{"title":"FEMA","description":null,"products":[{"product_id":"fema-overpressure-switches-and-monitors-dcm-dnm-series","title":"FEMA DCM\/DNM | Overpressure Switches and Monitors | G1\/4 + G1\/2, -25 to 70 °C, SIL 2","description":"\u003cp\u003eThe FEMA DCM\/DNM series covers overpressure switches and pressure monitors for general mechanical engineering, printing machines, pneumatics and hydraulics. Units work over an ambient range of -25 to 70 °C and connect through a G1\/4 internal or G1\/2 external thread. On DCM types the switching differential is fixed, while DCMV types allow it to be set from outside with a screwdriver.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBellows sensing technology with wide pressure ranges\u003c\/li\u003e\n\u003cli\u003eCalibrated for falling pressure; the reset point sits higher by the switching differential\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch rated 5 A inductive \/ 8 A resistive\u003c\/li\u003e\n\u003cli\u003eHousing of seawater-resistant die-cast aluminium GD AlSi12\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138073882737,"sku":"DCM-DNM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dnm025-left.jpg?v=1793554618"},{"product_id":"fema-differential-pressure-switches-ddcm-series","title":"FEMA DDCM | Differential Pressure Switches | G1\/4, -25 to 70 °C, SIL 2","description":"\u003cp\u003eFEMA DDCM differential pressure switches monitor and control pressure differences, for example in flow monitoring and automatic filter control. A double-chamber system with stainless steel bellows or a Perbunan diaphragm compares the two applied pressures, and the switching point is continuously adjustable. The series also works in the vacuum range and is rated for -25 to 70 °C ambient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eG1\/4 internal thread connections: P (+) high pressure, S (-) low pressure\u003c\/li\u003e\n\u003cli\u003eMounts directly on the pressure line or on a flat surface with two 4 mm screws\u003c\/li\u003e\n\u003cli\u003eFixed switching differential; calibrated for falling pressure\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 5 A inductive \/ 8 A resistive\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium GD AlSi12 housing, SIL 2 to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138082074737,"sku":"DDCM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ddcm1-left.jpg?v=1793554619"},{"product_id":"fema-stainless-steel-pressure-and-vacuum-switches-dns-vns-series","title":"FEMA DNS\/VNS | Stainless Steel Pressure and Vacuum Switches | 1.4571 sensor, -25 to 70 °C, SIL 2","description":"\u003cp\u003eFEMA DNS pressure switches and VNS vacuum switches use a sensor system made entirely of 1.4571 stainless steel, plasma-welded without gaskets or filler metal. They suit chemical plants and process engineering where aggressive liquids and gases at -25 to 70 °C must be monitored. Types -201 have a fixed differential, -203 an adjustable one, and -351 are chemical versions with a protected switch housing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGasket-free, plasma-welded 1.4571 stainless steel sensor\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal \/ G1\/2 external pressure connection\u003c\/li\u003e\n\u003cli\u003eElectrical connection by plug to DIN EN 175301\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 5 A inductive \/ 8 A resistive\u003c\/li\u003e\n\u003cli\u003eCalibrated for falling pressure; SIL 2 to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138082107505,"sku":"DNS-VNS-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-vns111-201-left.jpg?v=1793554620"},{"product_id":"fema-differential-pressure-switch-for-liquid-and-gas-dpsl-series","title":"FEMA DPSL | Differential Pressure Switch for Liquid and Gas | G1\/8 female, -10 to 80 °C","description":"\u003cp\u003eThe FEMA DPSL is a differential pressure switch that can also act as a vacuum or overpressure switch on neutral and slightly aggressive liquids and non-flammable gases. Fitted across an orifice plate, it can serve as a flow switch. It is listed for an ambient range of -10 to 80 °C with G1\/8 (DIN 259) or 1\/8 in BSP female threaded ports.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDifferential, vacuum and overpressure switching in one device\u003c\/li\u003e\n\u003cli\u003eHandles neutral and slightly aggressive liquids and non-flammable gases\u003c\/li\u003e\n\u003cli\u003eCan be used as a flow switch across an orifice plate\u003c\/li\u003e\n\u003cli\u003eG1\/8 (DIN 259) \/ 1\/8 in BSP female thread connections\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138082140273,"sku":"DPSL-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dpsl200-left.jpg?v=1793554621"},{"product_id":"fema-steam-and-hot-water-pressure-monitors-dwam-dwamv-series","title":"FEMA DWAM\/DWAMV | Steam and Hot-Water Pressure Monitors | PED 2014\/68\/EU, burst \u003e= 100 bar, SIL 2","description":"\u003cp\u003eFEMA DWAM and DWAMV pressure monitors handle maximum-pressure monitoring in steam and hot-water systems to TRBS, DIN EN 12828, DIN EN 12952-11 and DIN EN 12953-9. The special-construction switch has a self-monitoring pressure sensor built to the Pressure Equipment Directive 2014\/68\/EU, with a TÜV-verified bursting pressure of at least 100 bar. DWAM types have no differential adjustment; DWAMV types do.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSelf-monitoring sensor of special construction\u003c\/li\u003e\n\u003cli\u003eCalibrated so switching occurs at the set point under rising pressure\u003c\/li\u003e\n\u003cli\u003eUsable as pressure monitor or maximum-pressure limiter\u003c\/li\u003e\n\u003cli\u003eRugged housing of seawater-resistant die-cast aluminium\u003c\/li\u003e\n\u003cli\u003eTÜV-DW-15-132 approval and SIL 2 to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138082173041,"sku":"DWAM-DWAMV-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dwam16-left.jpg?v=1793554622"},{"product_id":"fema-pressure-monitors-and-limiters-dwr-series","title":"FEMA DWR | Pressure Monitors and Limiters | 2 million cycles, burst \u003e= 100 bar, SIL 2","description":"\u003cp\u003eFEMA DWR pressure monitors and limiters watch maximum and minimum pressure on fuel gases to DVGW G 260, liquid fuels such as fuel oil, steam systems to TRD 604 and hot-water systems to DIN EN 12828. The special-construction sensor has been tested over 2 million operating cycles, and bursting pressure for all types is at least 100 bar. On DWR-203 versions the switching differential is adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCalibrated for rising pressure; reset point lower by the switching differential\u003c\/li\u003e\n\u003cli\u003eBasic calibration retained when the differential is adjusted (-203)\u003c\/li\u003e\n\u003cli\u003eSeawater-resistant die-cast aluminium housing\u003c\/li\u003e\n\u003cli\u003eCE-0085CL0343 to DIN EN 1854 and TÜV approval\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138090365041,"sku":"DWR-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dwr6-306-left.jpg?v=1793554623"},{"product_id":"fema-atex-overpressure-switches-ex-dcm-ex-dnm-series","title":"FEMA Ex-DCM\/Ex-DNM | ATEX Overpressure Switches | ATEX + IECEx, -20 to 60 °C, SIL 2","description":"\u003cp\u003eFEMA Ex-DCM and Ex-DNM switches are the explosion-protected versions of the DCM\/DNM overpressure range for mechanical engineering, pneumatics and hydraulics. They are certified IBExU12ATEX1040 to ATEX 2014\/34\/EU and IECEx IBE 14.0077, and are rated for -20 to 60 °C ambient. Ex-DCM types have a fixed switching differential, Ex-DNM types an adjustable one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSPDT microswitch, 2 A inductive \/ 3 A resistive\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal \/ G1\/2 external pressure connection\u003c\/li\u003e\n\u003cli\u003eCalibrated for falling pressure; the reset point is higher by the switching differential\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium GD AlSi12 housing, seawater resistant\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138090397809,"sku":"EX-DCM-EX-DNM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-ex-dnm10-ex-pressure-switch-primaryimage.jpg?v=1793554623"},{"product_id":"fema-atex-differential-pressure-switches-ex-ddcm-series","title":"FEMA Ex-DDCM | ATEX Differential Pressure Switches | ATEX + IECEx, G1\/4, SIL 2","description":"\u003cp\u003eFEMA Ex-DDCM differential pressure switches bring the DDCM double-chamber principle to explosive atmospheres, with ATEX 2014\/34\/EU certificate IBExU12ATEX1040 and IECEx IBE 14.0077. Stainless steel bellows or a Perbunan diaphragm sense the difference between two pressures for flow monitoring and filter control, including in the vacuum range. Rated ambient is -20 to 60 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContinuously adjustable switching pressure; fixed differential\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal ports: P (+) high, S (-) low pressure\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 2 A inductive \/ 3 A resistive\u003c\/li\u003e\n\u003cli\u003eLine or flat-surface mounting with two 4 mm screws\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138090430577,"sku":"EX-DDCM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-ex-differential-pressure-switch-primaryimage.jpg?v=1793554624"},{"product_id":"fema-atex-gas-pressure-monitors-ex-dgm-series","title":"FEMA Ex-DGM | ATEX Gas Pressure Monitors | DIN EN 1854, ATEX, SIL 2","description":"\u003cp\u003eFEMA Ex-DGM pressure monitors are DVGW-tested to DIN EN 1854 for all gases covered by DVGW worksheet G260 and for air, with explosion protection certified IBExU12ATEX1040 to ATEX 2014\/34\/EU. FEMA offers the Ex-DGM as the Ex-application counterpart to its standard DGM fuel-gas monitor, for maximum or minimum gas pressure. Switching differentials depend largely on the set switching pressure and are not adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCalibrated for rising pressure; reset point lower by the differential\u003c\/li\u003e\n\u003cli\u003eFor maximum and minimum pressure monitoring\u003c\/li\u003e\n\u003cli\u003eSeawater-resistant die-cast aluminium GD AlSi12 housing\u003c\/li\u003e\n\u003cli\u003eCE-0085 AQ 1088 approval\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138090463345,"sku":"EX-DGM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-ex-dgm525-s-ex-dgm-series-pressure-monitor-for-burnable-gas-primaryimage.jpg?v=1793554625"},{"product_id":"fema-atex-stainless-pressure-and-vacuum-switches-ex-dns-ex-vns-series","title":"FEMA Ex-DNS\/Ex-VNS | ATEX Stainless Pressure and Vacuum Switches | 1.4571 sensor, ATEX + IECEx","description":"\u003cp\u003eFEMA Ex-DNS pressure switches and Ex-VNS vacuum switches pair a gasket-free, plasma-welded 1.4571 stainless steel sensor with ATEX (IBExU12ATEX1040) and IECEx (IBE 14.0077) explosion protection. They are intended for aggressive liquids and gases in chemical plants and process engineering at -20 to 60 °C ambient. The switching differential is not adjustable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll sensor parts in 1.4571 stainless steel, welded without filler metal\u003c\/li\u003e\n\u003cli\u003eChromated, stove-enamelled GD AlSi12 housing; no surface change after a 20-day 3% saline test\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 2 A inductive \/ 3 A resistive\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal \/ G1\/2 external connection\u003c\/li\u003e\n\u003cli\u003eCalibrated for falling pressure; SIL 2 to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138098655345,"sku":"EX-DNS-EX-VNS-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-pressure-monitor-primaryimage.jpg?v=1793554626"},{"product_id":"fema-atex-pressure-monitors-and-limiters-ex-dwr-series","title":"FEMA Ex-DWR | ATEX Pressure Monitors and Limiters | ATEX + IECEx, -20 to 60 °C, SIL 2","description":"\u003cp\u003eFEMA Ex-DWR units are explosion-protected pressure monitors and limiters for fuel gases to DVGW G 260, liquid fuels, steam systems to TRD 604 and hot-water systems to DIN EN 12828. The sensor has been tested over 2 million cycles and all types have a TÜV-verified bursting pressure of at least 100 bar. They are rated for -20 to 60 °C and carry ATEX and IECEx certificates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCalibrated for rising pressure, for maximum and minimum monitoring\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 2 A inductive \/ 3 A resistive\u003c\/li\u003e\n\u003cli\u003eMounts on the pressure line or a flat surface\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal \/ G1\/2 external connection\u003c\/li\u003e\n\u003cli\u003eIBExU12ATEX1040, IECEx IBE 14.0077 and SIL 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138098688113,"sku":"EX-DWR-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ex-dwr25-front.jpg?v=1793554627"},{"product_id":"fema-atex-negative-pressure-switches-ex-vcm-ex-vnm-series","title":"FEMA Ex-VCM\/Ex-VNM | ATEX Negative Pressure Switches | ATEX + IECEx, SIL 2","description":"\u003cp\u003eFEMA Ex-VCM and Ex-VNM negative pressure switches detect the pressure difference relative to atmospheric pressure in explosion-protected installations. All switching ranges and scale values are expressed as the difference between the local atmospheric pressure and the set point, with zero on the scale equal to atmospheric pressure. Both series are certified to ATEX 2014\/34\/EU and IECEx.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eScale zero corresponds to local atmospheric pressure\u003c\/li\u003e\n\u003cli\u003eCalibrated for falling pressure; reset point higher by the differential\u003c\/li\u003e\n\u003cli\u003eRobust seawater-resistant die-cast aluminium GD AlSi12 housing\u003c\/li\u003e\n\u003cli\u003eIBExU12ATEX1040 and IECEx IBE 14.0077\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138098720881,"sku":"EX-VCM-EX-VNM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-ex-vcm095-ex-vcm-mechanical-pressure-switch-primaryimage.jpg?v=1793554628"},{"product_id":"fema-lpg-maximum-pressure-limiter-external-interlock-fd16-326","title":"FEMA FD16-326 | LPG Maximum Pressure Limiter, External Interlock | 3-16 bar, Ex-i, external interlock","description":"\u003cp\u003eThe FEMA FD16-326 is a maximum-pressure limiter for liquid gas installations with an external interlock: after a cut-out and a pressure drop of about 0.5 bar, it is released with the unlocking button in the control cabinet. Its switching pressure is adjustable from 3 to 16 bar, and all wetted parts are stainless steel 1.4104 and 1.4571. It must be used only with an isolating amplifier, never on mains voltage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSelf-monitoring sensor switches to the safe side if the bellows rupture\u003c\/li\u003e\n\u003cli\u003eEx-i intrinsically safe circuit when used with an isolating amplifier\u003c\/li\u003e\n\u003cli\u003eLine-break and short-circuit monitoring through a built-in resistor combination\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium GD AlSi12 switch housing\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138098753649,"sku":"FD16-326","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-fd16-326-maximum-pressure-limiter-primaryimage.jpg?v=1793554629"},{"product_id":"fema-lpg-maximum-pressure-limiter-internal-interlock-fd16-327","title":"FEMA FD16-327 | LPG Maximum Pressure Limiter, Internal Interlock | 3-16 bar, Ex-i, internal interlock","description":"\u003cp\u003eThe FEMA FD16-327 maximum-pressure limiter for liquid gas systems has an internal interlock: once pressure has fallen by about 2.5 bar after a cut-out, it is reset by pressing the red button on the scale side with a tool. Switching pressure is adjustable from 3 to 16 bar, set with the spindle after removing the terminal box. It operates only together with an isolating amplifier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWetted parts in stainless steel 1.4104 and 1.4571\u003c\/li\u003e\n\u003cli\u003eSelf-monitoring sensor of special construction to VdTÜV Memorandum Pressure 100\u003c\/li\u003e\n\u003cli\u003eEx-i explosion protection with isolating amplifier\u003c\/li\u003e\n\u003cli\u003eMonitors the control circuit for line break and short circuit\u003c\/li\u003e\n\u003cli\u003eSIL 2 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138106978417,"sku":"FD16-327","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-fd16-327-s-pressure-limiter-primaryimage.jpg?v=1793554630"},{"product_id":"fema-steam-and-hot-water-pressure-limiters-sdbam-series","title":"FEMA SDBAM | Steam and Hot-Water Pressure Limiters | Internal interlock, -20 to 70 °C, SIL 2","description":"\u003cp\u003eFEMA SDBAM pressure limiters provide maximum-pressure limiting with an internal interlock for steam and hot-water systems to TRBS, DIN EN 12828, DIN EN 12952-11 and DIN EN 12953-9. The special-construction switch uses a self-monitoring sensor built to PED 2014\/68\/EU and has a TÜV-verified bursting pressure of at least 100 bar. Ambient rating is -20 to 70 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal interlock after maximum-pressure cut-out\u003c\/li\u003e\n\u003cli\u003eCalibrated so switching occurs at the set point under rising pressure\u003c\/li\u003e\n\u003cli\u003eSPDT microswitch, 5 A inductive \/ 8 A resistive\u003c\/li\u003e\n\u003cli\u003eG1\/4 internal \/ G1\/2 external connection\u003c\/li\u003e\n\u003cli\u003eTÜV approval and SIL 2 to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138107011185,"sku":"SDBAM-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-sdbam-pressure-limiter-primaryimage.jpg?v=1793554631"},{"product_id":"fema-electronic-pressure-switches-with-relay-pst-r-series","title":"FEMA PST-R | Electronic Pressure Switches with Relay | 0.5% FS, relay output, IP65","description":"\u003cp\u003eFEMA PST...-R electronic pressure switches combine a relay output with an absolute or relative pressure sensor and an overall accuracy of 0.5% of full scale. They serve plant engineering, fluidics, pneumatics and process engineering, and monitor pumps and compressors as minimum, maximum or window monitors. A standardised 20 mA warning output flags implausible set points, sensor faults, overload and overheating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelay assignable to channel 1, channel 2 or the warning output\u003c\/li\u003e\n\u003cli\u003eSPDT gold-plated silver contact: 24 V DC 60 mA; 230 V 3(1) A with silver contacts\u003c\/li\u003e\n\u003cli\u003ePressure peak filter plus pressure and switching simulation modes\u003c\/li\u003e\n\u003cli\u003eAmbient range -20 to 60 °C\u003c\/li\u003e\n\u003cli\u003eIP65; CE, EN 60335-1, EN 61326\/A1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138107043953,"sku":"PST-R-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-p1907080-pst-r-series-pressure-switch-primaryimage.jpg?v=1793554632"},{"product_id":"fema-piezoresistive-differential-pressure-transmitters-dptaq-series","title":"FEMA DPTAQ | Piezoresistive Differential Pressure Transmitters | 0-10 \/ 4-20 output, DIN rail, SIL 1","description":"\u003cp\u003eFEMA DPTAQ (D) piezoresistive differential pressure transmitters measure gaseous, non-aggressive media in air-conditioning, ventilation and building automation. They provide 0-10 or 4-20 output signals, mount on a DIN rail and operate from 0 to 50 °C ambient. Typical tasks include fan and filter monitoring, valve and damper control and air-flow control.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupplied with duct kit, 2 m of silicone hose and two joining pipes\u003c\/li\u003e\n\u003cli\u003e6 mm pressure connections\u003c\/li\u003e\n\u003cli\u003eScrew terminals for wires up to 1.5 mm²\u003c\/li\u003e\n\u003cli\u003eD versions add a digital display\u003c\/li\u003e\n\u003cli\u003eSIL 1 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138107076721,"sku":"DPTAQ-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dptaq8-left.jpg?v=1793554633"},{"product_id":"fema-differential-pressure-transmitters-dpte-series","title":"FEMA DPTE | Differential Pressure Transmitters | 18-30 V DC, piezoresistive, SIL 1","description":"\u003cp\u003eFEMA DPTE (D) differential pressure transmitters use a piezoresistive sensor to measure gaseous, non-aggressive media in ventilation, air-conditioning and building automation. They run from an 18-30 V DC supply and are stored at -10 to 70 °C. In the type code, E marks the standard type, S a symmetrical plus\/minus range and D a red LED digital display.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplications include fan, filter, valve and damper monitoring\u003c\/li\u003e\n\u003cli\u003eScrew terminal block for wires up to 1.5 mm²\u003c\/li\u003e\n\u003cli\u003eOptional red LED display on D versions\u003c\/li\u003e\n\u003cli\u003eCE to 2004\/108\/EC and EAC marked\u003c\/li\u003e\n\u003cli\u003eSIL 1 according to IEC 61508-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138107109489,"sku":"DPTE-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-dpte502-left.jpg?v=1793554634"},{"product_id":"fema-pressure-transmitters-2-wire-and-3-wire-pti-ptu-series","title":"FEMA PTI\/PTU | Pressure Transmitters, 2-Wire and 3-Wire | PTI 2-wire current, PTU 3-wire voltage","description":"\u003cp\u003eFEMA PTI and PTU pressure transmitters measure relative pressure in liquid and gaseous media. The PTI is a 2-wire device with an analogue current output, and the PTU is a 3-wire device with a voltage output. Typical fields of use are compressors, refrigeration plants and HVAC\/R systems, where a stable analogue pressure signal is needed by the controller. FEMA groups them with its pressure transmitters for gas and liquid applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRelative pressure measurement for liquids and gases\u003c\/li\u003e\n\u003cli\u003ePTI: 2-wire, analogue current signal\u003c\/li\u003e\n\u003cli\u003ePTU: 3-wire, analogue voltage signal\u003c\/li\u003e\n\u003cli\u003eSuited to compressors, refrigeration and HVAC\/R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138115301489,"sku":"PTI-PTU-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ptu10-left.jpg?v=1793554634"},{"product_id":"fema-differential-pressure-transducers-smart-sn-diff-series","title":"FEMA Smart SN DIFF | Differential Pressure Transducers | 0-100 mbar to 0-20 bar, 6 ranges","description":"\u003cp\u003eFEMA Smart SN DIFF microprocessor-based transducers measure differential and relative pressure in six ranges from 0-100 mbar to 0-20 bar. Their main uses are pump and filter monitoring and the accurate control of differential pressures. With a 100 ms cycle time, the manufacturer recommends a DMW surge reducer where shorter pressure surges occur.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisplays differential pressure in bar, Pa, psi and %\u003c\/li\u003e\n\u003cli\u003eWarning display with visible error codes for sensor fault, overload, overheating\u003c\/li\u003e\n\u003cli\u003eManual zero adjustment and 4-digit locking code\u003c\/li\u003e\n\u003cli\u003eGraphics display rotatable in 90° steps by software\u003c\/li\u003e\n\u003cli\u003eAmbient range -20 to 70 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138115334257,"sku":"SMART-SN-DIFF-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ptsdm3002v3-left.jpg?v=1793554636"},{"product_id":"fema-differential-pressure-transmitter-with-hmi-smart-sn-hmi-diff","title":"FEMA Smart SN HMI | Differential Pressure Transmitter with HMI | 2 x G1\/4, M12 plug, IP65","description":"\u003cp\u003eThe FEMA Smart SN HMI is a microprocessor-supported differential pressure transmitter with a swivelling operator display for precise recording and monitoring of system pressures. Pressure connects through two G1\/4 internal threads, and an M12x1 angle connector is included. Both 2-wire and 3-wire versions are offered for -20 to 70 °C ambient.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfigurable as minimum, maximum or window monitor\u003c\/li\u003e\n\u003cli\u003eAdjustable switch-on and switch-off delay; hysteresis set by set and reset points\u003c\/li\u003e\n\u003cli\u003eLCD graphics rotatable in 90° steps; HMI swivels 310°\u003c\/li\u003e\n\u003cli\u003eSelf-monitoring electronics\u003c\/li\u003e\n\u003cli\u003eIP65 with M12 connection; EMC to EN 61326, safety class II to EN 61010\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138115367025,"sku":"SMART-SN-HMI-DIFF","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-pthdm1002a2-smart-sn-hmi-differential-pressure-transmitter-primaryimage.jpg?v=1793554636"},{"product_id":"fema-electronic-pressure-transducers-smart-sn-series","title":"FEMA Smart SN | Electronic Pressure Transducers | -1...+1 to 0-40 bar, G1\/2","description":"\u003cp\u003eFEMA Smart SN microprocessor-supported transducers measure relative pressure in ranges from -1...+1 bar up to 0-40 bar. They install directly in the pressure line through a G1\/2 external thread and are aimed at mechanical engineering, supply engineering, environmental technology and HVAC. Versions exist for 2-wire, 3-wire and alternating-current operation, and all 2-wire versions are SIL 2 approved.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKeyboard and graphic display for entering switching points\u003c\/li\u003e\n\u003cli\u003eRestore function, manual zero and 4-digit locking code\u003c\/li\u003e\n\u003cli\u003eWarning display for sensor fault, overload and overheating\u003c\/li\u003e\n\u003cli\u003e100 ms cycle time; DMW surge reducer recommended for short surges\u003c\/li\u003e\n\u003cli\u003eAmbient range -20 to 80 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138115399793,"sku":"SMART-SN-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ptsrv1011a2-left.jpg?v=1793554638"},{"product_id":"fema-compact-air-flow-monitors-ksl-series","title":"FEMA KSL | Compact Air Flow Monitors | Potentiometer set point, LED status","description":"\u003cp\u003eFEMA KSL compact flow monitors measure air flow in ducts and switch when it falls below a set point, which is adjusted precisely with a potentiometer. Signal evaluation takes place inside the unit, so no extra space is needed in the control cabinet. They suit ventilation and air-conditioning plants for monitoring fans, air intakes and dampers, and clean-room air locks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYellow LED shows the switching state\u003c\/li\u003e\n\u003cli\u003eNo mechanical moving parts to wear\u003c\/li\u003e\n\u003cli\u003eSensor tip must be fully immersed in the air stream\u003c\/li\u003e\n\u003cli\u003eFor air and non-combustible, non-aggressive gases\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138115432561,"sku":"KSL-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ksl24-left.jpg?v=1793554638"},{"product_id":"fema-compact-liquid-and-gas-flow-monitors-ksw-series","title":"FEMA KSW | Compact Liquid and Gas Flow Monitors | Up to 35% glycol, 1.4305 sensor","description":"\u003cp\u003eFEMA KSW compact flow monitors check the flow of liquids and gases in pipes and switch when it drops below the set point, which is tuned with rough and fine potentiometers. They are especially suited to cooling and heating circuits with up to 35% glycol and help prevent pumps from running dry. Wetted material is 1.4305 stainless steel, and lightly contaminated media are tolerated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYellow LED switching-state indicator\u003c\/li\u003e\n\u003cli\u003eNo moving parts; sensor element sits in the flow\u003c\/li\u003e\n\u003cli\u003eUsable for aqueous alkaline solutions where 1.4305 is compatible\u003c\/li\u003e\n\u003cli\u003eRoutine cleaning advised, as deposits can shift the switching point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123624561,"sku":"KSW-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ksw24-left.jpg?v=1793554640"},{"product_id":"fema-paddle-air-flow-monitor-for-ducts-s6040a1003","title":"FEMA S6040A1003 | Paddle Air Flow Monitor for Ducts | Air and non-aggressive gases","description":"\u003cp\u003eThe FEMA S6040A1003 air flow monitor checks the flow of air and non-aggressive gases in the ducts of air-conditioning and air-purification systems. FEMA lists the S6040 among its paddle flow switches for air, used to confirm that air is moving in HVAC equipment. It is the type code named on the S6040 series page for ventilation systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePaddle flow switch for air (S6040 series)\u003c\/li\u003e\n\u003cli\u003eFor air and non-aggressive gases\u003c\/li\u003e\n\u003cli\u003eDuct installation in air-conditioning systems\u003c\/li\u003e\n\u003cli\u003eAlso suited to air-purification plants\u003c\/li\u003e\n\u003cli\u003eListed by FEMA for ventilation and air-conditioning flow monitoring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123657329,"sku":"S6040A1003","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/ba-bms-s6040-ge51colres.jpg?v=1793554641"},{"product_id":"fema-paddle-flow-monitors-for-liquids-s6065-series","title":"FEMA S6065A | Paddle Flow Monitors for Liquids | Flow 100 tested, SPDT microswitch","description":"\u003cp\u003eFEMA S6065A paddle flow monitors, tested to notice Flow 100, are designed for coolant flow in air-conditioning and refrigeration systems, and the V4A version also handles aggressive liquids. Units ship preset to the lowest switching range; turning the adjusting screw clockwise near the terminals raises it. A table of switching values gives reset points, switching points and paddle sizes for different pipe diameters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFully encapsulated SPDT changeover microswitch with high current capacity\u003c\/li\u003e\n\u003cli\u003eV4A version for aggressive liquids\u003c\/li\u003e\n\u003cli\u003eAdjustable switching range via adjusting screw\u003c\/li\u003e\n\u003cli\u003eLow-cost flow monitoring for HVAC installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123690097,"sku":"S6065-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-liquid-flow-switch-primaryimage.jpg?v=1793554641"},{"product_id":"fema-calorimetric-air-flow-monitors-swl-series","title":"FEMA SWL | Calorimetric Air Flow Monitors | SLF sensor + ASL unit, 2-60 s bypass","description":"\u003cp\u003eFEMA SWL air flow monitoring pairs an SLF sensor with an ASL evaluation unit to monitor air flow, for example in air-conditioning systems. It works calorimetrically: a heated thermistor loses heat to the passing air, and a second thermistor compensates for medium temperature to keep the switching point stable. An adjustable 2-60 s start-up bypass covers fan run-up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable switching point\u003c\/li\u003e\n\u003cli\u003eSwitch-on bypass adjustable from 2 to 60 s\u003c\/li\u003e\n\u003cli\u003eTemperature-compensated by a second thermistor\u003c\/li\u003e\n\u003cli\u003eHeat drawn off by the air changes the thermistor resistance, which the unit evaluates\u003c\/li\u003e\n\u003cli\u003eClean the sensor routinely, as deposits can affect the switching point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123722865,"sku":"SWL-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-asl453-24-left.jpg?v=1793554643"},{"product_id":"fema-liquid-flow-monitoring-system-sww-series","title":"FEMA SWW | Liquid Flow Monitoring System | SWF62\/SWF62L sensor + ASW454 unit","description":"\u003cp\u003eThe FEMA SWW series monitors flow in liquids and piped gaseous media with an SWF62 or SWF62L flow sensor connected to an ASW454 evaluation unit. Sensitivity is set accurately with rough and fine potentiometers, and an LED shows the switching state. The sensor element must sit in the flow to give a reliable signal. FEMA describes its electronic liquid flow switches as detecting the speed of the liquid and switching an electric circuit when it deviates from the preset value.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlow sensors SWF62 and SWF62L\u003c\/li\u003e\n\u003cli\u003eSeparate ASW454 evaluation unit\u003c\/li\u003e\n\u003cli\u003eRough and fine potentiometer sensitivity adjustment\u003c\/li\u003e\n\u003cli\u003eLED switching-state indication\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123755633,"sku":"SWW-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-asw454-left.jpg?v=1793554644"},{"product_id":"fema-electronic-frost-protection-thermostat-ftse-series","title":"FEMA FTSE | Electronic Frost Protection Thermostat | 2 m and 6 m capillary","description":"\u003cp\u003eThe FEMA FTSE is an electronic frost protection thermostat offered with a 2 m or 6 m capillary tube. It is fitted on the air side to protect air-conditioning units, heat exchangers, radiators and similar equipment from frost or freezing damage. The FTSE extends the electromechanical FEMA frost thermostat line with an electronic device. FEMA positions its frost protection thermostats for air heaters and heat exchangers, alongside thermostats that control air temperature in industrial areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectronic frost protection thermostat\u003c\/li\u003e\n\u003cli\u003eCapillary tube lengths of 2 m or 6 m\u003c\/li\u003e\n\u003cli\u003eAir-side installation\u003c\/li\u003e\n\u003cli\u003eProtects AC units, heat exchangers and radiators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123788401,"sku":"FTSE-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/ba-bms-ftse-ge51colres.jpg?v=1793554644"},{"product_id":"fema-single-stage-frost-protection-thermostats-ft69-series","title":"FEMA FT69 | Single-Stage Frost Protection Thermostats | 1.8, 3 or 6 m capillary","description":"\u003cp\u003eFEMA FT69 single-stage protection thermostats sense temperature along the whole capillary in air heating and climate control systems. If any 30 cm section of the capillary falls below the set point, or if the capillary is damaged, the thermostat switches off. The 3 m and 6 m versions come with six mounting retainers and the 1.8 m version with three.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eResponds to any 30 cm capillary section below the set point\u003c\/li\u003e\n\u003cli\u003eFails safe if the capillary is damaged\u003c\/li\u003e\n\u003cli\u003eCapillary must be looped evenly across the duct cross-section\u003c\/li\u003e\n\u003cli\u003eFluid reservoir in the head is also temperature-sensitive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123821169,"sku":"FT69-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-ft69-series-single-stage-frost-protection-thermostat-primaryimage.jpg?v=1793554645"},{"product_id":"fema-room-thermostats-single-and-dual-stage-t6120-series","title":"FEMA T6120A\/B | Room Thermostats, Single and Dual Stage | IP54 or IP65, copper or stainless sensor","description":"\u003cp\u003eFEMA T6120A and T6120B room thermostats measure, monitor and control temperature in heating and cooling systems, in single-stage and dual-stage versions. They use liquid-filled copper or stainless steel sensors and come in IP54 or IP65 housings. Copper-sensor versions also suit damp locations, chillers and freezers. Typical sites include commercial buildings, storage premises, factories and indoor agricultural areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDustproof encapsulated microswitch with changeover contact\u003c\/li\u003e\n\u003cli\u003eSingle-stage and dual-stage versions\u003c\/li\u003e\n\u003cli\u003eRobust IP54 or IP65 construction\u003c\/li\u003e\n\u003cli\u003eFor warehouses, machine rooms, garages, greenhouses and livestock buildings\u003c\/li\u003e\n\u003cli\u003eSimple installation and wiring\u003c\/li\u003e\n\u003cli\u003eCopper-sensor versions for damp locations, chillers and freezers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123853937,"sku":"T6120-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-t6120b1003-left.jpg?v=1793554646"},{"product_id":"fema-safety-strap-on-thermostats-stw-stb-series","title":"FEMA STW\/STB | Safety Strap-On Thermostats | Pipes to 100 mm, DIN EN 14597","description":"\u003cp\u003eFEMA STW and STB safety strap-on thermostats are self-monitoring temperature monitors and limiters, for example in floor-heating systems. If the capillary leaks, the device reacts as if the set point were exceeded and switches to the safe state, such as stopping the circulation pump. Each unit ships with a strap for pipes up to 100 mm in diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSelf-monitoring sensor system that switches to the safe state if expansion fluid leaks\u003c\/li\u003e\n\u003cli\u003eWall mounting via the capillary; optional immersion well\u003c\/li\u003e\n\u003cli\u003eAutomatic temperature compensation\u003c\/li\u003e\n\u003cli\u003ePush-In contacts for quick wiring\u003c\/li\u003e\n\u003cli\u003eCE, UL, PED and DIN EN 14597\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123886705,"sku":"STW-STB-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-stw70130-left.jpg?v=1793554647"},{"product_id":"fema-single-stage-duct-hygrostat-h6045a1002","title":"FEMA H6045A1002 | Single-Stage Duct Hygrostat | Single stage, duct mounting","description":"\u003cp\u003eThe FEMA H6045A1002 is a single-stage duct hygrostat for monitoring relative humidity in air-conditioning systems and climatic chambers, and for switching humidifiers and dehumidifiers in indoor swimming pools. It is also used in food storage, textile, paper, printing, optical and chemical industries, greenhouses and hospitals. A dustproof encapsulated microswitch provides high switching capacity, and the simple, robust build gives a low-cost option for HVAC systems. The H6120A1000 is the room-mounted counterpart on the same series page.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSingle-stage duct-mounted hygrostat\u003c\/li\u003e\n\u003cli\u003eDustproof encapsulated microswitch\u003c\/li\u003e\n\u003cli\u003eSimple, robust construction for HVAC systems\u003c\/li\u003e\n\u003cli\u003eControls humidifiers and dehumidifiers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138123919473,"sku":"H6045A1002","price":0.0,"currency_code":"AED","in_stock":false}]},{"product_id":"fema-single-stage-room-hygrostat-h6120a1000","title":"FEMA H6120A1000 | Single-Stage Room Hygrostat | Single stage, room mounting","description":"\u003cp\u003eThe FEMA H6120A1000 single-stage room hygrostat measures and controls relative humidity in rooms, for example to switch air humidifiers and dehumidifiers in indoor swimming pool buildings. Other uses include food stores, greenhouses, hospitals, printing works and the textile and paper industries. Its dustproof encapsulated microswitch has a high switching capacity, and the H6045A1002 on the same series page is the duct-mounted version. The design is simple and robust for heating, ventilation and air-conditioning use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSingle-stage, room-mounted hygrostat\u003c\/li\u003e\n\u003cli\u003eDustproof encapsulated microswitch\u003c\/li\u003e\n\u003cli\u003eRobust, low-cost construction for HVAC\u003c\/li\u003e\n\u003cli\u003eFor humidity control in storage and production rooms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138132111473,"sku":"H6120A1000","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-h6120a1000-left.jpg?v=1793554649"},{"product_id":"fema-stainless-steel-pt100-temperature-sensors-p-pt100-series","title":"FEMA P Pt 100 | Stainless Steel Pt100 Temperature Sensors | -50 to +400 °C, Class A, 3-wire","description":"\u003cp\u003eFEMA P series Pt 100 temperature sensors are made entirely from 1.4571 stainless steel and cover a temperature range of -50 to +400 °C. The sensing element is a Pt 100 to Class A of DIN IEC 751 with a 3-wire connection. They are installed in a thermowell for machine and plant temperature measurement. FEMA notes that all medium-contact parts are stainless steel for durability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePt 100 Class A element to DIN IEC 751\u003c\/li\u003e\n\u003cli\u003e3-wire connection\u003c\/li\u003e\n\u003cli\u003eAll-stainless 1.4571 construction\u003c\/li\u003e\n\u003cli\u003eMeasuring range -50 to +400 °C\u003c\/li\u003e\n\u003cli\u003eIn-well mounting for machine and plant duty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138132144241,"sku":"P-PT100-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hbt-bms-p100-100-p-series-pt-100-temperature-sensor-primaryimage.jpg?v=1793554650"},{"product_id":"fema-cable-type-bulb-temperature-sensors-ktf-series","title":"FEMA KTF | Cable-Type Bulb Temperature Sensors | Pt1000\/NTC\/Ni1000, IP65, 2 m cable","description":"\u003cp\u003eKTFxx cable-type bulb temperature sensors, listed under FEMA and Honeywell, work as immersion sensors or duct air sensors in hot and cold water installations. They are available with Pt1000, NTC 10k, NTC 20k or Ni1000 elements and have IP65 stainless steel probes on a 2 m cable. The new design has no spring, which the smaller WS and WM immersion wells do not need.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePt1000, NTC 10k, NTC 20k or Ni1000 sensing elements\u003c\/li\u003e\n\u003cli\u003eStainless steel probe, IP65\u003c\/li\u003e\n\u003cli\u003eImmersion or duct air use\u003c\/li\u003e\n\u003cli\u003eFor old VFxx wells, order the VF-SPRING accessory\u003c\/li\u003e\n\u003cli\u003eCE and EAC marked\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138132177009,"sku":"KTF-SERIES","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-ktf20-65-2m-left.jpg?v=1793554651"},{"product_id":"fema-npt-adapter-for-pressure-switches-npt-adapter","title":"FEMA NPT Adapter | NPT Adapter for Pressure Switches | Sealing washer included","description":"\u003cp\u003eThe FEMA NPT adapter connects pressure switches, pressure transmitters and pressure gauges to NPT threaded process connections. A matching sealing washer is supplied with the adapter. It is listed among FEMA's accessories for pressure switches and transmitters, and lets FEMA devices be fitted on pipework that uses NPT threads. The page lists no thread sizes, so confirm the required size with General Tech Shop before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdapts pressure devices to NPT threads\u003c\/li\u003e\n\u003cli\u003eSuitable for pressure switches, transmitters and gauges\u003c\/li\u003e\n\u003cli\u003eSealing washer included\u003c\/li\u003e\n\u003cli\u003ePart of the FEMA pressure switch accessory range\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138132209777,"sku":"NPT-ADAPTER","price":0.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/hon-ba-bms-nptprimary.jpg?v=1793554652"},{"product_id":"fema-pressure-mediator-diaphragm-seal-one-switching-point-diaphragm-seal-1sp","title":"FEMA Diaphragm Seal | Pressure Mediator \/ Diaphragm Seal, One Switching Point | M 20 fill, -40 to +300 °C","description":"\u003cp\u003eThe FEMA one-switching-point pressure mediator, or diaphragm seal, keeps aggressive, viscous or crystallising media away from the pressure sensor of a switch or gauge. A transmission fluid carries the process pressure from the separating membrane to the measuring element. The M 20 filling medium is food-safe and withstands -40 to +300 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeparates difficult media from the pressure sensor\u003c\/li\u003e\n\u003cli\u003eAvoids dead spaces where supply lines must be easy to clean\u003c\/li\u003e\n\u003cli\u003eForms a self-contained unit with the pressure switch or gauge\u003c\/li\u003e\n\u003cli\u003eFood-safe M 20 fill, -40 to +300 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FEMA","offers":[{"title":"Default Title","offer_id":68138132275313,"sku":"DIAPHRAGM-SEAL-1SP","price":0.0,"currency_code":"AED","in_stock":false}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/collections\/fema-logo-300w.jpg?v=1793554623","url":"https:\/\/www.generaltechshop.sa\/collections\/fema.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}