark-10-mr06-200-handheld-wire-crimp-pull-tester-25381812043889.jpg?v=1761752465"},{"product_id":"mark-10-fs05-500-series-fs05-tension-compression-force-sensor-500-lbf-2-5-kn","title":"Mark-10 FS05-500 | Series FS05 Tension \u0026 Compression Force Sensor | 500 lbF \/ 2.5 kN","description":"\u003cp\u003eThe Mark-10 FS05-500 is a Series FS05 force sensor with a 500 lbF (2.5 kN) capacity for tension and compression. No separate connection cable is needed: the FS05-500 sits directly on the crosshead of the F105, F305, F505 or F505H. Configuration and calibration data for the 500 lbF (2.5 kN) range are stored in the FS05-500, and an optional AC1083 adapter allows off-site calibration with a Mark-10 indicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo connection cables between the 500 lbF sensor and the frame\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: FS05-500 stores its own calibration data (adapter AC1083 for indicator use)\u003c\/li\u003e\n\u003cli\u003eFS05-500 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eFS05 range: tension and compression to 500 lbF (2.5 kN)\u003c\/li\u003e\n\u003cli\u003eFS05-500 mounts directly to the F105, F305, F505 or F505H crosshead\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671018097,"sku":"FS05-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/F305_main_800x_aa185b42-a865-4ff8-8e41-2781c1843d0c.jpg?v=1791705347"},{"product_id":"mark-10-mr03-1-series-r03-tension-compression-force-sensor-1-lbf-5-n","title":"Mark-10 MR03-1 | Series R03 Tension \u0026 Compression Force Sensor | 1 lbF \/ 5 N","description":"\u003cp\u003eThe Mark-10 MR03-1 is a Series R03 smart force sensor with a capacity of 1 lbF \/ 5 N, made for tension and compression measurement. Threaded holes on two sides take a variety of hooks and implements, which makes it a good fit for inline testing, and the housing is rugged aluminium. The R03 series spans 0.25 to 100 lbF (1 to 500 N) and connects to Mark-10 indicators (sold separately) via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 lbF \/ 5 N tension and compression capacity\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing\u003c\/li\u003e\n\u003cli\u003eThreaded holes on two sides for hooks and implements\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671050865,"sku":"MR03-1","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-1-mr03_updated.jpg?v=1791706794"},{"product_id":"mark-10-mr55-20-series-r55-square-drive-torque-sensor-20-lbfin-2-nm","title":"Mark-10 MR55-20 | Series R55 Square Drive Torque Sensor | 20 lbFin \/ 2 Nm","description":"\u003cp\u003eThe Mark-10 MR55-20 is a 20 lbFin (2 Nm) Series R55 torque sensor with square drives at both ends. Square drives on each end let the MR55-20 sit inline with a torque wrench or be built into OEM test equipment. The 20 lbFin sensor connects to Mark-10 indicators, sold separately, through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eR55 capacity: 20 lbFin (2 Nm)\u003c\/li\u003e\n\u003cli\u003eSquare drive at each end of the MR55-20\u003c\/li\u003e\n\u003cli\u003eStainless steel and aluminium construction (2 Nm model)\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR55-20 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR55-20 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR55-20 together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671280241,"sku":"MR55-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x.jpg?v=1791705371"},{"product_id":"mark-10-mr03-2-series-r03-tension-compression-force-sensor-2-lbf-10-n","title":"Mark-10 MR03-2 | Series R03 Tension \u0026 Compression Force Sensor | 2 lbF \/ 10 N","description":"\u003cp\u003eRated at 2 lbF \/ 10 N, the Mark-10 MR03-2 is a Series R03 smart sensor for measuring both tensile and compressive force. Housed in rugged aluminium, it has threaded holes on two sides for hooks and other implements and is particularly suited to inline tests. Capacities in the series run from 0.25 to 100 lbF (1 to 500 N); Mark-10 indicators are sold separately and connect via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 2 lbF \/ 10 N\u003c\/li\u003e\n\u003cli\u003eWell suited to inline tests\u003c\/li\u003e\n\u003cli\u003eAluminium housing built for everyday use\u003c\/li\u003e\n\u003cli\u003eAccepts hooks and implements on two threaded sides\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671313009,"sku":"MR03-2","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-2-mr03_updated.jpg?v=1791706821"},{"product_id":"mark-10-mr55-50-series-r55-square-drive-torque-sensor-50-lbfin-5-7-nm","title":"Mark-10 MR55-50 | Series R55 Square Drive Torque Sensor | 50 lbFin \/ 5.7 Nm","description":"\u003cp\u003eMark-10 MR55-50 is a square drive torque sensor rated at 50 lbFin (5.7 Nm). Its stainless steel and aluminium construction and double-ended square drive make the MR55-50 suitable for inline wrench checks and OEM work. The 50 lbFin sensor connects to Mark-10 indicators, sold separately, through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSquare drive at each end of the MR55-50\u003c\/li\u003e\n\u003cli\u003eStainless steel and aluminium construction (5.7 Nm model)\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR55-50 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR55-50 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eInline torque wrench or OEM use up to 50 lbFin\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR55-50 is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671607921,"sku":"MR55-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_c8c08f45-09b9-450e-bba1-7a1a7f787eea.jpg?v=1791705386"},{"product_id":"mark-10-mr03-5-series-r03-tension-compression-force-sensor-5-lbf-25-n","title":"Mark-10 MR03-5 | Series R03 Tension \u0026 Compression Force Sensor | 5 lbF \/ 25 N","description":"\u003cp\u003eWith 5 lbF \/ 25 N capacity, the Mark-10 MR03-5 is part of the Series R03 range of tension and compression smart sensors. Its rugged aluminium body carries threaded holes on two sides, so hooks and implements can be fitted directly for inline test work. It is one of the R03 capacities between 0.25 and 100 lbF (1 to 500 N) and pairs with Mark-10 indicators, sold separately, through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures tensile and compressive force up to 5 lbF \/ 25 N\u003c\/li\u003e\n\u003cli\u003eTwo threaded faces for flexible fixturing\u003c\/li\u003e\n\u003cli\u003eRobust aluminium construction\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671640689,"sku":"MR03-5","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-5-mr03_updated.jpg?v=1791706824"},{"product_id":"mark-10-mr55-100-series-r55-square-drive-torque-sensor-100-lbfin-11-5-nm","title":"Mark-10 MR55-100 | Series R55 Square Drive Torque Sensor | 100 lbFin \/ 11.5 Nm","description":"\u003cp\u003eRated at 100 lbFin (11.5 Nm), the MR55-100 belongs to the Mark-10 Series R55 range. The MR55-100 can be placed inline with a torque wrench or used in other torque applications across many industries. Pair the MR55-100 with a Mark-10 indicator (sold separately) using Plug \u0026amp; Test technology.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless steel and aluminium construction (11.5 Nm model)\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR55-100 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR55-100 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eInline torque wrench or OEM use up to 100 lbFin\u003c\/li\u003e\n\u003cli\u003eRugged cylindrical design, 11.5 Nm rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the 100 lbFin MR55-100, a certificate covering sensor and indicator as a pair is available when ordered together (CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671738993,"sku":"MR55-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_a5e60c9d-a33f-43fc-9984-082516f5f0f4.jpg?v=1791705411"},{"product_id":"mark-10-mr03-10-series-r03-tension-compression-force-sensor-10-lbf-50-n","title":"Mark-10 MR03-10 | Series R03 Tension \u0026 Compression Force Sensor | 10 lbF \/ 50 N","description":"\u003cp\u003eThe Mark-10 MR03-10 is a Series R03 smart force sensor with a capacity of 10 lbF \/ 50 N, made for tension and compression measurement. Threaded holes on two sides take a variety of hooks and implements, which makes it a good fit for inline testing, and the housing is rugged aluminium. The R03 series spans 0.25 to 100 lbF (1 to 500 N) and connects to Mark-10 indicators (sold separately) via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10 lbF \/ 50 N tension and compression capacity\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing\u003c\/li\u003e\n\u003cli\u003eThreaded holes on two sides for hooks and implements\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671771761,"sku":"MR03-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-10-mr03_updated.jpg?v=1791706826"},{"product_id":"mark-10-mr55-200-series-r55-square-drive-torque-sensor-200-lbfin-22-nm","title":"Mark-10 MR55-200 | Series R55 Square Drive Torque Sensor | 200 lbFin \/ 22 Nm","description":"\u003cp\u003eWith a 200 lbFin (22 Nm) capacity, Mark-10 MR55-200 is an R55 square drive sensor for torque testing. Its stainless steel and aluminium construction and double-ended square drive make the MR55-200 suitable for inline wrench checks and OEM work. Pair the MR55-200 with a Mark-10 indicator (sold separately) using Plug \u0026amp; Test technology.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR55-200 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR55-200 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eInline torque wrench or OEM use up to 200 lbFin\u003c\/li\u003e\n\u003cli\u003eRugged cylindrical design, 22 Nm rating\u003c\/li\u003e\n\u003cli\u003eR55 capacity: 200 lbFin (22 Nm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 can supply a single certificate for the MR55-200 and its indicator when both are ordered at once (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650671837297,"sku":"MR55-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_30eca398-1bf9-4fc3-830b-175ca306c09a.jpg?v=1791705426"},{"product_id":"mark-10-mr55-400-series-r55-square-drive-torque-sensor-400-lbfin-45-nm","title":"Mark-10 MR55-400 | Series R55 Square Drive Torque Sensor | 400 lbFin \/ 45 Nm","description":"\u003cp\u003eMark-10 MR55-400 measures torque up to 400 lbFin (45 Nm) in a rugged cylindrical body. The MR55-400 can be placed inline with a torque wrench or used in other torque applications across many industries. As a Plug \u0026amp; Test sensor, the MR55-400 works with any compatible Mark-10 indicator, purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMR55-400 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eInline torque wrench or OEM use up to 400 lbFin\u003c\/li\u003e\n\u003cli\u003eRugged cylindrical design, 45 Nm rating\u003c\/li\u003e\n\u003cli\u003eR55 capacity: 400 lbFin (45 Nm)\u003c\/li\u003e\n\u003cli\u003eSquare drive at each end of the MR55-400\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR55-400 together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676621425,"sku":"MR55-400","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_d9f8cbe1-32c9-4fd6-933e-22cf9fa6086b.jpg?v=1791705442"},{"product_id":"mark-10-mr03-20-series-r03-tension-compression-force-sensor-20-lbf-100-n","title":"Mark-10 MR03-20 | Series R03 Tension \u0026 Compression Force Sensor | 20 lbF \/ 100 N","description":"\u003cp\u003eRated at 20 lbF \/ 100 N, the Mark-10 MR03-20 is a Series R03 smart sensor for measuring both tensile and compressive force. Housed in rugged aluminium, it has threaded holes on two sides for hooks and other implements and is particularly suited to inline tests. Capacities in the series run from 0.25 to 100 lbF (1 to 500 N); Mark-10 indicators are sold separately and connect via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 20 lbF \/ 100 N\u003c\/li\u003e\n\u003cli\u003eWell suited to inline tests\u003c\/li\u003e\n\u003cli\u003eAluminium housing built for everyday use\u003c\/li\u003e\n\u003cli\u003eAccepts hooks and implements on two threaded sides\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676654193,"sku":"MR03-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-20-mr03_updated.jpg?v=1791706828"},{"product_id":"mark-10-mr03-100-series-r03-tension-compression-force-sensor-100-lbf-500-n","title":"Mark-10 MR03-100 | Series R03 Tension \u0026 Compression Force Sensor | 100 lbF \/ 500 N","description":"\u003cp\u003eWith 100 lbF \/ 500 N capacity, the Mark-10 MR03-100 is part of the Series R03 range of tension and compression smart sensors. Its rugged aluminium body carries threaded holes on two sides, so hooks and implements can be fitted directly for inline test work. It is one of the R03 capacities between 0.25 and 100 lbF (1 to 500 N) and pairs with Mark-10 indicators, sold separately, through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures tensile and compressive force up to 100 lbF \/ 500 N\u003c\/li\u003e\n\u003cli\u003eTwo threaded faces for flexible fixturing\u003c\/li\u003e\n\u003cli\u003eRobust aluminium construction\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676752497,"sku":"MR03-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr03-100-mr03_updated.jpg?v=1791706830"},{"product_id":"mark-10-mr55-1000-series-r55-square-drive-torque-sensor-1000-lbfin-110-nm","title":"Mark-10 MR55-1000 | Series R55 Square Drive Torque Sensor | 1000 lbFin \/ 110 Nm","description":"\u003cp\u003eSeries R55 sensor MR55-1000 from Mark-10 handles torque up to 1000 lbFin (110 Nm). Square drives on each end let the MR55-1000 sit inline with a torque wrench or be built into OEM test equipment. As a Plug \u0026amp; Test sensor, the MR55-1000 works with any compatible Mark-10 indicator, purchased separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInline torque wrench or OEM use up to 1000 lbFin\u003c\/li\u003e\n\u003cli\u003eRugged cylindrical design, 110 Nm rating\u003c\/li\u003e\n\u003cli\u003eR55 capacity: 1000 lbFin (110 Nm)\u003c\/li\u003e\n\u003cli\u003eSquare drive at each end of the MR55-1000\u003c\/li\u003e\n\u003cli\u003eStainless steel and aluminium construction (110 Nm model)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR55-1000 is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676785265,"sku":"MR55-1000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_2009a74e-ddc8-4f06-96aa-ce3383a6fa1f.jpg?v=1791705466"},{"product_id":"mark-10-mr55-5000-series-r55-square-drive-torque-sensor-5000-lbfin-550-nm","title":"Mark-10 MR55-5000 | Series R55 Square Drive Torque Sensor | 5000 lbFin \/ 550 Nm","description":"\u003cp\u003eThe MR55-5000 is the 5000 lbFin (550 Nm) model in the Mark-10 R55 square drive range. The MR55-5000 can be placed inline with a torque wrench or used in other torque applications across many industries. The 5000 lbFin sensor connects to Mark-10 indicators, sold separately, through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged cylindrical design, 550 Nm rating\u003c\/li\u003e\n\u003cli\u003eR55 capacity: 5000 lbFin (550 Nm)\u003c\/li\u003e\n\u003cli\u003eSquare drive at each end of the MR55-5000\u003c\/li\u003e\n\u003cli\u003eStainless steel and aluminium construction (550 Nm model)\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR55-5000 works with Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the 5000 lbFin MR55-5000, a certificate covering sensor and indicator as a pair is available when ordered together (CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676818033,"sku":"MR55-5000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr55-800x_9d30cbc9-7d59-4834-92c3-51fcb22cab32.jpg?v=1791705481"},{"product_id":"mark-10-mr02-100-series-r02-compression-force-sensor-100-lbf-500-n","title":"Mark-10 MR02-100 | Series R02 Compression Force Sensor | 100 lbF \/ 500 N","description":"\u003cp\u003eThe Mark-10 MR02-100 is a 100 lbF \/ 500 N button-style compression force sensor from the Series R02 range. Its small stainless steel body suits heavy-duty applications where installation space is restricted. The R02 series covers compressive loads up to 10,000 lbF (50 kN) and connects to Mark-10 indicators (sold separately) through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100 lbF \/ 500 N compression capacity\u003c\/li\u003e\n\u003cli\u003eButton-type design for tight spaces\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676883569,"sku":"MR02-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair.jpg?v=1791705486"},{"product_id":"mark-10-mr52-10z-series-r52-torque-sensor-10-ozfin-7-ncm","title":"Mark-10 MR52-10Z | Series R52 Torque Sensor | 10 ozFin \/ 7 Ncm","description":"\u003cp\u003eThe Mark-10 MR52-10Z is a 10 ozFin (7 Ncm) Series R52 torque sensor. The MR52-10Z can be used to calibrate torque tools or as a component of a torque testing system. Tapped holes on every face of the MR52-10Z make it straightforward to fix to a workbench or fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eR52 capacity: 10 ozFin (7 Ncm)\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing on the MR52-10Z\u003c\/li\u003e\n\u003cli\u003eTapped holes on every surface of the 7 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR52-10Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR52-10Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR52-10Z together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650676949105,"sku":"MR52-10Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_935dee09-aea7-4578-9964-7b6028904e14.jpg?v=1791705496"},{"product_id":"mark-10-mr02-200-series-r02-compression-force-sensor-200-lbf-1-kn","title":"Mark-10 MR02-200 | Series R02 Compression Force Sensor | 200 lbF \/ 1 kN","description":"\u003cp\u003eRated at 200 lbF \/ 1 kN, the Mark-10 MR02-200 is a Series R02 button sensor for measuring compressive loads. Compact and rugged, with stainless steel construction, it is intended for demanding jobs with little room for a sensor. Series capacities reach 10,000 lbF (50 kN); Mark-10 indicators are sold separately and link via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures compressive force up to 200 lbF \/ 1 kN\u003c\/li\u003e\n\u003cli\u003eCompact, rugged build for heavy-duty use\u003c\/li\u003e\n\u003cli\u003eSmall stainless steel housing\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677014641,"sku":"MR02-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_66c1366e-9e92-4275-90cc-5450c4bf856c.jpg?v=1791705509"},{"product_id":"mark-10-mr05-500-push-pull-sensor-500-lbf-2-500-n","title":"Mark-10 MR05-500 | Push\/Pull Sensor | 500 lbF (2,500 N)","description":"\u003cp\u003eThe Mark-10 MR05-500 is a Series R05 smart sensor in a fully enclosed aluminium housing, measuring push and pull forces up to 500 lbF (2,500 N). It is used for ergonomics and workplace safety studies, as well as general lifting, tension and compression work. Threaded holes allow a variety of mounts and attachments, and a Mark-10 indicator (sold separately) is needed for readings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test family of interchangeable sensors and indicators\u003c\/li\u003e\n\u003cli\u003eRugged, fully enclosed aluminium housing\u003c\/li\u003e\n\u003cli\u003eMeasures push and pull force\u003c\/li\u003e\n\u003cli\u003eThreaded holes for mounting and attachments\u003c\/li\u003e\n\u003cli\u003eNIST-traceable calibration certificate with data included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677047409,"sku":"MR05-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr05-500-mr05-800x.jpg?v=1791706832"},{"product_id":"mark-10-mr52-20z-series-r52-torque-sensor-20-ozfin-14-ncm","title":"Mark-10 MR52-20Z | Series R52 Torque Sensor | 20 ozFin \/ 14 Ncm","description":"\u003cp\u003eMark-10 MR52-20Z measures torque up to 20 ozFin (14 Ncm) in a rugged aluminium housing. Typical uses for the MR52-20Z are torque tool calibration and integration into a torque test system. Tapped holes on every face of the MR52-20Z make it straightforward to fix to a workbench or fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRugged aluminium housing on the MR52-20Z\u003c\/li\u003e\n\u003cli\u003eTapped holes on every surface of the 14 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR52-20Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR52-20Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eFor torque tool calibration up to 20 ozFin\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR52-20Z is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677080177,"sku":"MR52-20Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_0bae4637-fa1b-4c4e-ad85-500cebcb02e6.jpg?v=1791705520"},{"product_id":"mark-10-mr02-500-series-r02-compression-force-sensor-500-lbf-2-5-kn","title":"Mark-10 MR02-500 | Series R02 Compression Force Sensor | 500 lbF \/ 2.5 kN","description":"\u003cp\u003eWith a 500 lbF \/ 2.5 kN capacity, the Mark-10 MR02-500 is a compact Series R02 sensor dedicated to compression measurement. The stainless steel button design keeps the footprint small, making it practical for heavy-duty, space-constrained set-ups. It belongs to a series rated up to 10,000 lbF (50 kN) and pairs with Mark-10 indicators, sold separately, using Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 500 lbF \/ 2.5 kN (compression)\u003c\/li\u003e\n\u003cli\u003eLow-profile button format\u003c\/li\u003e\n\u003cli\u003eMade from stainless steel\u003c\/li\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test sensor and indicator family\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677178481,"sku":"MR02-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_f258a245-6cb6-4688-9546-efc51a4d5326.jpg?v=1791705533"},{"product_id":"mark-10-mr52-50z-series-r52-torque-sensor-50-ozfin-35-ncm","title":"Mark-10 MR52-50Z | Series R52 Torque Sensor | 50 ozFin \/ 35 Ncm","description":"\u003cp\u003eRated at 50 ozFin (35 Ncm), the MR52-50Z belongs to Mark-10 Series R52. Use the MR52-50Z either for calibrating torque tools or as the sensing element within a torque testing set-up. Universal mounting is provided by tapped holes on all surfaces, so the 50 ozFin sensor can be bolted to a bench or test fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTapped holes on every surface of the 35 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR52-50Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR52-50Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eFor torque tool calibration up to 50 ozFin\u003c\/li\u003e\n\u003cli\u003eR52 capacity: 50 ozFin (35 Ncm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the 50 ozFin MR52-50Z, a certificate covering sensor and indicator as a pair is available when ordered together (CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677211249,"sku":"MR52-50Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_6fefd8e6-9fa5-4873-b234-a6c908e887b9.jpg?v=1791705535"},{"product_id":"mark-10-mr52-12-series-r52-torque-sensor-12-lbfin-1-35-nm","title":"Mark-10 MR52-12 | Series R52 Torque Sensor | 12 lbFin \/ 1.35 Nm","description":"\u003cp\u003eWith a 12 lbFin (1.35 Nm) capacity, Mark-10 MR52-12 is an R52 torque sensor for calibration and test work. Typical uses for the MR52-12 are torque tool calibration and integration into a torque test system. Universal mounting is provided by tapped holes on all surfaces, so the 12 lbFin sensor can be bolted to a bench or test fixture.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR52-12 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR52-12 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eFor torque tool calibration up to 12 lbFin\u003c\/li\u003e\n\u003cli\u003eR52 capacity: 12 lbFin (1.35 Nm)\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing on the MR52-12\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 can supply a single certificate for the MR52-12 and its indicator when both are ordered at once (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677276785,"sku":"MR52-12","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_99fde06e-59bc-454d-9daf-c32e04738497.jpg?v=1791705550"},{"product_id":"mark-10-mr02-1000-series-r02-compression-force-sensor-1000-lbf-5-kn","title":"Mark-10 MR02-1000 | Series R02 Compression Force Sensor | 1000 lbF \/ 5 kN","description":"\u003cp\u003eThe Mark-10 MR02-1000 is a 1000 lbF \/ 5 kN button-style compression force sensor from the Series R02 range. Its small stainless steel body suits heavy-duty applications where installation space is restricted. The R02 series covers compressive loads up to 10,000 lbF (50 kN) and connects to Mark-10 indicators (sold separately) through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1000 lbF \/ 5 kN compression capacity\u003c\/li\u003e\n\u003cli\u003eButton-type design for tight spaces\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677342321,"sku":"MR02-1000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_7c3581cc-7fc2-4867-a1cf-ec7307253a67.jpg?v=1791705556"},{"product_id":"mark-10-mr52-50-series-r52-torque-sensor-50-lbfin-5-7-nm","title":"Mark-10 MR52-50 | Series R52 Torque Sensor | 50 lbFin \/ 5.7 Nm","description":"\u003cp\u003eSeries R52 sensor MR52-50 from Mark-10 covers torque up to 50 lbFin (5.7 Nm). Use the MR52-50 either for calibrating torque tools or as the sensing element within a torque testing set-up. With tapped holes on each side, the MR52-50 mounts to a bench or fixture in almost any orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMR52-50 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eFor torque tool calibration up to 50 lbFin\u003c\/li\u003e\n\u003cli\u003eR52 capacity: 50 lbFin (5.7 Nm)\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing on the MR52-50\u003c\/li\u003e\n\u003cli\u003eTapped holes on every surface of the 5.7 Nm sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR52-50 together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677440625,"sku":"MR52-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_958e2a2f-d4f5-4005-be58-44ce30ce3e2e.jpg?v=1791705574"},{"product_id":"mark-10-mr02-2000-series-r02-compression-force-sensor-2000-lbf-10-kn","title":"Mark-10 MR02-2000 | Series R02 Compression Force Sensor | 2000 lbF \/ 10 kN","description":"\u003cp\u003eRated at 2000 lbF \/ 10 kN, the Mark-10 MR02-2000 is a Series R02 button sensor for measuring compressive loads. Compact and rugged, with stainless steel construction, it is intended for demanding jobs with little room for a sensor. Series capacities reach 10,000 lbF (50 kN); Mark-10 indicators are sold separately and link via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures compressive force up to 2000 lbF \/ 10 kN\u003c\/li\u003e\n\u003cli\u003eCompact, rugged build for heavy-duty use\u003c\/li\u003e\n\u003cli\u003eSmall stainless steel housing\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677473393,"sku":"MR02-2000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_7e7c6d83-9687-4f0c-9c7d-e2aad4fbdf47.jpg?v=1791705579"},{"product_id":"mark-10-mr52-100-series-r52-torque-sensor-100-lbfin-11-5-nm","title":"Mark-10 MR52-100 | Series R52 Torque Sensor | 100 lbFin \/ 11.5 Nm","description":"\u003cp\u003eThe MR52-100 is the 100 lbFin (11.5 Nm) model in the Mark-10 R52 range. The MR52-100 can be used to calibrate torque tools or as a component of a torque testing system. With tapped holes on each side, the MR52-100 mounts to a bench or fixture in almost any orientation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor torque tool calibration up to 100 lbFin\u003c\/li\u003e\n\u003cli\u003eR52 capacity: 100 lbFin (11.5 Nm)\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing on the MR52-100\u003c\/li\u003e\n\u003cli\u003eTapped holes on every surface of the 11.5 Nm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR52-100 works with Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR52-100 is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677506161,"sku":"MR52-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr52_main_800x_bd3de25b-7607-4cbc-938a-7276271793f9.jpg?v=1791705589"},{"product_id":"mark-10-mr02-5000-series-r02-compression-force-sensor-5000-lbf-25-kn","title":"Mark-10 MR02-5000 | Series R02 Compression Force Sensor | 5000 lbF \/ 25 kN","description":"\u003cp\u003eWith a 5000 lbF \/ 25 kN capacity, the Mark-10 MR02-5000 is a compact Series R02 sensor dedicated to compression measurement. The stainless steel button design keeps the footprint small, making it practical for heavy-duty, space-constrained set-ups. It belongs to a series rated up to 10,000 lbF (50 kN) and pairs with Mark-10 indicators, sold separately, using Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 5000 lbF \/ 25 kN (compression)\u003c\/li\u003e\n\u003cli\u003eLow-profile button format\u003c\/li\u003e\n\u003cli\u003eMade from stainless steel\u003c\/li\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test sensor and indicator family\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677604465,"sku":"MR02-5000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_20b86cfd-551b-4a7c-8927-fd23ade33084.jpg?v=1791705602"},{"product_id":"mark-10-mr51-10z-series-r51-universal-torque-sensor-10-ozfin-7-ncm","title":"Mark-10 MR51-10Z | Series R51 Universal Torque Sensor | 10 ozFin \/ 7 Ncm","description":"\u003cp\u003eThe Mark-10 MR51-10Z is a 10 ozFin (7 Ncm) Series R51 universal torque sensor for bi-directional testing. The MR51-10Z accepts three interchangeable chuck capacities or a bit holder (ordered separately), so one sensor can test samples of different sizes. The 10 ozFin sensor is built with a high level of overload protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eR51 bi-directional capacity: 10 ozFin (7 Ncm)\u003c\/li\u003e\n\u003cli\u003eInterchangeable chucks for the MR51-10Z, ordered separately\u003c\/li\u003e\n\u003cli\u003eOverload protection on the 7 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR51-10Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR51-10Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR51-10Z together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677637233,"sku":"MR51-10Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x.jpg?v=1791705604"},{"product_id":"mark-10-mr02-10000-series-r02-compression-force-sensor-10000-lbf-50-kn","title":"Mark-10 MR02-10000 | Series R02 Compression Force Sensor | 10000 lbF \/ 50 kN","description":"\u003cp\u003eThe Mark-10 MR02-10000 is a 10000 lbF \/ 50 kN button-style compression force sensor from the Series R02 range. Its small stainless steel body suits heavy-duty applications where installation space is restricted. The R02 series covers compressive loads up to 10,000 lbF (50 kN) and connects to Mark-10 indicators (sold separately) through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10000 lbF \/ 50 kN compression capacity\u003c\/li\u003e\n\u003cli\u003eButton-type design for tight spaces\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677801073,"sku":"MR02-10000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MR02-pair_259de114-2a86-41d5-8005-84b78206cbf7.jpg?v=1791705626"},{"product_id":"mark-10-mr51-20z-series-r51-universal-torque-sensor-20-ozfin-14-ncm","title":"Mark-10 MR51-20Z | Series R51 Universal Torque Sensor | 20 ozFin \/ 14 Ncm","description":"\u003cp\u003eMark-10 MR51-20Z measures torque in both directions up to 20 ozFin (14 Ncm). Interchangeable chucks and a bit holder, each sold separately, adapt the MR51-20Z to a range of sample sizes. The 20 ozFin sensor is built with a high level of overload protection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable chucks for the MR51-20Z, ordered separately\u003c\/li\u003e\n\u003cli\u003eOverload protection on the 14 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR51-20Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR51-20Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eBit holder option for 20 ozFin testing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR51-20Z is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677833841,"sku":"MR51-20Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x_27d43f4b-eeaa-425c-ab2c-6c8c5ddca080.jpg?v=1791705629"},{"product_id":"mark-10-mr51-50z-series-r51-universal-torque-sensor-50-ozfin-35-ncm","title":"Mark-10 MR51-50Z | Series R51 Universal Torque Sensor | 50 ozFin \/ 35 Ncm","description":"\u003cp\u003eRated at 50 ozFin (35 Ncm), the MR51-50Z belongs to Mark-10 Series R51. For general torque tests on samples that vary in size, the MR51-50Z can be fitted with one of three chucks or a bit holder, available separately. Overload protection is a key part of the MR51-50Z design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOverload protection on the 35 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR51-50Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR51-50Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eBit holder option for 50 ozFin testing\u003c\/li\u003e\n\u003cli\u003eR51 bi-directional capacity: 50 ozFin (35 Ncm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the 50 ozFin MR51-50Z, a certificate covering sensor and indicator as a pair is available when ordered together (CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650677964913,"sku":"MR51-50Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x_8e1db304-644c-45f0-9826-ee3f03034117.jpg?v=1791705643"},{"product_id":"mark-10-mr01-300-series-r01-s-beam-force-sensor-300-lbf-1-5-kn","title":"Mark-10 MR01-300 | Series R01 S-Beam Force Sensor | 300 lbF \/ 1.5 kN","description":"\u003cp\u003eThe Mark-10 MR01-300 is a 300 lbF \/ 1.5 kN S-beam smart sensor from Series R01 for measuring tension and compression force. Threaded holes on two sides allow it to be configured in many ways, and the design is used across a broad range of industries. The R01 series covers 50 to 10,000 lbF (250 N to 50 kN) and works with Mark-10 indicators (sold separately) via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e300 lbF \/ 1.5 kN tension and compression capacity\u003c\/li\u003e\n\u003cli\u003eDurable S-beam design\u003c\/li\u003e\n\u003cli\u003eThreaded holes on two sides\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678030449,"sku":"MR01-300","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x.jpg?v=1791705650"},{"product_id":"mark-10-mr51-12-series-r51-universal-torque-sensor-12-lbfin-1-35-nm","title":"Mark-10 MR51-12 | Series R51 Universal Torque Sensor | 12 lbFin \/ 1.35 Nm","description":"\u003cp\u003eWith a 12 lbFin (1.35 Nm) capacity, Mark-10 MR51-12 is an R51 universal torque sensor. Interchangeable chucks and a bit holder, each sold separately, adapt the MR51-12 to a range of sample sizes. Overload protection is a key part of the MR51-12 design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR51-12 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR51-12 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eBit holder option for 12 lbFin testing\u003c\/li\u003e\n\u003cli\u003eR51 bi-directional capacity: 12 lbFin (1.35 Nm)\u003c\/li\u003e\n\u003cli\u003eInterchangeable chucks for the MR51-12, ordered separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 can supply a single certificate for the MR51-12 and its indicator when both are ordered at once (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678063217,"sku":"MR51-12","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x_6a1c24b0-7ad3-4d96-bb31-9c30cfcaaee5.jpg?v=1791705659"},{"product_id":"mark-10-mr01-50-series-r01-s-beam-force-sensor-50-lbf-250-n","title":"Mark-10 MR01-50 | Series R01 S-Beam Force Sensor | 50 lbF \/ 250 N","description":"\u003cp\u003eRated at 50 lbF \/ 250 N, the Mark-10 MR01-50 is a rugged Series R01 S-beam sensor for tensile and compressive measurement. Its durable S-beam body has threaded holes on two sides, giving plenty of options for fixturing. Series capacities run from 50 to 10,000 lbF (250 N to 50 kN); indicators are sold separately and connect through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 50 lbF \/ 250 N\u003c\/li\u003e\n\u003cli\u003eRugged S-beam construction\u003c\/li\u003e\n\u003cli\u003eSupports many mounting configurations\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678161521,"sku":"MR01-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_7594e086-f615-4617-88d3-05ad942679ed.jpg?v=1791705673"},{"product_id":"mark-10-mr51-50-series-r51-universal-torque-sensor-50-lbfin-5-7-nm","title":"Mark-10 MR51-50 | Series R51 Universal Torque Sensor | 50 lbFin \/ 5.7 Nm","description":"\u003cp\u003eSeries R51 sensor MR51-50 from Mark-10 covers bi-directional torque up to 50 lbFin (5.7 Nm). For general torque tests on samples that vary in size, the MR51-50 can be fitted with one of three chucks or a bit holder, available separately. The MR51-50 offers strong protection against overload.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMR51-50 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eBit holder option for 50 lbFin testing\u003c\/li\u003e\n\u003cli\u003eR51 bi-directional capacity: 50 lbFin (5.7 Nm)\u003c\/li\u003e\n\u003cli\u003eInterchangeable chucks for the MR51-50, ordered separately\u003c\/li\u003e\n\u003cli\u003eOverload protection on the 5.7 Nm sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR51-50 together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678194289,"sku":"MR51-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x_8d65db39-f701-42e4-a62c-afdf7564caca.jpg?v=1791705683"},{"product_id":"mark-10-mr01-100-series-r01-s-beam-force-sensor-100-lbf-500-n","title":"Mark-10 MR01-100 | Series R01 S-Beam Force Sensor | 100 lbF \/ 500 N","description":"\u003cp\u003eWith a capacity of 100 lbF \/ 500 N, the Mark-10 MR01-100 is one of the durable Series R01 S-beam force sensors. Two threaded sides let it be mounted in a number of configurations for general industrial force testing. It sits within an R01 range of 50 to 10,000 lbF (250 N to 50 kN) and pairs with Mark-10 indicators, sold separately, using Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures tensile and compressive loads up to 100 lbF \/ 500 N\u003c\/li\u003e\n\u003cli\u003eS-beam body with two threaded sides\u003c\/li\u003e\n\u003cli\u003eSuitable for applications across many industries\u003c\/li\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test family\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678292593,"sku":"MR01-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_c78c912d-676c-4439-95f5-01708eaf2e2c.jpg?v=1791705697"},{"product_id":"mark-10-mr51-100-series-r51-universal-torque-sensor-100-lbfin-11-5-nm","title":"Mark-10 MR51-100 | Series R51 Universal Torque Sensor | 100 lbFin \/ 11.5 Nm","description":"\u003cp\u003eThe MR51-100 is the 100 lbFin (11.5 Nm) model in the Mark-10 R51 universal range. The MR51-100 accepts three interchangeable chuck capacities or a bit holder (ordered separately), so one sensor can test samples of different sizes. The MR51-100 offers strong protection against overload.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBit holder option for 100 lbFin testing\u003c\/li\u003e\n\u003cli\u003eR51 bi-directional capacity: 100 lbFin (11.5 Nm)\u003c\/li\u003e\n\u003cli\u003eInterchangeable chucks for the MR51-100, ordered separately\u003c\/li\u003e\n\u003cli\u003eOverload protection on the 11.5 Nm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR51-100 works with Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR51-100 is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678325361,"sku":"MR51-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr51-800x_1ba6be0b-8e99-45ee-8491-31cd6aa6b522.jpg?v=1791705698"},{"product_id":"mark-10-mr50-10z-series-r50-universal-torque-sensor-10-ozfin-7-ncm","title":"Mark-10 MR50-10Z | Series R50 Universal Torque Sensor | 10 ozFin \/ 7 Ncm","description":"\u003cp\u003eThe Mark-10 MR50-10Z is a 10 ozFin (7 Ncm) Series R50 universal torque sensor for bi-directional measurement. A built-in chuck on the MR50-10Z holds samples up to 1\/2 in (12.7 mm) diameter, depending on capacity. The MR50-10Z can be held by hand or mounted to a torque test stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eR50 bi-directional capacity: 10 ozFin (7 Ncm)\u003c\/li\u003e\n\u003cli\u003eIntegrated chuck on the MR50-10Z, up to 1\/2 in (12.7 mm) depending on capacity\u003c\/li\u003e\n\u003cli\u003eHandheld or stand-mounted use of the 7 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR50-10Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR50-10Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA combined calibration certificate covering the MR50-10Z together with a Mark-10 indicator can be requested at the time of order (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678390897,"sku":"MR50-10Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/R50_updated.jpg?v=1791705714"},{"product_id":"mark-10-mr07-50-series-r07-tension-compression-force-sensor-50-lbf-250-n","title":"Mark-10 MR07-50 | Series R07 Tension \u0026 Compression Force Sensor | 50 lbF \/ 250 N","description":"\u003cp\u003eMark-10 MR07-50 is a Series R07 force sensor rated at 50 lbF (250 N) for tension and compression measurement on Series F test frames. The MR07-50 fits models F755, F755S, F1505 and F1505S; it is not intended for the F105, F305, F505 or F505H. Because configuration and calibration data for the 50 lbF (250 N) range live inside the sensor, the MR07-50 can be calibrated on the frame or off-site with a Mark-10 indicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eR07 rating of 50 lbF (250 N) in tension and compression\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test sensor: MR07-50 stores its own configuration and calibration data\u003c\/li\u003e\n\u003cli\u003eMR07-50 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eSeries R07 sizing for F755, F755S, F1505 and F1505S frames (50 lbF model)\u003c\/li\u003e\n\u003cli\u003eCalibrate the MR07-50 on the frame or off-site with a Mark-10 indicator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678423665,"sku":"MR07-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr07-50-mr07_mainimg.jpg?v=1791706838"},{"product_id":"mark-10-mr01-200-series-r01-s-beam-force-sensor-200-lbf-1-kn","title":"Mark-10 MR01-200 | Series R01 S-Beam Force Sensor | 200 lbF \/ 1 kN","description":"\u003cp\u003eMeasuring tension and compression up to 200 lbF \/ 1 kN, the Mark-10 MR01-200 uses the S-beam layout of the Series R01 range. The rugged S-beam construction, with threads on two sides, adapts to many test arrangements. Mark-10 indicators, sold separately, connect through Plug \u0026amp; Test; the R01 family spans 50 to 10,000 lbF (250 N to 50 kN).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e200 lbF \/ 1 kN rated S-beam sensor\u003c\/li\u003e\n\u003cli\u003eTension and compression measurement\u003c\/li\u003e\n\u003cli\u003eThreads on two sides for fixtures and attachments\u003c\/li\u003e\n\u003cli\u003eWorks with Mark-10 indicators through Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678456433,"sku":"MR01-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_fa7e18c7-15e0-485b-b373-acba18ea9c03.jpg?v=1791705720"},{"product_id":"mark-10-mr50-20z-series-r50-universal-torque-sensor-20-ozfin-14-ncm","title":"Mark-10 MR50-20Z | Series R50 Universal Torque Sensor | 20 ozFin \/ 14 Ncm","description":"\u003cp\u003eMark-10 MR50-20Z measures torque in both directions up to 20 ozFin (14 Ncm). The MR50-20Z has an integral chuck for samples up to 1\/2 in (12.7 mm), with the maximum depending on capacity. The MR50-20Z can be held by hand or mounted to a torque test stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated chuck on the MR50-20Z, up to 1\/2 in (12.7 mm) depending on capacity\u003c\/li\u003e\n\u003cli\u003eHandheld or stand-mounted use of the 14 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR50-20Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR50-20Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing, 20 ozFin rating\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf the MR50-20Z is ordered with an indicator, Mark-10 offers a combined certificate for the set (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678554737,"sku":"MR50-20Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/R50_updated_a55a34da-a374-484e-b40c-b8cac5a5b343.jpg?v=1791705739"},{"product_id":"mark-10-mr01-500-series-r01-s-beam-force-sensor-500-lbf-2-5-kn","title":"Mark-10 MR01-500 | Series R01 S-Beam Force Sensor | 500 lbF \/ 2.5 kN","description":"\u003cp\u003eThe Mark-10 MR01-500 is a 500 lbF \/ 2.5 kN S-beam smart sensor from Series R01 for measuring tension and compression force. Threaded holes on two sides allow it to be configured in many ways, and the design is used across a broad range of industries. The R01 series covers 50 to 10,000 lbF (250 N to 50 kN) and works with Mark-10 indicators (sold separately) via Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e500 lbF \/ 2.5 kN tension and compression capacity\u003c\/li\u003e\n\u003cli\u003eDurable S-beam design\u003c\/li\u003e\n\u003cli\u003eThreaded holes on two sides\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test interface for Mark-10 indicators\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCalibration: the sensor comes with a NIST-traceable certificate including data, and a joint sensor\/indicator certificate (CERT-SI) is available when ordering.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678587505,"sku":"MR01-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_ab98630c-b169-4e84-b62d-d9367f8e0ca6.jpg?v=1791705743"},{"product_id":"mark-10-mr07-100-series-r07-tension-compression-force-sensor-100-lbf-500-n","title":"Mark-10 MR07-100 | Series R07 Tension \u0026 Compression Force Sensor | 100 lbF \/ 500 N","description":"\u003cp\u003eThe MR07-100 from Mark-10 measures tension and compression up to 100 lbF (500 N) and belongs to the Series R07 range for Series F frames. Compatible frames for the MR07-100 are the F755, F755S, F1505 and F1505S, while the F105, F305, F505 and F505H cannot use it. Because configuration and calibration data for the 100 lbF (500 N) range live inside the sensor, the MR07-100 can be calibrated on the frame or off-site with a Mark-10 indicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; Test sensor: MR07-100 stores its own configuration and calibration data\u003c\/li\u003e\n\u003cli\u003eMR07-100 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eSeries R07 sizing for F755, F755S, F1505 and F1505S frames (100 lbF model)\u003c\/li\u003e\n\u003cli\u003eCalibrate the MR07-100 on the frame or off-site with a Mark-10 indicator\u003c\/li\u003e\n\u003cli\u003eInterchangeable with other Plug \u0026amp; Test sensors and indicators at 500 N\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678620273,"sku":"MR07-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr07-100-mr07_mainimg.jpg?v=1791706840"},{"product_id":"mark-10-mr50-50z-series-r50-universal-torque-sensor-50-ozfin-35-ncm","title":"Mark-10 MR50-50Z | Series R50 Universal Torque Sensor | 50 ozFin \/ 35 Ncm","description":"\u003cp\u003eRated at 50 ozFin (35 Ncm), the MR50-50Z belongs to Mark-10 Series R50. Its chuck accepts samples up to 1\/2 in (12.7 mm) diameter, subject to the capacity of the 50 ozFin model. Use the 50 ozFin sensor handheld or fixed to a torque stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHandheld or stand-mounted use of the 35 Ncm sensor\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR50-50Z works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR50-50Z supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing, 50 ozFin rating\u003c\/li\u003e\n\u003cli\u003eR50 bi-directional capacity: 50 ozFin (35 Ncm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor the 50 ozFin MR50-50Z, a certificate covering sensor and indicator as a pair is available when ordered together (CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678653041,"sku":"MR50-50Z","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/R50_updated_556785d6-9fe6-441e-8a09-073a140c6ffa.jpg?v=1791705757"},{"product_id":"mark-10-mr01-750-series-r01-s-beam-force-sensor-750-lbf-3-75-kn","title":"Mark-10 MR01-750 | Series R01 S-Beam Force Sensor | 750 lbF \/ 3.75 kN","description":"\u003cp\u003eRated at 750 lbF \/ 3.75 kN, the Mark-10 MR01-750 is a rugged Series R01 S-beam sensor for tensile and compressive measurement. Its durable S-beam body has threaded holes on two sides, giving plenty of options for fixturing. Series capacities run from 50 to 10,000 lbF (250 N to 50 kN); indicators are sold separately and connect through Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 750 lbF \/ 3.75 kN\u003c\/li\u003e\n\u003cli\u003eRugged S-beam construction\u003c\/li\u003e\n\u003cli\u003eSupports many mounting configurations\u003c\/li\u003e\n\u003cli\u003eInterchangeable with Mark-10 indicators via Plug \u0026amp; Test\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 includes a NIST-traceable calibration certificate with data for this sensor; a combined sensor-and-indicator certificate (part no. CERT-SI) can be requested at the time of order.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678718577,"sku":"MR01-750","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_a0f89dbb-1805-4bf4-bdc8-28b18e36648b.jpg?v=1791705767"},{"product_id":"mark-10-mr07-200-series-r07-tension-compression-force-sensor-200-lbf-1-kn","title":"Mark-10 MR07-200 | Series R07 Tension \u0026 Compression Force Sensor | 200 lbF \/ 1 kN","description":"\u003cp\u003eRated at 200 lbF (1 kN), the Mark-10 MR07-200 is a Series R07 tension and compression sensor intended for the larger Series F test frames. Use the MR07-200 on an F755, F755S, F1505 or F1505S frame; the F105, F305, F505 and F505H are not compatible. Plug \u0026amp; Test technology keeps the MR07-200 calibration data in the sensor itself, so it can be checked on the test frame or away from it using a Mark-10 indicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMR07-200 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eSeries R07 sizing for F755, F755S, F1505 and F1505S frames (200 lbF model)\u003c\/li\u003e\n\u003cli\u003eCalibrate the MR07-200 on the frame or off-site with a Mark-10 indicator\u003c\/li\u003e\n\u003cli\u003eInterchangeable with other Plug \u0026amp; Test sensors and indicators at 1 kN\u003c\/li\u003e\n\u003cli\u003eR07 rating of 200 lbF (1 kN) in tension and compression\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678751345,"sku":"MR07-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr07-200-mr07_mainimg.jpg?v=1791706843"},{"product_id":"mark-10-mr50-12-series-r50-universal-torque-sensor-12-lbfin-1-35-nm","title":"Mark-10 MR50-12 | Series R50 Universal Torque Sensor | 12 lbFin \/ 1.35 Nm","description":"\u003cp\u003eWith a 12 lbFin (1.35 Nm) capacity, Mark-10 MR50-12 is an R50 bi-directional torque sensor in an aluminium housing. The MR50-12 has an integral chuck for samples up to 1\/2 in (12.7 mm), with the maximum depending on capacity. Use the 12 lbFin sensor handheld or fixed to a torque stand.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug \u0026amp; Test: MR50-12 works with Mark-10 indicators\u003c\/li\u003e\n\u003cli\u003eMR50-12 supplied with a NIST-traceable calibration certificate with data\u003c\/li\u003e\n\u003cli\u003eRugged aluminium housing, 12 lbFin rating\u003c\/li\u003e\n\u003cli\u003eR50 bi-directional capacity: 12 lbFin (1.35 Nm)\u003c\/li\u003e\n\u003cli\u003eIntegrated chuck on the MR50-12, up to 1\/2 in (12.7 mm) depending on capacity\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMark-10 can supply a single certificate for the MR50-12 and its indicator when both are ordered at once (part no. CERT-SI).\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678784113,"sku":"MR50-12","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/R50_updated_d1136c6c-f9af-4e4f-a662-6713db23f267.jpg?v=1791705771"},{"product_id":"mark-10-mr01-1000-series-r01-s-beam-force-sensor-1000-lbf-5-kn","title":"Mark-10 MR01-1000 | Series R01 S-Beam Force Sensor | 1000 lbF \/ 5 kN","description":"\u003cp\u003eWith a capacity of 1000 lbF \/ 5 kN, the Mark-10 MR01-1000 is one of the durable Series R01 S-beam force sensors. Two threaded sides let it be mounted in a number of configurations for general industrial force testing. It sits within an R01 range of 50 to 10,000 lbF (250 N to 50 kN) and pairs with Mark-10 indicators, sold separately, using Plug \u0026amp; Test.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeasures tensile and compressive loads up to 1000 lbF \/ 5 kN\u003c\/li\u003e\n\u003cli\u003eS-beam body with two threaded sides\u003c\/li\u003e\n\u003cli\u003eSuitable for applications across many industries\u003c\/li\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test family\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA NIST-traceable calibration certificate with data ships with the sensor. Mark-10 also offers a combined certificate covering the sensor together with an indicator, ordered as CERT-SI.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678849649,"sku":"MR01-1000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mr01-800x_023f15ad-e5e1-4a7f-b5cd-799443a6d02c.jpg?v=1791705791"},{"product_id":"mark-10-mr07-300-series-r07-tension-compression-force-sensor-300-lbf-1-5-kn","title":"Mark-10 MR07-300 | Series R07 Tension \u0026 Compression Force Sensor | 300 lbF \/ 1.5 kN","description":"\u003cp\u003eWith a 300 lbF (1.5 kN) capacity, Mark-10 MR07-300 is the Series R07 sensor to choose for tension and compression work at this load on a Series F frame. The MR07-300 fits models F755, F755S, F1505 and F1505S; it is not intended for the F105, F305, F505 or F505H. Plug \u0026amp; Test technology keeps the MR07-300 calibration data in the sensor itself, so it can be checked on the test frame or away from it using a Mark-10 indicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeries R07 sizing for F755, F755S, F1505 and F1505S frames (300 lbF model)\u003c\/li\u003e\n\u003cli\u003eCalibrate the MR07-300 on the frame or off-site with a Mark-10 indicator\u003c\/li\u003e\n\u003cli\u003eInterchangeable with other Plug \u0026amp; Test sensors and indicators at 1.5 kN\u003c\/li\u003e\n\u003cli\u003eR07 rating of 300 lbF (1.5 kN) in tension and compression\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Test sensor: MR07-300 stores its own configuration and calibration data\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":67650678882417,"sku":"MR07-300","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-mr07-300-mr07_mainimg.jpg?v=1791706845"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/collections\/VERSA2S100_0221900c-71e6-4f6f-9b81-ea9c5ef8abef.jpg?v=1794370955","url":"https:\/\/www.generaltechshop.sa\/collections\/measurement-force-and-torque-sensors.oembed?page=3","provider":"General Tech Services LLC","version":"1.0","type":"link"}