{"title":"Force Gauges \u0026 Torque Gauges","description":"\u003cp\u003eDiscover a range of digital and mechanical instruments designed for precise force and torque measurement in industrial settings. These devices are essential for quality assurance, product testing, and assembly line operations, helping ensure compliance with industry standards while optimizing manufacturing processes.\u003c\/p\u003e\n\u003cp\u003eUsers benefit from improved equipment uptime, highly accurate readings, and increased operator safety. The intuitive interface and robust construction support efficient workflow and minimize downtime caused by recalibration or tool replacement. Featuring versatile units and adaptable test fixtures, these gauges contribute to a standardized approach for industrial measurements.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eComponent testing during product development and QA processes\u003c\/li\u003e\n  \u003cli\u003eAssembly line torque verification for critical fasteners\u003c\/li\u003e\n  \u003cli\u003eRoutine preventative maintenance for manufacturing equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePossible sub collections: Digital Force Gauges, Mechanical Torque Gauges, Accessories \u0026amp; Calibration Kits.\u003c\/p\u003e","products":[{"product_id":"mark-10-m3-500-series-3-digital-force-gauge-500-lbf-2-500-n","title":"Mark-10 M3-500 | Series 3 Digital Force Gauge | 500 lbF \/ 2,500 N","description":"\u003cp\u003eFor quality checks against programmed force limits up to 500 lbF (2,500 N), the Mark-10 M3-500 offers a Series 3 digital gauge format. It is the highest-capacity model in the Series 3 range, which spans from 0.12 to 500 lbF (0.5 to 2,500 N). The M3-500 measures in both tension and compression and samples at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 500 lbF \/ 2,500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eReal-time load bar graph with set point marks\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points shown at all times\u003c\/li\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic screen\u003c\/li\u003e\n\u003cli\u003eSwitchable between 3 measurement units\u003c\/li\u003e\n\u003cli\u003eConfigurable audio alarms and key tones\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170162675825,"sku":"M3-500","price":0.0,"currency_code":"AED","in_stock":false}]},{"product_id":"mark-10-wt3-201-manual-wire-crimp-pull-tester-200lbf-3200ozf-100kgf-1000-n-1-kn","title":"Mark-10 WT3-201 Manual wire crimp pull tester 200lbF\/3200ozF\/100kgF\/1000 N\/1 kN","description":"\u003cp\u003eThe WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase.A large, backlit graphic LCD displays easy-to-read values, including real-time force, peak force, programmable pass\/fail limits, units of measurement, and more. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. An analog load bar is shown on the display for graphical representation of applied force.On-board data storage for up to 1,000 readings is included, as are statistical calculations and output to a PC. Unique automatic output \/ data storage \/ zeroing upon sample break helps automate testing processes.An optional ring terminal fixture may be used to secure ring terminations, and an optional carrying case makes transportation simple and safe.\u003c\/p\u003e\n","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170162839665,"sku":"WT3-201","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-wire-pull-testers-default-title-mark-10-wt3-201-manual-wire-crimp-pull-tester-200lbf-3200ozf-100kgf-1000-n-1-kn-25381810077809.jpg?v=1761752479"},{"product_id":"mark-10-mtt01-100-series-tt01-cap-torque-tester-100-lbfin-1-150-ncm","title":"Mark-10 MTT01-100 | Series TT01 Cap Torque Tester | 100 lbFin \/ 1,150 Ncm","description":"\u003cp\u003eWith a 100 lbFin (1,150 Ncm) capacity, the Mark-10 MTT01-100 Series TT01 tester quantifies cap application and removal torque. It is the top TT01 capacity, covering caps up to 100 lbFin (11.5 Nm). Optional flat and adjustable jaws handle unusual profiles, and the 1,150 Ncm MTT01-100 reports first and second peaks for slip and breakaway torque.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 100 lbFin \/ 1,150 Ncm\u003c\/li\u003e\n\u003cli\u003eMovable 1.25 in (31 mm) posts; extended posts and other grips available\u003c\/li\u003e\n\u003cli\u003eAutomatic output, storage and zeroing when the cap is removed\u003c\/li\u003e\n\u003cli\u003e7,000 Hz sampling and 1,000-point memory with statistics\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analog outputs\u003c\/li\u003e\n\u003cli\u003eProgrammable pass\/fail set points and password protection\u003c\/li\u003e\n\u003cli\u003e5 selectable units; MESUR Lite software included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163003505,"sku":"MTT01-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-torque-cap-testers-default-title-mark-10-mtt01-100-cap-torque-tester-100-lbfin-1600-ozfin-116-kgfcm-115-ncm-11-5-nm-25381810208881.jpg?v=1761752475"},{"product_id":"mark-10-wt3-201m-motorized-wire-crimp-pull-tester-200lbf-3200ozf-100kgf-1000n-1kn","title":"Mark-10 WT3-201M Motorized wire crimp pull tester 200lbF\/3200ozF\/100kgF\/1000N\/1kN","description":"\u003cp\u003eThe WT3-201M motorized wire crimp pull tester is designed to measure\u003c\/p\u003e\n\n\u003cp\u003epull-off forces of up to 200 lbF [1 kN] for wire and tube terminations.\u003c\/p\u003e\n\n\u003cp\u003eThe tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other\u003c\/p\u003e\n\n\u003cp\u003erequirements for destructive testing. Non-destructive testing is also\u003c\/p\u003e\n\n\u003cp\u003epossible, such as pulling to a load or maintaining a load for a specified\u003c\/p\u003e\n\n\u003cp\u003eperiod of time, as per the requirements of UL 486A\/B. Programmable\u003c\/p\u003e\n\n\u003cp\u003epass\/fail limits with red and green indicators and audio alerts help identify\u003c\/p\u003e\n\n\u003cp\u003enon-conforming samples.\u003c\/p\u003e\n\n\u003cp\u003eThe tester accommodates wire sizes up to AWG 3 (0.25 in [6.3 mm] OD),\u003c\/p\u003e\n\n\u003cp\u003eor custom sizes via the available machinable blank fixture. Auto-start\u003c\/p\u003e\n\n\u003cp\u003eautomatically begins the test when the wire sample has been loaded.\u003c\/p\u003e\n\n\u003cp\u003eWhen the sample breaks, the tester can auto-reverse, output the peak\u003c\/p\u003e\n\n\u003cp\u003eforce, store the peak force, and zero the display automatically, thereby\u003c\/p\u003e\n\n\u003cp\u003eincreasing testing throughput. Further testing efficiency is achieved via\u003c\/p\u003e\n\n\u003cp\u003ethe available Profiles function, through which multiple test setups may be\u003c\/p\u003e\n\n\u003cp\u003esaved and recalled as required.\u003c\/p\u003e\n\n\u003cp\u003eOn-board data storage and statistical calculations is provided for up to\u003c\/p\u003e\n\n\u003cp\u003e2,000 readings, with available date and time stamp for each saved data\u003c\/p\u003e\n\n\u003cp\u003epoint. Data can be transferred to a PC or other data collector via USB,\u003c\/p\u003e\n\n\u003cp\u003eRS-232, Mitutoyo (Digimatic), or analog outputs.\u003c\/p\u003e\n\n\u003cp\u003eThe WT3-201M includes MESURTM Lite data acquisition software.\u003c\/p\u003e\n\n\u003cp\u003eMESURTM Lite tabulates continuous or single point data. One-click export\u003c\/p\u003e\n\n\u003cp\u003eto Excel allows for further data manipulation.\u003c\/p\u003e\n","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163888241,"sku":"WT3-201M","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-wire-pull-testers-default-title-mark-10-wt3-201m-motorized-wire-crimp-pull-tester-200lbf-3200ozf-100kgf-1000n-1kn-25381811912817.jpg?v=1761752465"},{"product_id":"mark-10-mr06-200-wire-crimp-pull-sensor-200-lbf-1-000-n","title":"Mark-10 MR06-200 | Wire Crimp Pull Sensor | 200 lbF (1,000 N)","description":"\u003cp\u003eThe Mark-10 MR06-200 is a hand-operated sensor for measuring the pull-off force of wire crimps, rated to 200 lbF (1,000 N). Squeezing the ergonomic handles tensions the sample until it breaks, and a connected Mark-10 indicator (sold separately) records the peak. A rotating turret with several slot sizes takes wires up to 0.25 in (6.4 mm) in diameter, making it practical for field checks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart of the Plug \u0026amp; Test family of interchangeable sensors and indicators\u003c\/li\u003e\n\u003cli\u003eErgonomic handles with a tensioning mechanism\u003c\/li\u003e\n\u003cli\u003eRotating turret accepts wire up to 0.25 in (6.4 mm)\u003c\/li\u003e\n\u003cli\u003eNIST-traceable calibration certificate with data included\u003c\/li\u003e\n\u003cli\u003eCombined sensor and indicator certificate (CERT-SI) available when ordering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163921009,"sku":"MR06-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-wire-pull-testers-default-title-mark-10-mr06-200-handheld-wire-crimp-pull-tester-25381812043889.jpg?v=1761752465"},{"product_id":"mark-10-mtt01-12-series-tt01-cap-torque-tester-12-lbfin-135-ncm","title":"Mark-10 MTT01-12 | Series TT01 Cap Torque Tester | 12 lbFin \/ 135 Ncm","description":"\u003cp\u003eThe Mark-10 MTT01-12 is a Series TT01 cap torque tester with a 12 lbFin (135 Ncm) capacity, measuring the torque needed to apply and remove bottle caps. It is the lowest-capacity TT01 model, with 25, 50 and 100 lbFin versions also available. Movable 1.25 in (31 mm) posts grip a wide range of container shapes, and the MTT01-12 records first and second peaks for slip and breakaway torque on tamper-evident closures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 12 lbFin \/ 135 Ncm\u003c\/li\u003e\n\u003cli\u003eMovable 1.25 in (31 mm) posts; extended posts and other grips available\u003c\/li\u003e\n\u003cli\u003eAutomatic output, storage and zeroing when the cap is removed\u003c\/li\u003e\n\u003cli\u003e7,000 Hz sampling and 1,000-point memory with statistics\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analog outputs\u003c\/li\u003e\n\u003cli\u003eProgrammable pass\/fail set points and password protection\u003c\/li\u003e\n\u003cli\u003e5 selectable units; MESUR Lite software included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163953777,"sku":"MTT01-12","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-torque-cap-testers-default-title-mark-10-mtt01-12-cap-torque-tester-12-lbfin-192-ozfin-14-kgfcm-135-ncm-1-35-nm-25381812109425.jpg?v=1761752464"},{"product_id":"mark-10-mtt01-50-series-tt01-cap-torque-tester-50-lbfin-570-ncm","title":"Mark-10 MTT01-50 | Series TT01 Cap Torque Tester | 50 lbFin \/ 570 Ncm","description":"\u003cp\u003eMark-10 MTT01-50 is the 50 lbFin model of the Series TT01 cap torque tester, used to check how much torque caps need to tighten and open. The MTT01-50 is one of four TT01 capacities, from 12 to 100 lbFin. Containers are held by movable 1.25 in posts; the rugged aluminium MTT01-50 also detects first and second peaks for tamper-evident closures.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 50 lbFin \/ 570 Ncm\u003c\/li\u003e\n\u003cli\u003e31 mm posts adjust to the container; other gripping options offered\u003c\/li\u003e\n\u003cli\u003eCap removal triggers automatic output, storage and zeroing\u003c\/li\u003e\n\u003cli\u003eHigh-speed 7,000 Hz sampling with 1,000-point memory\u003c\/li\u003e\n\u003cli\u003eConnects via USB, RS-232, Mitutoyo or analog\u003c\/li\u003e\n\u003cli\u003eSet point indicators and outputs; configurable audio alarms\u003c\/li\u003e\n\u003cli\u003eIncludes MESUR Lite software and offers 5 measurement units\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170163986545,"sku":"MTT01-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-torque-cap-testers-default-title-mark-10-mtt01-50-cap-torque-tester-50-lbfin-800-ozfin-58-kgfcm-570-ncm-5-7-nm-25381812830321.jpg?v=1761752463"},{"product_id":"mark-10-mtt01-25-series-tt01-cap-torque-tester-25-lbfin-290-ncm","title":"Mark-10 MTT01-25 | Series TT01 Cap Torque Tester | 25 lbFin \/ 290 Ncm","description":"\u003cp\u003eRated at 290 Ncm (25 lbFin), the Mark-10 MTT01-25 measures application and removal torque on bottle closures in laboratory or production settings. In the TT01 series, which runs from 12 to 100 lbFin, the MTT01-25 is the 25 lbFin option. Its adjustable 31 mm posts hold many container sizes, while first\/second peak detection on the 25 lbFin unit separates slip and breakaway torque on tamper-evident caps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 25 lbFin \/ 290 Ncm\u003c\/li\u003e\n\u003cli\u003eAdjustable posts, with longer posts and alternative grips as options\u003c\/li\u003e\n\u003cli\u003eAuto output, data storage and zeroing on cap removal\u003c\/li\u003e\n\u003cli\u003e1,000-point data memory with statistics; 7,000 Hz sampling\u003c\/li\u003e\n\u003cli\u003eOutputs: USB, RS-232, Mitutoyo, analog\u003c\/li\u003e\n\u003cli\u003ePass\/fail set points, configurable alarms and password protection\u003c\/li\u003e\n\u003cli\u003eMESUR Lite data collection software supplied; 5 units\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164019313,"sku":"MTT01-25","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-torque-cap-testers-default-title-mark-10-mtt01-25-cap-torque-tester-25-lbfin-400-ozfin-28-kgfcm-290-ncm-2-9-nm-25381813223537.jpg?v=1761752463"},{"product_id":"mark-10-m5-2-cof-coefficient-of-friction-gauge-2-lbf-10-n","title":"Mark-10 M5-2-COF | Coefficient of Friction Gauge | 2 lbF (10 N)","description":"\u003cp\u003eThe Mark-10 M5-2-COF is a 2 lbF (10 N) coefficient of friction gauge, normally used with a motorised test stand and COF fixture. It calculates static and kinetic COF directly, and the sled weight can be configured from 100 to 1000 g. A fixture plus gauge kit is also offered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCalculates static and kinetic coefficients of friction\u003c\/li\u003e\n\u003cli\u003eConfigurable sled weight 100–1000 g\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003e1,000-point memory with statistics\u003c\/li\u003e\n\u003cli\u003eProgrammable set points and live load bar graph\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164052081,"sku":"M5-2-COF","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-2-cof-force-gages-cof-gauge-2-lbf-32-ozf-1-kgf-1000-gf-10-n-capacity-force-gauge-25402108641393.webp?v=1761752462"},{"product_id":"mark-10-m5-1500-series-5-digital-force-gauge-1-500-lbf-7-500-n","title":"Mark-10 M5-1500 | Series 5 Digital Force Gauge | 1,500 lbF \/ 7,500 N","description":"\u003cp\u003eThe Mark-10 M5-1500 is a Series 5 digital force gauge with a capacity of 1,500 lbF (7,500 N), intended for demanding tension and compression testing. Within the Series 5 range, which runs from 0.12 to 2,000 lbF, or 0.5 N to 10 kN, the M5-1500 sits at the 1,500 lbF point. Readings from the 1,500 lbF M5-1500 are taken at a 7,000 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 1,500 lbF \/ 7,500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003eAveraging mode calculates mean load over a period\u003c\/li\u003e\n\u003cli\u003eTrigger mode for switch testing and remote display hold\u003c\/li\u003e\n\u003cli\u003eLive load bar graph with set point markers\u003c\/li\u003e\n\u003cli\u003eChoice of 5 units of measurement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164084849,"sku":"M5-1500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-1500-force-gauge-1500-lbf-24000-ozf-750-kgf-7500-n-7-5-kn-capacity-force-gauge-25381813256305.jpg?v=1761752462"},{"product_id":"mark-10-m4-20-series-4-digital-force-gauge-20-lbf-100-n","title":"Mark-10 M4-20 | Series 4 Digital Force Gauge | 20 lbF \/ 100 N","description":"\u003cp\u003eRated at 20 lbF \/ 100 N, the M4-20 handles tension and compression measurements across a wide range of industries. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N). Results can be stored with statistics or sent to a PC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164150385,"sku":"M4-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-20-force-gauge-20-lbf-320-ozf-10-kgf-10000-gf-100-n-capacity-force-gauge-25381813289073.jpg?v=1761752461"},{"product_id":"mark-10-m5-300-series-5-digital-force-gauge-300-lbf-1-500-n","title":"Mark-10 M5-300 | Series 5 Digital Force Gauge | 300 lbF \/ 1,500 N","description":"\u003cp\u003eThe Mark-10 M5-300 is a Series 5 digital force gauge with a capacity of 300 lbF (1,500 N), intended for demanding tension and compression testing. Its 1,500 N rating is one of several capacities in the Series 5 line, which runs from 0.12 to 2,000 lbF, or 0.5 N to 10 kN. The M5-300 measures in both tension and compression and samples at 7,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 300 lbF \/ 1,500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eHigh-speed 7,000 Hz sampling, 500 Hz output rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analog outputs\u003c\/li\u003e\n\u003cli\u003eStores 1,000 readings and calculates statistics\u003c\/li\u003e\n\u003cli\u003eAlarms and outputs triggered by programmable set points\u003c\/li\u003e\n\u003cli\u003eKey and calibration access can be password protected\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164183153,"sku":"M5-300","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-300-force-gauge-300-lbf-4800-ozf-150-kgf-1500-n-1-5-kn-capacity-force-gauge-25381813518449.jpg?v=1761752461"},{"product_id":"mark-10-ek3-500-series-ek3-basic-ergonomics-kit-500-lbf-2500-n","title":"Mark-10 EK3-500 | Series EK3 Basic Ergonomics Kit | 500 lbF \/ 2500 N","description":"\u003cp\u003ePart number EK3-500 is the 500 lbF \/ 2500 N version of the Mark-10 EK3 basic ergonomics kit, intended for job task analysis, workstation design and strength assessment on a budget.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePeak readings and set points always on screen\u003c\/li\u003e\n\u003cli\u003e3 selectable units and configurable audio alarms\u003c\/li\u003e\n\u003cli\u003eComplete kit with force gauge, handles, implements, carrying case and accessories\u003c\/li\u003e\n\u003cli\u003eHigh-speed 2,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB output of continuous or individual data points\u003c\/li\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic display\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164215921,"sku":"EK3-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek3-500-ergonomic-test-kit-w-series-3-force-gage-500-lbf-2500-n-25381813583985.jpg?v=1761752461"},{"product_id":"mark-10-ek3-200-series-ek3-basic-ergonomics-kit-200-lbf-1000-n","title":"Mark-10 EK3-200 | Series EK3 Basic Ergonomics Kit | 200 lbF \/ 1000 N","description":"\u003cp\u003eThe Mark-10 EK3-200 is an EK3 basic ergonomics testing kit with a 200 lbF \/ 1000 N force gauge, supplied with handles, implements, accessories and a carrying case. It is an economical option for job task analysis and ergonomic studies.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete kit with force gauge, handles, implements, carrying case and accessories\u003c\/li\u003e\n\u003cli\u003eHigh-speed 2,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB output of continuous or individual data points\u003c\/li\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic display\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with pass \/ fail indicators\u003c\/li\u003e\n\u003cli\u003eLive load bar graph with set point markers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164248689,"sku":"EK3-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek3-200-ergonomic-test-kit-w-series-3-force-gage-200-lbf-1000-n-25381813649521.jpg?v=1761752460"},{"product_id":"mark-10-m4-10-series-4-digital-force-gauge-10-lbf-50-n","title":"Mark-10 M4-10 | Series 4 Digital Force Gauge | 10 lbF \/ 50 N","description":"\u003cp\u003eThe Mark-10 M4-10 is a Series 4 digital force gauge with a 10 lbF \/ 50 N capacity for tension and compression testing. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164346993,"sku":"M4-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-10-force-gauge-10-lbf-160-ozf-5-kgf-5000-gf-50-n-capacity-force-gauge-25381813911665.jpg?v=1761752459"},{"product_id":"mark-10-ek3-100-series-ek3-basic-ergonomics-kit-100-lbf-500-n","title":"Mark-10 EK3-100 | Series EK3 Basic Ergonomics Kit | 100 lbF \/ 500 N","description":"\u003cp\u003eRated at 100 lbF \/ 500 N, kit EK3-100 is part of the Mark-10 EK3 basic ergonomics series. It bundles a compact force gauge with the handles and implements needed for workplace design and strength assessment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic display\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with pass \/ fail indicators\u003c\/li\u003e\n\u003cli\u003eLive load bar graph with set point markers\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always on screen\u003c\/li\u003e\n\u003cli\u003e3 selectable units and configurable audio alarms\u003c\/li\u003e\n\u003cli\u003eComplete kit with force gauge, handles, implements, carrying case and accessories\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164379761,"sku":"EK3-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek3-100-ergonomic-test-kit-w-series-3-force-gage-100-lbf-500-n-25381813944433.jpg?v=1761752458"},{"product_id":"mark-10-m4-5-series-4-digital-force-gauge-5-lbf-25-n","title":"Mark-10 M4-5 | Series 4 Digital Force Gauge | 5 lbF \/ 25 N","description":"\u003cp\u003ePart number M4-5 is the 5 lbF \/ 25 N member of the Mark-10 Series 4 digital force gauge family, used for tension and compression testing. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164412529,"sku":"M4-5","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-5-force-gauge-5-lbf-80-ozf-2-5-kgf-2500-gf-25-n-capacity-force-gauge-25381814009969.jpg?v=1761752457"},{"product_id":"mark-10-ek5-500-ergonomic-test-kit-w-series-5-force-gage-500-lbf-2500-n","title":"MARK 10 EK5-500 ERGONOMIC TEST KIT W\/SERIES 5 FORCE GAGE| 500 LBF\/2500 N","description":"\u003cp\u003eMark-10 EK5-500 Advanced ergonomics testing kit w\/Series 5 force gauge 500 lbF \/ 2500 N. Mark-10 EK5-500 kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These kits present the ergonomist and other professionals with a simple and economical testing solution. The kit includes a force gauge with data output, MESUR™ Lite data collection software, and a USB cable. The kits are available in 100 lbF (500 N), 200 lbF (1,000 N), and 500 lbF (2,500 N) capacities.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164510833,"sku":"EK5-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek5-500-ergonomic-test-kit-w-series-5-force-gage-500-lbf-2500-n-25402097107057.webp?v=1761752457"},{"product_id":"mark-10-m4-2-series-4-digital-force-gauge-2-lbf-10-n","title":"Mark-10 M4-2 | Series 4 Digital Force Gauge | 2 lbF \/ 10 N","description":"\u003cp\u003eQuality control and production teams use the Mark-10 M4-2 to check tension and compression loads up to 2 lbF \/ 10 N. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N). Readings can be sent via USB, RS-232, Mitutoyo or analogue output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164543601,"sku":"M4-2","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-2-force-gauge-2-lbf-32-ozf-1-kgf-1000-gf-10-n-capacity-force-gauge-25381814403185.jpg?v=1761752456"},{"product_id":"mark-10-m4-05-series-4-digital-force-gauge-0-5-lbf-2-5-n","title":"Mark-10 M4-05 | Series 4 Digital Force Gauge | 0.5 lbF \/ 2.5 N","description":"\u003cp\u003eFor general force testing in production and quality control, the Mark-10 M4-05 measures tension and compression up to 0.5 lbF \/ 2.5 N. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164576369,"sku":"M4-05","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-05-force-gauge-0-5-lbf-8-ozf-250-gf-2-5-n-2500-mn-capacity-force-gauge-25381814468721.jpg?v=1761752456"},{"product_id":"mark-10-ek5-200-ergonomic-test-kit-w-series-5-force-gage-200-lbf-1000-n","title":"MARK 10 EK5-200 ERGONOMIC TEST KIT W\/SERIES 5 FORCE GAGE| 200 LBF\/1000 N","description":"\u003cp\u003eMark-10 EK5-200 Advanced ergonomics testing kit w\/Series 5 force gauge 200 lbF \/ 1000 N. Mark-10 EK5-200 kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These kits present the ergonomist and other professionals with a simple and economical testing solution. The kit includes a force gauge with data output, MESUR™ Lite data collection software, and a USB cable. The kits are available in 100 lbF (500 N), 200 lbF (1,000 N), and 500 lbF (2,500 N) capacities.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164641905,"sku":"EK5-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek5-500-ergonomic-test-kit-w-series-5-force-gage-500-lbf-2500-n-25402097107057.webp?v=1761752457"},{"product_id":"mark-10-ek5-100-ergonomic-test-kit-w-series-5-force-gage-100-lbf-500-n","title":"MARK 10 EK5-100 ERGONOMIC TEST KIT W\/SERIES 5 FORCE GAGE| 100 LBF\/500 N","description":"\u003cp\u003eMark-10 EK5-100 Advanced ergonomics testing kit w\/Series 5 force gauge 100 lbF \/ 500 N. Mark-10 EK5-100 kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These kits present the ergonomist and other professionals with a simple and economical testing solution. The kit includes a force gauge with data output, MESUR™ Lite data collection software, and a USB cable. The kits are available in 100 lbF (500 N), 200 lbF (1,000 N), and 500 lbF (2,500 N) capacities.\u003c\/p\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164674673,"sku":"EK5-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-ek5-100-ergonomic-test-kit-w-series-5-force-gage-100-lbf-500-n-25381815222385.jpg?v=1761752455"},{"product_id":"mark-10-m4-025-series-4-digital-force-gauge-0-25-lbf-1-n","title":"Mark-10 M4-025 | Series 4 Digital Force Gauge | 0.25 lbF \/ 1 N","description":"\u003cp\u003eRated at 0.25 lbF \/ 1 N, the M4-025 handles tension and compression measurements across a wide range of industries. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N). Results can be stored with statistics or sent to a PC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164707441,"sku":"M4-025","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-025-force-gauge-0-25-lbf-4-ozf-100-gf-1-n-1000-mn-capacity-force-gauge-25381815550065.jpg?v=1761752454"},{"product_id":"mark-10-m2-500-series-2-digital-force-gauge-500-lbf-2-500-n","title":"Mark-10 M2-500 | Series 2 Digital Force Gauge | 500 lbF \/ 2,500 N","description":"\u003cp\u003eFor routine force checks in tension and compression up to 500 lbF (2,500 N), the Mark-10 M2-500 offers a Series 2 digital gauge format. It is the highest-capacity model in the Series 2 range, which spans up to 500 lbF (2,500 N). Both push and pull loads up to 2,500 N are captured, with sampling at 500 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 500 lbF \/ 2,500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eCalculates and shows peak readings in both tension and compression\u003c\/li\u003e\n\u003cli\u003eUSB data output, continuous or point by point\u003c\/li\u003e\n\u003cli\u003eThree selectable measurement units\u003c\/li\u003e\n\u003cli\u003eSmall ergonomic body for hand-held use\u003c\/li\u003e\n\u003cli\u003eLoad cell orientation can be swapped by reversing the housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164772977,"sku":"M2-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-500-force-gauge-500-lbf-250-kgf-2500-n-capacity-force-gauge-25381815681137.jpg?v=1761752453"},{"product_id":"mark-10-m4-012-series-4-digital-force-gauge-0-12-lbf-0-5-n","title":"Mark-10 M4-012 | Series 4 Digital Force Gauge | 0.12 lbF \/ 0.5 N","description":"\u003cp\u003eThe Mark-10 M4-012 is a Series 4 digital force gauge with a 0.12 lbF \/ 0.5 N capacity for tension and compression testing. It is the lowest-capacity model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164838513,"sku":"M4-012","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-012-force-gauge-0-12-lbf-2-ozf-50-gf-0-5-n-500-mn-capacity-force-gauge-25381815812209.jpg?v=1761752452"},{"product_id":"mark-10-m2-200-series-2-digital-force-gauge-200-lbf-1-000-n","title":"Mark-10 M2-200 | Series 2 Digital Force Gauge | 200 lbF \/ 1,000 N","description":"\u003cp\u003eMark-10 part number M2-200 is the 200 lbF (1,000 N) model in the Series 2 digital force gauge line, used for entry-level tension and compression measurement. Within the Series 2 range, which runs up to 500 lbF (2,500 N), the M2-200 sits at the 200 lbF point. Readings from the 200 lbF M2-200 are taken at a 500 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 200 lbF \/ 1,000 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eDisplays peak tension and peak compression values\u003c\/li\u003e\n\u003cli\u003eSends individual or continuous readings over USB\u003c\/li\u003e\n\u003cli\u003eSwitchable between 3 units of measurement\u003c\/li\u003e\n\u003cli\u003eRuns on a rechargeable battery or the AC adapter\u003c\/li\u003e\n\u003cli\u003eReversible housing for an alternate load cell orientation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164871281,"sku":"M2-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-200-force-gauge-200-lbf-100-kgf-1000-n-capacity-force-gauge-25381816139889.jpg?v=1761752452"},{"product_id":"mark-10-m5-2000-series-5-digital-force-gauge-2-000-lbf-10-000-n","title":"Mark-10 M5-2000 | Series 5 Digital Force Gauge | 2,000 lbF \/ 10,000 N","description":"\u003cp\u003eRated at 2,000 lbF (10,000 N), the Mark-10 M5-2000 belongs to the Series 5 family of digital force gauges and suits advanced force measurement with data capture. It is the highest-capacity model in the Series 5 range, which spans from 0.12 to 2,000 lbF, or 0.5 N to 10 kN. Both push and pull loads up to 10 kN are captured, with sampling at 7,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 2,000 lbF \/ 10,000 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eIncludes an averaging mode\u003c\/li\u003e\n\u003cli\u003eExternal trigger mode for switch contact testing\u003c\/li\u003e\n\u003cli\u003eBar graph of current load with set point marks\u003c\/li\u003e\n\u003cli\u003eSwitchable between 5 units\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164904049,"sku":"M5-2000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-2000-force-gauge-2000-lbf-32000-ozf-1000-kgf-10000-n-10-kn-capacity-force-gauge-25381816205425.jpg?v=1761752451"},{"product_id":"mark-10-m2-100-series-2-digital-force-gauge-100-lbf-500-n","title":"Mark-10 M2-100 | Series 2 Digital Force Gauge | 100 lbF \/ 500 N","description":"\u003cp\u003eRated at 100 lbF (500 N), the Mark-10 M2-100 belongs to the Series 2 family of digital force gauges and suits straightforward push and pull force testing. Its 500 N rating is one of several capacities in the Series 2 line, which runs up to 500 lbF (2,500 N). The M2-100 measures in both tension and compression and samples at 500 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 100 lbF \/ 500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003ePeak capture in tension and compression\u003c\/li\u003e\n\u003cli\u003eUSB output of continuous data or single readings\u003c\/li\u003e\n\u003cli\u003eBacklit graphic screen that dims automatically\u003c\/li\u003e\n\u003cli\u003eBattery or mains (AC adapter) operation\u003c\/li\u003e\n\u003cli\u003eHousing can be reversed to change load cell orientation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170164936817,"sku":"M2-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-100-force-gauge-100-lbf-50-kgf-500-n-capacity-force-gauge-25381816270961.jpg?v=1761752451"},{"product_id":"mark-10-m5-1000-series-5-digital-force-gauge-1-000-lbf-5-000-n","title":"Mark-10 M5-1000 | Series 5 Digital Force Gauge | 1,000 lbF \/ 5,000 N","description":"\u003cp\u003eFor tension and compression work that needs statistics and multiple outputs up to 1,000 lbF (5,000 N), the Mark-10 M5-1000 offers a Series 5 digital gauge format. Its 5,000 N rating is one of several capacities in the Series 5 line, which runs from 0.12 to 2,000 lbF, or 0.5 N to 10 kN. The M5-1000 measures in both tension and compression and samples at 7,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 1,000 lbF \/ 5,000 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eStores 1,000 readings and calculates statistics\u003c\/li\u003e\n\u003cli\u003eAlarms and outputs triggered by programmable set points\u003c\/li\u003e\n\u003cli\u003eAveraging mode for readings taken over time\u003c\/li\u003e\n\u003cli\u003eExternal trigger input for switch contact tests or freezing the display\u003c\/li\u003e\n\u003cli\u003eReal-time load bar graph showing set points\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165002353,"sku":"M5-1000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-1000-force-gauge-1000-lbf-16000-ozf-500-kgf-5000-n-5-kn-capacity-force-gauge-25381816369265.jpg?v=1761752451"},{"product_id":"mark-10-m2-50-series-2-digital-force-gauge-50-lbf-250-n","title":"Mark-10 M2-50 | Series 2 Digital Force Gauge | 50 lbF \/ 250 N","description":"\u003cp\u003eThe Mark-10 M2-50 is a Series 2 digital force gauge with a capacity of 50 lbF (250 N), intended for basic tension and compression checks. Series 2 gauges cover capacities up to 500 lbF (2,500 N); choose the M2-50 where loads stay within 250 N. Both push and pull loads up to 250 N are captured, with sampling at 500 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 50 lbF \/ 250 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eCalculates and shows peak readings in both tension and compression\u003c\/li\u003e\n\u003cli\u003eConfigurable default mode and unit\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with auto-dimming\u003c\/li\u003e\n\u003cli\u003eRechargeable battery or AC adapter power\u003c\/li\u003e\n\u003cli\u003eLoad cell orientation can be swapped by reversing the housing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165035121,"sku":"M2-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-50-force-gauge-50-lbf-25-kgf-250-n-capacity-force-gauge-25381816664177.jpg?v=1761752450"},{"product_id":"mark-10-m2-20-series-2-digital-force-gauge-20-lbf-100-n","title":"Mark-10 M2-20 | Series 2 Digital Force Gauge | 20 lbF \/ 100 N","description":"\u003cp\u003eFor routine force checks in tension and compression up to 20 lbF (100 N), the Mark-10 M2-20 offers a Series 2 digital gauge format. Within the Series 2 range, which runs up to 500 lbF (2,500 N), the M2-20 sits at the 20 lbF point. Readings from the 20 lbF M2-20 are taken at a 500 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 20 lbF \/ 100 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eUltra-compact, ergonomic housing\u003c\/li\u003e\n\u003cli\u003eUser-configurable start-up unit and measurement mode\u003c\/li\u003e\n\u003cli\u003eLarge graphic display, backlit with auto-dimming\u003c\/li\u003e\n\u003cli\u003eRuns on a rechargeable battery or the AC adapter\u003c\/li\u003e\n\u003cli\u003eReversible housing for an alternate load cell orientation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165231729,"sku":"M2-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-20-force-gauge-20-lbf-10-kgf-100-n-capacity-force-gauge-25381816828017.jpg?v=1761752449"},{"product_id":"mark-10-m2-10-series-2-digital-force-gauge-10-lbf-50-n","title":"Mark-10 M2-10 | Series 2 Digital Force Gauge | 10 lbF \/ 50 N","description":"\u003cp\u003eMark-10 part number M2-10 is the 10 lbF (50 N) model in the Series 2 digital force gauge line, used for entry-level tension and compression measurement. Its 50 N rating is one of several capacities in the Series 2 line, which runs up to 500 lbF (2,500 N). The M2-10 measures in both tension and compression and samples at 500 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 10 lbF \/ 50 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eChoice of 3 measurement units\u003c\/li\u003e\n\u003cli\u003eCompact, ergonomic case\u003c\/li\u003e\n\u003cli\u003eDefault unit and mode can be configured\u003c\/li\u003e\n\u003cli\u003eBacklit graphic screen that dims automatically\u003c\/li\u003e\n\u003cli\u003eBattery or mains (AC adapter) operation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165264497,"sku":"M2-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-10-force-gauge-10-lbf-5-kgf-50-n-capacity-force-gauge-25381816893553.jpg?v=1761752450"},{"product_id":"mark-10-m2-5-series-2-digital-force-gauge-5-lbf-25-n","title":"Mark-10 M2-5 | Series 2 Digital Force Gauge | 5 lbF \/ 25 N","description":"\u003cp\u003eRated at 5 lbF (25 N), the Mark-10 M2-5 belongs to the Series 2 family of digital force gauges and suits straightforward push and pull force testing. Series 2 gauges cover capacities up to 500 lbF (2,500 N); choose the M2-5 where loads stay within 25 N. Both push and pull loads up to 25 N are captured, with sampling at 500 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 5 lbF \/ 25 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eUSB data output, continuous or point by point\u003c\/li\u003e\n\u003cli\u003eThree selectable measurement units\u003c\/li\u003e\n\u003cli\u003eSmall ergonomic body for hand-held use\u003c\/li\u003e\n\u003cli\u003eConfigurable default mode and unit\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with auto-dimming\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165297265,"sku":"M2-5","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-5-force-gauge-5-lbf-2-5-kgf-25-n-capacity-force-gauge-25381817057393.jpg?v=1761752447"},{"product_id":"mark-10-m5-100-series-5-digital-force-gauge-100-lbf-500-n","title":"Mark-10 M5-100 | Series 5 Digital Force Gauge | 100 lbF \/ 500 N","description":"\u003cp\u003eMark-10 part number M5-100 is the 100 lbF (500 N) model in the Series 5 digital force gauge line, used for production and laboratory force testing. Within the Series 5 range, which runs from 0.12 to 2,000 lbF, or 0.5 N to 10 kN, the M5-100 sits at the 100 lbF point. Readings from the 100 lbF M5-100 are taken at a 7,000 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 100 lbF \/ 500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003e7,000 Hz sampling with 500 Hz data output rate\u003c\/li\u003e\n\u003cli\u003eOutputs: USB, RS-232, Mitutoyo and analog\u003c\/li\u003e\n\u003cli\u003eLive load bar graph with set point markers\u003c\/li\u003e\n\u003cli\u003eChoice of 5 units of measurement\u003c\/li\u003e\n\u003cli\u003eConfigurable password protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165330033,"sku":"M5-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-100-force-gauge-100-lbf-1600-ozf-50-kgf-50000-gf-500-n-capacity-force-gauge-25381817286769.jpg?v=1761752447"},{"product_id":"mark-10-m2-2-series-2-digital-force-gauge-2-lbf-10-n","title":"Mark-10 M2-2 | Series 2 Digital Force Gauge | 2 lbF \/ 10 N","description":"\u003cp\u003eThe Mark-10 M2-2 is a Series 2 digital force gauge with a capacity of 2 lbF (10 N), intended for basic tension and compression checks. It is the lowest-capacity model in the Series 2 range, which spans up to 500 lbF (2,500 N). Readings from the 2 lbF M2-2 are taken at a 500 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 2 lbF \/ 10 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eDisplays peak tension and peak compression values\u003c\/li\u003e\n\u003cli\u003eSends individual or continuous readings over USB\u003c\/li\u003e\n\u003cli\u003eSwitchable between 3 units of measurement\u003c\/li\u003e\n\u003cli\u003eUltra-compact, ergonomic housing\u003c\/li\u003e\n\u003cli\u003eUser-configurable start-up unit and measurement mode\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165362801,"sku":"M2-2","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m2-2-force-gauge-2-lbf-1-kgf-10-n-capacity-force-gauge-25381818171505.jpg?v=1761752446"},{"product_id":"mark-10-m5-50-series-5-digital-force-gauge-50-lbf-250-n","title":"Mark-10 M5-50 | Series 5 Digital Force Gauge | 50 lbF \/ 250 N","description":"\u003cp\u003eRated at 50 lbF (250 N), the Mark-10 M5-50 belongs to the Series 5 family of digital force gauges and suits advanced force measurement with data capture. Its 250 N rating is one of several capacities in the Series 5 line, which runs from 0.12 to 2,000 lbF, or 0.5 N to 10 kN. The M5-50 measures in both tension and compression and samples at 7,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 50 lbF \/ 250 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eHigh-speed 7,000 Hz sampling, 500 Hz output rate\u003c\/li\u003e\n\u003cli\u003eExternal trigger input for switch contact tests or freezing the display\u003c\/li\u003e\n\u003cli\u003eReal-time load bar graph showing set points\u003c\/li\u003e\n\u003cli\u003eFive selectable measurement units\u003c\/li\u003e\n\u003cli\u003eKey and calibration access can be password protected\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165395569,"sku":"M5-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-50-force-gauge-50-lbf-800-ozf-25-kgf-25000-gf-250-n-capacity-force-gauge-25381818269809.jpg?v=1761752446"},{"product_id":"mark-10-m3-200-series-3-digital-force-gauge-200-lbf-1-000-n","title":"Mark-10 M3-200 | Series 3 Digital Force Gauge | 200 lbF \/ 1,000 N","description":"\u003cp\u003eMark-10 part number M3-200 is the 200 lbF (1,000 N) model in the Series 3 digital force gauge line, used for general tension and compression measurement. Series 3 gauges cover capacities from 0.12 to 500 lbF (0.5 to 2,500 N); choose the M3-200 where loads stay within 1,000 N. Both push and pull loads up to 1,000 N are captured, with sampling at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 200 lbF \/ 1,000 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with pass\/fail indicators\u003c\/li\u003e\n\u003cli\u003eBar graph of current load with set point markers\u003c\/li\u003e\n\u003cli\u003eAlways-visible peak readings and set points\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display in an ultra-compact body\u003c\/li\u003e\n\u003cli\u003eChoice of 3 units of measurement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165461105,"sku":"M3-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-200-force-gauge-200-lbf-100-kgf-1000-n-capacity-force-gauge-25381818368113.jpg?v=1761752445"},{"product_id":"mark-10-m5-20-series-5-digital-force-gauge-20-lbf-100-n","title":"Mark-10 M5-20 | Series 5 Digital Force Gauge | 20 lbF \/ 100 N","description":"\u003cp\u003eThe Mark-10 M5-20 is a Series 5 digital force gauge with a capacity of 20 lbF (100 N), intended for demanding tension and compression testing. Series 5 gauges cover capacities from 0.12 to 2,000 lbF, or 0.5 N to 10 kN; choose the M5-20 where loads stay within 100 N. Both push and pull loads up to 100 N are captured, with sampling at 7,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 20 lbF \/ 100 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eIncludes an averaging mode\u003c\/li\u003e\n\u003cli\u003eExternal trigger mode for switch contact testing\u003c\/li\u003e\n\u003cli\u003eBar graph of current load with set point marks\u003c\/li\u003e\n\u003cli\u003eSwitchable between 5 units\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165493873,"sku":"M5-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m5-20-force-gauge-20-lbf-320-ozf-10-kgf-10000-gf-100-n-capacity-force-gauge-25381818663025.jpg?v=1761752445"},{"product_id":"mark-10-m3-100-series-3-digital-force-gauge-100-lbf-500-n","title":"Mark-10 M3-100 | Series 3 Digital Force Gauge | 100 lbF \/ 500 N","description":"\u003cp\u003eRated at 100 lbF (500 N), the Mark-10 M3-100 belongs to the Series 3 family of digital force gauges and suits push and pull testing where set points are needed. Within the Series 3 range, which runs from 0.12 to 500 lbF (0.5 to 2,500 N), the M3-100 sits at the 100 lbF point. Readings from the 100 lbF M3-100 are taken at a 2,000 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 100 lbF \/ 500 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eContinuous or individual readings sent via USB\u003c\/li\u003e\n\u003cli\u003eSet points can be programmed for pass\/fail checks\u003c\/li\u003e\n\u003cli\u003eLive load bar graph showing set point markers\u003c\/li\u003e\n\u003cli\u003ePeak values and set points remain on screen\u003c\/li\u003e\n\u003cli\u003eCompact housing with a large backlit display\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170165657713,"sku":"M3-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-100-force-gauge-100-lbf-50-kgf-500-n-capacity-force-gauge-25381818728561.jpg?v=1761752445"},{"product_id":"mark-10-m3-50-series-3-digital-force-gauge-50-lbf-250-n","title":"Mark-10 M3-50 | Series 3 Digital Force Gauge | 50 lbF \/ 250 N","description":"\u003cp\u003eThe Mark-10 M3-50 is a Series 3 digital force gauge with a capacity of 50 lbF (250 N), intended for tension and compression testing with pass\/fail checks. Its 250 N rating is one of several capacities in the Series 3 line, which runs from 0.12 to 500 lbF (0.5 to 2,500 N). The M3-50 measures in both tension and compression and samples at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 50 lbF \/ 250 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eSamples at 2,000 Hz\u003c\/li\u003e\n\u003cli\u003eUSB output of continuous data or single readings\u003c\/li\u003e\n\u003cli\u003ePass\/fail indication from programmable set points\u003c\/li\u003e\n\u003cli\u003eReal-time load bar graph with set point marks\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points shown at all times\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166509681,"sku":"M3-50","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-50-force-gauge-50-lbf-25-kgf-250-n-capacity-force-gauge-25381818859633.jpg?v=1761752444"},{"product_id":"mark-10-m3-20-series-3-digital-force-gauge-20-lbf-100-n","title":"Mark-10 M3-20 | Series 3 Digital Force Gauge | 20 lbF \/ 100 N","description":"\u003cp\u003eFor quality checks against programmed force limits up to 20 lbF (100 N), the Mark-10 M3-20 offers a Series 3 digital gauge format. Series 3 gauges cover capacities from 0.12 to 500 lbF (0.5 to 2,500 N); choose the M3-20 where loads stay within 100 N. Both push and pull loads up to 100 N are captured, with sampling at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 20 lbF \/ 100 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eHigh-speed sampling at 2,000 Hz\u003c\/li\u003e\n\u003cli\u003eUSB data output, continuous or point by point\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with pass\/fail indicators\u003c\/li\u003e\n\u003cli\u003eBar graph of current load with set point markers\u003c\/li\u003e\n\u003cli\u003eAdjustable alarm and key tone settings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166575217,"sku":"M3-20","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-20-force-gauge-20-lbf-10-kgf-100-n-capacity-force-gauge-25381819089009.jpg?v=1761752442"},{"product_id":"mark-10-m3-10-series-3-digital-force-gauge-10-lbf-50-n","title":"Mark-10 M3-10 | Series 3 Digital Force Gauge | 10 lbF \/ 50 N","description":"\u003cp\u003eMark-10 part number M3-10 is the 10 lbF (50 N) model in the Series 3 digital force gauge line, used for general tension and compression measurement. Within the Series 3 range, which runs from 0.12 to 500 lbF (0.5 to 2,500 N), the M3-10 sits at the 10 lbF point. Readings from the 10 lbF M3-10 are taken at a 2,000 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 10 lbF \/ 50 N in tension and compression\u003c\/li\u003e\n\u003cli\u003e2,000 Hz sampling for fast readings\u003c\/li\u003e\n\u003cli\u003eContinuous or individual readings sent via USB\u003c\/li\u003e\n\u003cli\u003eSet points can be programmed for pass\/fail checks\u003c\/li\u003e\n\u003cli\u003eThree selectable measurement units\u003c\/li\u003e\n\u003cli\u003eAudio alarms and key tones can be configured\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166607985,"sku":"M3-10","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-10-force-gauge-10-lbf-5-kgf-50-n-capacity-force-gauge-25381819187313.jpg?v=1761752442"},{"product_id":"mark-10-m3-5-series-3-digital-force-gauge-5-lbf-25-n","title":"Mark-10 M3-5 | Series 3 Digital Force Gauge | 5 lbF \/ 25 N","description":"\u003cp\u003eRated at 5 lbF (25 N), the Mark-10 M3-5 belongs to the Series 3 family of digital force gauges and suits push and pull testing where set points are needed. Its 25 N rating is one of several capacities in the Series 3 line, which runs from 0.12 to 500 lbF (0.5 to 2,500 N). The M3-5 measures in both tension and compression and samples at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 5 lbF \/ 25 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eSamples at 2,000 Hz\u003c\/li\u003e\n\u003cli\u003eUSB output of continuous data or single readings\u003c\/li\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic screen\u003c\/li\u003e\n\u003cli\u003eSwitchable between 3 measurement units\u003c\/li\u003e\n\u003cli\u003eConfigurable audio alarms and key tones\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166640753,"sku":"M3-5","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-5-force-gauge-5-lbf-2-5-kgf-25-n-capacity-force-gauge-25381819449457.jpg?v=1761752441"},{"product_id":"mark-10-m3-2-series-3-digital-force-gauge-2-lbf-10-n","title":"Mark-10 M3-2 | Series 3 Digital Force Gauge | 2 lbF \/ 10 N","description":"\u003cp\u003eThe Mark-10 M3-2 is a Series 3 digital force gauge with a capacity of 2 lbF (10 N), intended for tension and compression testing with pass\/fail checks. Series 3 gauges cover capacities from 0.12 to 500 lbF (0.5 to 2,500 N); choose the M3-2 where loads stay within 10 N. Both push and pull loads up to 10 N are captured, with sampling at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 2 lbF \/ 10 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eHigh-speed sampling at 2,000 Hz\u003c\/li\u003e\n\u003cli\u003eAlways-visible peak readings and set points\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display in an ultra-compact body\u003c\/li\u003e\n\u003cli\u003eChoice of 3 units of measurement\u003c\/li\u003e\n\u003cli\u003eAdjustable alarm and key tone settings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166673521,"sku":"M3-2","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-2-force-gauge-2-lbf-1-kgf-10-n-capacity-force-gauge-25381819809905.jpg?v=1761752441"},{"product_id":"mark-10-m3-05-series-3-digital-force-gauge-0-5-lbf-2-5-n","title":"Mark-10 M3-05 | Series 3 Digital Force Gauge | 0.5 lbF \/ 2.5 N","description":"\u003cp\u003eMark-10 part number M3-05 is the 0.5 lbF (2.5 N) model in the Series 3 digital force gauge line, used for general tension and compression measurement. Its 2.5 N rating is one of several capacities in the Series 3 line, which runs from 0.12 to 500 lbF (0.5 to 2,500 N). The M3-05 measures in both tension and compression and samples at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 0.5 lbF \/ 2.5 N in tension and compression\u003c\/li\u003e\n\u003cli\u003ePass\/fail indication from programmable set points\u003c\/li\u003e\n\u003cli\u003eReal-time load bar graph with set point marks\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points shown at all times\u003c\/li\u003e\n\u003cli\u003eUltra-compact gauge with a large backlit graphic screen\u003c\/li\u003e\n\u003cli\u003eSwitchable between 3 measurement units\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166706289,"sku":"M3-05","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-05-force-gauge-0-5-lbf-250-gf-2-5-n-capacity-force-gauge-25381820039281.jpg?v=1761752441"},{"product_id":"mark-10-m3-025-series-3-digital-force-gauge-0-25-lbf-1-n","title":"Mark-10 M3-025 | Series 3 Digital Force Gauge | 0.25 lbF \/ 1 N","description":"\u003cp\u003eRated at 0.25 lbF (1 N), the Mark-10 M3-025 belongs to the Series 3 family of digital force gauges and suits push and pull testing where set points are needed. Series 3 gauges cover capacities from 0.12 to 500 lbF (0.5 to 2,500 N); choose the M3-025 where loads stay within 1 N. Both push and pull loads up to 1 N are captured, with sampling at 2,000 Hz.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 0.25 lbF \/ 1 N in tension and compression\u003c\/li\u003e\n\u003cli\u003eUSB data output, continuous or point by point\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with pass\/fail indicators\u003c\/li\u003e\n\u003cli\u003eBar graph of current load with set point markers\u003c\/li\u003e\n\u003cli\u003eAlways-visible peak readings and set points\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display in an ultra-compact body\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166739057,"sku":"M3-025","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-025-force-gauge-0-25-lbf-100-gf-1-n-capacity-force-gauge-25381820170353.jpg?v=1761752440"},{"product_id":"mark-10-m3-012-series-3-digital-force-gauge-0-12-lbf-0-5-n","title":"Mark-10 M3-012 | Series 3 Digital Force Gauge | 0.12 lbF \/ 0.5 N","description":"\u003cp\u003eThe Mark-10 M3-012 is a Series 3 digital force gauge with a capacity of 0.12 lbF (0.5 N), intended for tension and compression testing with pass\/fail checks. It is the lowest-capacity model in the Series 3 range, which spans from 0.12 to 500 lbF (0.5 to 2,500 N). Readings from the 0.12 lbF M3-012 are taken at a 2,000 Hz sampling rate in tension or compression.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 0.12 lbF \/ 0.5 N in tension and compression\u003c\/li\u003e\n\u003cli\u003e2,000 Hz sampling for fast readings\u003c\/li\u003e\n\u003cli\u003eContinuous or individual readings sent via USB\u003c\/li\u003e\n\u003cli\u003eSet points can be programmed for pass\/fail checks\u003c\/li\u003e\n\u003cli\u003eLive load bar graph showing set point markers\u003c\/li\u003e\n\u003cli\u003ePeak values and set points remain on screen\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166771825,"sku":"M3-012","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m3-012-force-gauge-0-12-lbf-50-gf-0-5-n-capacity-force-gauge-25381820891249.jpg?v=1761752440"},{"product_id":"mark-10-m4-500-series-4-digital-force-gauge-500-lbf-2500-n","title":"Mark-10 M4-500 | Series 4 Digital Force Gauge | 500 lbF \/ 2500 N","description":"\u003cp\u003ePart number M4-500 is the 500 lbF \/ 2500 N member of the Mark-10 Series 4 digital force gauge family, used for tension and compression testing. It is the highest-capacity model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166804593,"sku":"M4-500","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-500-force-gauge-500-lbf-8000-ozf-250-kgf-2500-n-2-5-kn-capacity-force-gauge-25381820989553.jpg?v=1761752439"},{"product_id":"mark-10-m4-200-series-4-digital-force-gauge-200-lbf-1000-n","title":"Mark-10 M4-200 | Series 4 Digital Force Gauge | 200 lbF \/ 1000 N","description":"\u003cp\u003eQuality control and production teams use the Mark-10 M4-200 to check tension and compression loads up to 200 lbF \/ 1000 N. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N). Readings can be sent via USB, RS-232, Mitutoyo or analogue output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003cli\u003eUSB, RS-232, Mitutoyo and analogue outputs\u003c\/li\u003e\n\u003cli\u003eLarge backlit graphic display with live load bar graph and set point markers\u003c\/li\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166837361,"sku":"M4-200","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-200-force-gauge-200-lbf-3200-ozf-100-kgf-1000-n-1-kn-capacity-force-gauge-25381821153393.jpg?v=1761752437"},{"product_id":"mark-10-m4-100-series-4-digital-force-gauge-100-lbf-500-n","title":"Mark-10 M4-100 | Series 4 Digital Force Gauge | 100 lbF \/ 500 N","description":"\u003cp\u003eFeaturing a 3,000 Hz sampling rate and a backlit graphic display, the M4-100 is a 100 lbF \/ 500 N Mark-10 Series 4 gauge for push (compression) and pull (tension) tests. It is a mid-range model in a series covering 0.12 to 500 lbF (0.5 to 2500 N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50-point memory with min, max, mean and standard deviation\u003c\/li\u003e\n\u003cli\u003eProgrammable set points with alarms and outputs\u003c\/li\u003e\n\u003cli\u003ePeak readings and set points always displayed\u003c\/li\u003e\n\u003cli\u003e5 selectable units of measurement\u003c\/li\u003e\n\u003cli\u003ePassword protection for individual keys and calibration\u003c\/li\u003e\n\u003cli\u003eHigh-speed 3,000 Hz sampling rate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mark 10","offers":[{"title":"Default Title","offer_id":42170166902897,"sku":"M4-100","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mark-10-force-gauges-default-title-mark-10-m4-100-force-gauge-100-lbf-1600-ozf-50-kgf-50000-gf-500-n-capacity-force-gauge-25381821251697.jpg?v=1761752437"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/collections\/force_gauge_torque_gauge.jpg?v=1755321655","url":"https:\/\/www.generaltechshop.sa\/collections\/force-gauges-torque-gauges.oembed?page=2","provider":"General Tech Services LLC","version":"1.0","type":"link"}